Description While drill-press tables are nothing new in metalworking shops, it’s surprising they haven’t been more widely adopted by woodworkers, as they bring improved accuracy, safety and convenience to a range of tasks. We designed ours to be compatible with most major brands of drill presses without modification. This table and fence set fits any drill press with a swing of 14" or greater (7" from bit to column) and comes supplied with all mounting hardware needed for installation in either through-slots or blind T-slots. Precisely milled from 18mm Baltic birch plywood with a low-friction laminate surface, the sturdy 15 1/2" × 23" table top provides stable support for your work. It has two keyhole slots for mounting the included fence, as well as four standard 3/4" dog holes for clamps, dogs or other accessories. To support through-drilling, an opening in the middle accepts a 4" square sacrificial wooden insert (one supplied; replacements can be easily made from any 6mm or 1/4" wooden sheet material). The 20" machined aluminum fence permits accurate, repeatable stock positioning, and comes with hardware for mounting on the table (or in a pair of standard T-tracks or keyhole slots on other workshop fixtures). It has a pair of laminate-clad sub-fences (each 10 1/2" long) that can be opened to allow off-edge drilling, and a T-slot track on top for mounting jigs and accessories (such as the Veritas 1 1/2" flip stop). Straightforward to mount and use, this is a practical, well-made upgrade to a woodworking drill press. Made in Canada.
These pantry storage tips will help you take advantage of every nook and cranny to help you organize and cut the clutter.
This space-generating cabinet nests around the column of a floor-standing drill press, reclaiming storage for your drill bits and other small accessories. The large storage space behind the doors hides bulkier items. Plus, the unit rolls out of the way on casters so you can lower the table when needed. Benchtop drill presses park conveniently on the top, and with the notches left in place, the cabinet is ready to upgrade to a floor-standing model whenever you are.
JET J-2530 15 In. Bench Model Drill Press 3/4 HP 115 V The J-2530 15 In. bench drill press boasts a 3/4 HP motor and tilting table. Simple yet powerful, the J-2530 has a cast iron head and large quill - allowing greater accuracy. California Proposition 65 Warning. View Warning Label
Bosch drill press handle: designed by Australian woodworker Derek Lark See video https://youtu.be/Kin4Posim6U Included in sale is all the hardware needed. Simple attach to your drill press The auxiliary handle for the Bosch PBD-40 solves the problem of easily rotating the large roller wheel that comes as standard, which is often difficult to use. Turn the drill press into something more akin to a standard drill press with their three star handle. that It allows much easier operation on repetitious cuts and better control for precise drilling. The auxiliary handle is easily attached to the existing wheel, no additional holes are required and it can be positioned anywhere on the outer ring. It can be readily repositioned if desired by simply loosening the screws and sliding it along the wheel. Here is an unsolicited testimonial from a client with a furniture manufacturing business in Melbourne "Our small workshop love the addition to the drill press. Well designed and ergonomic. Well done, fantastic job"
Description This is an outstanding benchtop drill press. Its drive mechanism makes speed adjustments a breeze, allowing you to make changes on the fly to match bit diameter and density of material. You simply select a speed range (150 to 700 rpm or 600 to 2800 rpm) by moving the drive belt between pulleys, then use a control arm to set a precise speed within that range. A digital display gives you a readout of the speed, and the powerful motor provides sufficient torque at low rpm to avoid risk of stalling. The quill has a large range of travel, so you can use long bits without having to reposition the work. The depth stop holds its setting reliably and has a direct-reading scale. Larger than most, the table provides a broad, stable surface and has a smooth rack-and-pinion mechanism for height adjustments. It tilts 45° to either side and rotates 360° for easier set-up when work is clamped in place. An integral LED work light illuminates the entire table surface, and intersecting laser lines indicate the center axis. With substantial iron castings and a thick-walled steel column to provide the mass needed to dampen vibration, this is a sturdy, well-built machine. Backed by a 5-year manufacturer's warranty.
Metabo MAG32 Magnetic Core Drill Press Large stroke, therefore suitable for using core drills, spiral drills and countersinks. Magnetic base with high holding power permits working on vertical surfaces and overhead. California Proposition 65 Warning.
The Shop Fox W1668 13-1/4" Oscillating Drill Press was awarded Top Value by WOOD Magazine because of its versatility. The W1668 can be used for efficient contour sanding in addition to traditional drilling, saving you the cost of buying a separate sander. As one grizzly.com customer review mentions, "this Benchtop Oscillating Drill Press is a good compromise for a small shop without room for two separate devices." The W1668 is fitted with a 1 to 16mm JT33 keyed drill chuck, offers up to 3-1/8" of travel, and a drilling capacity of 5/8" through mild steel. With the oscillating feature, the oscillating stroke length is 3/4". The 12-3/8" diameter, round table allows for drilling and surface sanding at different angles as it tilts 90° in both directions. The table has a clearance hole for use while sanding. This clever design incorporates a 2" dust collection port so that sanding is less messy."}},"base-catalog-309625973":{"__typename":"BaseProduct Motor: 1/2 HP, 110-Volt Swing: 34 in. Drill chuck: 1/16 in. to 5/8 in. Arbor: JT-33 Spindle travel: 3-1/4 in. Range of speeds: 550 RPM to 3470 RPM
T32707 Magswitch Drill Press Fence Pro Increase your precision drilling with this simple-to-use fence. Powerful magnets allow quick positioning and fine adjustment of the T32708 Magswitch Drill Press Fence and make it easy to remove and store when a fence is not needed. The magnets can be positioned at different points on the fence for optimal placement on drill press tables. The sturdy large vertical plate will not interfere with the drill chuck, even when drilling holes close to the fence, and can be used as a bandsaw resaw fence. The stop block can be quickly be positioned flush with the drill press table or sacrificial material under the workpiece and can be stored out of the way when it is not needed. When the drill press fence is not needed, it can be placed at the back of the drill press table with the magnets on. The fence plate is 21" long by 4-5/16" high. Magswitch products come with a one-year warranty for product defect through the manufacturer.
Description There are plenty of tool trays and holders for keeping drill bits, countersinks and other small items within reach of your drill press, but most of them are made of plastic or metal. Our tool holder is made of 18mm thick Baltic birch plywood, making it simple to adapt to your specific needs – you can enlarge the provided holes, drill new ones or make more substantial modifications using standard woodworking tools. The 10 1/2" × 5 1/2” shelf comes with seventeen blind holes for 1/4" shanks, six for 3/8" shanks and six for 1/2" shanks, as well as a 3/8" through-drilled hole for the chuck key and a shallow 1 3/4" × 2 3/4" pocket for odds and ends. It also has a 3/4" through-hole that lets you use our lamp bushing or LED work light mounting plate and post to focus more light on your work. Easily attached to any drill press column from 2 1/2" to 3 1/4" in diameter, it is a convenient addition to your drill press, whether used as an everyday catch-all or for storing your most frequently-needed items.
Champion Cutting Tool Large Capacity Magnetic Drill Press The AC120 SuperBrute Mag Drill is engineered for extreme steel fab applications. Users can drill up to 4-3/4 In. dia and up to 4 In. depth. Operators will experience smooth, heavy duty cutting due to a powerful 1700W motor and strong 7200 lb magnet. By investing in the AC120, users will have the convenience of using annular cutters plus additional cutting tools like twist drills, maintenance reamers, bridge reamers, and taps. The AC120 includes 3/4" arbor, 1-1/4" arbor, coolant tank assembly and drill/chuck adaptor. Rugged, powerful, and easy to use, the AC120 SuperBrute is the ultimate solution for serious users tackling tough steel jobs. California Proposition 65 Warning. View Warning Label
This Drill Press Stand is the perfect addition to organize all your drill press accessories and adds mobility to an essential shop tool. Five drawers create a ton of storage options. The cabinet is 16-1/2” wide, 25” deep and stands 34-1/2” tall with casters installed and can be made from just 1 sheet of 3/4" plywood, a little over a half sheet of 1/4" plywood, and some solid wood trim. You will get a 9 page PDF Plan of Cut Diagrams, Parts Lists, and 3D diagrams with detailed steps to build the project. Measurements are in imperial, not metric. THIS IS A DIGITAL DOWNLOAD ONLY, NOTHING WILL BE MAILED.
Discover Precision and Power with the Powermatic 2815BT Variable Speed Benchtop Drill Press Consistency Redefined: Experience precision like never before! The PM2815BT Precision Drill Press boasts a gear-driven spindle that guarantees consistent torque across its entire operational range. Even when tackling the most challenging materials, this gear drive minimizes inertia, propelling this drill press to world-class performance levels within its size category. Accuracy Beyond Measure: Take control with real-time precision. The large LED Digital Read Out provides instant feedback on your bit's RPM, while laser cross-hairs pinpoint the exact spot where your bit will meet your workpiece. Achieve unmatched accuracy effortlessly. Quality That Endures: At Powermatic, quality is our heritage. Crafted meticulously from handles to motor, the Powermatic drill press benchtop exemplifies excellence. It's not just a machine; it's a commitment to durability. Rely on it as your trustworthy workshop companion for years to come. Features Gear driven power transfers torque consistently and efficiently for a wide range of materials Electronic variable speed from 250-3000 RPM Laser cross hairs provide unbeatable accuracy and precise tool point indication Highly visible digital readout gives users precise speed control Powermatic quality in a benchtop size with 5" of total quill travel Specifications Stock Number PM1-34 Chuck Size (In.) 5/8 Model Number PM2815BT Overall Dimensions (L x W x H) (In.) 14.17x23.22x47.24 Prop 65 Cancer and Reproductive Harm Spindle Distance to Table (Max.) (In.) 14.43 Spindle Travel (In.) 5 Swing (In.) 15 Weight (Lbs.) 128.43
Getting the Angle Right With a Power Drill!: Drill presses are great. If you have one, by all means use it! If you don't, have no fear! This instructable is for you! Even if you have a drill press, what if you want a nice, perpendicular hole in the ceiling? In the wall? In the middle of a …
Description While drill-press tables are nothing new in metalworking shops, it’s surprising they haven’t been more widely adopted by woodworkers, as they bring improved accuracy, safety and convenience to a range of tasks. We designed ours to be compatible with most major brands of drill presses without modification. This table and fence set fits any drill press with a swing of 12" or greater (6" from bit to column) and comes supplied with all mounting hardware needed for installation in either through-slots or blind T-slots. Precisely milled from 18mm Baltic birch plywood with a low-friction laminate surface, the sturdy 10 1/2" × 15 1/2" table top provides stable support for your work. It has two keyhole slots for mounting the included fence, as well as two standard 3/4" dog holes for clamps, dogs or other accessories. To support through-drilling, an opening in the middle accepts a 4" square sacrificial wooden insert (one supplied; replacements can be easily made from any 6mm or 1/4" wooden sheet material). The 14" machined aluminum fence permits accurate, repeatable stock positioning, and comes with hardware for mounting on the table (or in a pair of standard T-tracks or keyhole slots on other workshop fixtures). It has a pair of laminate-clad sub-fences (each 7 1/2" long) that can be opened to allow off-edge drilling, and a T-slot track on top for mounting jigs and accessories (such as the Veritas 1 1/2" flip stop). Straightforward to mount and use, this is a practical, well-made upgrade to a woodworking drill press. Made in Canada.
These DIY cloud shelves are going to be an adorable addition to the nursery and were an amazing beginner scroll saw project!
Few jobs in the shop result in tired arms and banged knuckles like making large changes to the height of a drill-press table.
Integrated depth stop makes repetitive drilling quick and easy Large cast iron base provides stability One-handed belt tensioning allows for rapid speed changes CA Residents: Prop 65 Warning(s)
The Jet® JDP-15B Benchtop Drill Press is a robust and reliable drilling machine designed for professional and home use. The JDP-15B features a powerful 3/4 horsepower motor, which can deliver speeds of up to 3,500 RPM, making it ideal for a wide range of drilling applications. The 16-speed poly-v belt drive system allows you to tailor the rate to your drilling needs. The sturdy cast iron head and base ensure stability and durability during use. Additionally, the JDP-15B has a large 12-1/2" by 17" worktable, which can be tilted up to 45 degrees in either direction, giving you the flexibility to drill at various angles. One of the standout features of the JDP-15B is its depth stop system which allows you to set the depth of your drill bit, ensuring consistent and accurate drilling depths every time. Additional features include a laser guide system, a built-in work light, a drill chuck with a key, and a convenient storage tray for your tools and accessories. Overall, the JDP-15B is a versatile and reliable drilling machine that is perfect for anyone who needs to drill precise and consistent holes in a variety of materials. Features: Change speeds quickly with the one-handed belt tensioning Spindle travels a full 3-1/8" with one revolution of the handle Power switch features a safety key and large, paddle-style off button Integrated depth stop makes repetitive drilling quick and easy Xacta-X laser system easily identifies the drill center Long-lasting, built-in LED work light reduces shadows Table edge lip designed to make clamping easy Replaceable MDF table insert Large cast iron base provides stability Specifications: Product: Drill Press Product Style: Benchtop Motor Type: TEFC Power Transfer: 2 poly v-belts Motor Power: 3/4 HP Motor Phase: Single Motor Voltage: 115V Motor Amps: 9A Recommended Circuit Size: 15A Number of Spindle Speeds: 16 Maximum No-Load Spindle Speed Range: 210-3500 RPM Swing: 15" Maximum Spindle Travel: 3-1/8" Maximum Spindle Distance to Table: 18-1/2" Maximum Spindle Distance to Base: 26-7/8" Spindle Taper: MT2 Chuck Style: Keyed Chuck Size: 5/8" Chuck Arbor Taper: JT-3 to MT-2 Maximum Chuck Distance to Table: 14-1/2" Maximum Chuck Distance to Base: 22-7/8" Column Diameter: 2-3/4" Table Size (L x W): 12-1/2" x 17" Table Tilt: 45° Left and Right Base Size (L x W x H): 18" x 11-3/8" x 2-1/4" Overall Assembled Dimensions (L x W x H): 26-5/6" x 17" x 43-7/8" Work Lamp: Integrated, pivoting LED Weight: 154 lbs. What's Included: (1) Jet® 15" Benchtop Drill Press - 3/4 HP 1 Ph 115V - JDP-15B Shipping / Billing Information All shipments must be inspected and any damage reported within 3 days of receipt. Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges. This product ships direct from the manufacturer: Your order will ship in 7-10 business days. This product is considered special order. Your account will be charged when you place your order. Express or overnight shipping is not available for this product. Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.
Description Box-making and modelmaking often require small parts that are too dangerous to run through a power jointer and difficult to joint with a hand plane; balancing a plane on pieces much smaller than its sole can be awkward. This hand jointing accessory for our medium and large shoulder planes lets you bring the work to the plane instead, giving you better control of the cut. The 10" × 2" low-friction HDPE (high-density polyethylene) fence makes it easy to align work square to the blade. Multiple mounting holes let you orient the plane for right- or left-hand use, securing it via the through-hole using a brass knob. The large bottom section of the panel provides plenty of surface area for clamping the hand jointer horizontally to a bench top or vertically in a front vise – a blade-up orientation that was favored by coopers for precisely jointing barrel staves. It also includes a pocket with an inset rare-earth magnet for holding a spare blade, useful for storing a blade sharpened at a higher bevel angle to deal with highly figured wood. A safe and accurate way to joint small parts.
Ever wondered how to put a decorative edge on a turned bead? The answer may be simpler than you think. WOOD magazine's Jim Heavey has another WOOD Shop Tip for you so shimmy on up, this will only take a few minutes
Do you think spaceships are great? Do you love to put stickers on things? Are you an aficionado of kitbashed or scratchbuilt models? If you answered yes to any of these questions, this sticker is the right choice for you. 2.25 in wide by 2.75 in tall, this matte vinyl sticker is ideal for sticking on your laptop, drill press, bathroom mirror, cutting machine, water bottle, face, stand mixer, or whatever else you can dream of. Purchase includes: One Atlas Sticker (2.25 in wide) One Sublight Drive Logo Sticker (1 in square)
RIKON 20in Floor Model Drill Press 20 In. floor drill press #30-240 is the largest model, valued by production shops for its robust design, extra-large table, chuck, base and wide speed range. This machine gives serious, basic operation that will take the heavy workloads demanded of it. California Proposition 65 Warning.
My auxiliary drill-press table adds a lot of surface area for better stock support than the small factory-supplied table.
The Rikon 12" Variable-Speed Drill Press - Model: Model 30-212VS, will sit on your bench but provide the power and accuracy of a much larger unit. The Vari-Speed pulley system allows for quick and easy changes on the fly to match the density of your material and the style and diameter of your drill bit. To select a speed range (150 to 700 RPM or 600 to 2800 RPM), move the drive belt between pulleys and use a control arm to set a precise speed within that range. A digital display gives you a readout of the speed, and the powerful motor provides sufficient torque at low rpm to avoid the risk of stalling. Additional features include a 5/8" chuck, LED work light, and a laser with X-Y guides. This drill press will significantly add to any shop without taking up floor space. Features: Powerful 3/4 HP motor LED digital display Variable spindle speeds with a range from 150 to 2800 RPM Large 9-1/2" x 9-1/2" table provides a broad, stable work surface Smooth rack-and-pinion mechanism for table height adjustments Drill chuck with a 1/32” - 5/8” holding capacity Depth stop holds its setting reliably and has a direct-reading scale X-Y guides to ensure accurate positioning of projects when drilling holes Bright LED work light spreads light onto your project where you need it most Specifications: Motor: 3/4 HP Amps: 5A Volts: 120V, 60 Hz Motor Speed (No Load): 1130 RPM Speed Range: Variable - 150-700 RPM & 600-2,800 RPM Swing: 11-13/16" Chuck Size: 5/8" Chuck Taper: JT3 Drilling Capacity: 1" Spindle Travel 3-5/32" Spindle taper: MT2 Head Rotation: 360° Quill Diameter: 1-9/16" Table Size: 9-1/2” x 9-1/2” Table Tilts: 45° Left & Right Table Rotation: 360° Maximum Chuck to Table: 12-3/16" Maximum Chuck to Base: 19-1/2" Column Diameter: 2-9/16" Height: 38-3/16" Base Size: 16-9/64” x 9-7/8” Net Weight: 102.5 lbs. Manufacturer's Warranty: 5 years What's Included: (1) Rikon® Model 30-212VS 12" Variable Speed Benchtop Drill Press (1) Manual & Warranty Card Shipping / Billing Information This product ships direct from the manufacturer: Your order will ship in approximately 7-21 business days. This product is considered special order. Your account will be charged when you place your order. Residential delivery fee applies for all LTL items. Express or overnight shipping is not available for this product. Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries. Return Information If you have a return issue, contact Woodcraft Supply customer service @ 1-800-535-4482 for return details. Customer pays return freight. When returning product, please include the invoice number or customer number and refer to the back of the invoice for shipping instructions. If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made. To be eligible for credit for returned Rikon goods, customers must comply with each of the following requirements: Written authorization to return any products must be obtained from the RIKON Power Tools Customer Service Department before the products are returned. RIKON Power Tools will issue a Return Goods Authorization Number (RGA#), which must be clearly marked on the shipping label and bill of lading with the returned goods. RIKON Power Tools Will Not Accept Any Unauthorized Returns. A 15% restock fee will apply. Warranty Information Rikon offers a 5 year warranty.Customers with warranty claims, defective or damaged goods should contact RIKON Power Tools before returning any product to the distributor. RIKON Power Tools reserves the right to ship parts to effect repairs or replace product, whichever they may deem appropriate. Request to return defective or damaged goods by distributors must be submitted to RIKON Power Tools and will be reviewed for product misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear before giving authorization to return said goods. Defective/Damaged goods that are returned to RIKON Power Tools and show misuse, abuse, negligence, accidents, repairs, alterations, lack of maintenance or normal wear and tear are subject to a restocking charge equal to 15% of the credit given for the returned goods or $25.00, whichever is greater.
Learn tips and tricks that make your shop time more productive. Find out how to get the most out of hand tools and power tools, including your router and table saw. See tips on finishing, gluing, clamping, sharpening, layout, and more!
