Madison R Holler compose, sous le nom Rubinski Works, des bijoux en perles tissées "peyote" enchâssées dans des formes géométriques en laiton.
Collier en acier inoxydable doré Composé de petites perles en turquoise africaine (couleur vert/kaki), dorées et de perles d'eau douce Ajustable de 37 à 44cm environ Résiste à l'eau, au soleil, à la vie quotidienne...
Le métier à tisser permet de se faire plaisir en réalisant des bracelets tendance. Voici 30 modèles de grilles de tissage de perles miyuki.
Colliers, bracelets, bagues, boucles d'oreilles... Découvrez des idées déco et astucieuses pour ranger ses bijoux simplement et efficacement.
Beaded Poppies Quick Reference: Flat Stitch Beading Basics https://www.tiktok.com/@sundaylacecreations/video/7160678576277228805?q=sundaylacecreations&t=1678292557161 *Pre-step Glue down/Sew down your pattern on the top of the beading foundation. Then place the middle black gem in the center, either gluing it down
★ SOLAR SYSTEM NECKLACE ★ A dainty and minimal stainless steel Solar System inspired necklace. The pendant is 33 x 20mm will come on an 18" Sterling Silver chain (20" also available, please message for details). Style Details: ★ Materials: Stainless Steel, Sterling Silver ★ Pendant size: 33 x 20mm ★ Chain: 18" Sterling Silver --------------------------- ★ FAQs - PLEASE READ BEFORE ORDERING ★ How long will my order take to arrive? The processing time can be found on each listing (this is the time I need to make an item BEFORE shipping). Once shipped: • UK orders are sent 2nd Class and should arrive within 2-3 working days • International orders are sent Tracked and should arrive withing 10-14 working days but can take up to 4 weeks. Shipping may take longer at certain times of year such as Christmas. All international customers will have a tracking number attached to their order details, please check this before messaging for updates on your order. --------------------------- How will my jewellery be packaged? My aim is to be as eco-friendly as possible when it comes to packaging. All jewellery comes gift wrapped in a Kraft box with foam insert. Depending on stock, this will either be a natural Kraft box or black. All orders are then packed in a padded envelope which is letter box sized and can be recycled. --------------------------- How do I look after my jewellery? As a general rule and to keep items looking their best, I recommend removing jewellery before coming into contact with water. In particular, the Moon Phase, Planet and Solar System necklaces are NOT waterproof. Refunds cannot be given for jewellery damaged by water. Metal will naturally tarnish over time, particularly Copper, Brass and Silver. These can be buffed back to new with a microfiber cloth when required. --------------------------- Facebook & Instagram | https://linktr.ee/cometandmoon
Fabriqués avec amour à Aix en Provence, les bijoux Badhnati sont les parfaits grigris d'été. Accumulés autours du cou, entortillés au poignet où à la cheville, on finit par tous les collectionner...
Summer 2020 - Collaboration Collection with Brett p. Stenson
Myriam Balaÿ creates beautiful luxurious and minimalist textile jewelry. Her designs are all handmade in France. She uses cotton, linen and silk to create these colorful pieces. They bring joy to every outfit.
TUTORIAL completo para realizar estos "Pendientes Cometa". Siguiendo nuestro sencillo Video-Tutorial podras crear tus propios pendientes utilizando la técnica Peyote. Además puedes adquirir todo el material necesario para realizarlos en nuestra tienda On-Line. Material utilizado para realizar los pendientes: - Delicas Miyuki 11/0: Yo he utilizado los colores "Gold Plated 24k", y "Nacar White", "Gunmetal" y "Black" - Ganchos para pendiente con trasera - Hilo Fireline carrete -Hilo FireLine por metros - Agujas Medidas del pendiente + el gancho: 5 x 6 cms. aproximadamente. O también podrás comprar el KIT COMPLETO para realizarla. Aquí debajo el tutorial completo para realizar los pendientes:
How about learning how to make an embroidered brooch today? It's not difficult at all! Let me be honest and say that I've been drooling over the embroidered brooches I saw on Pinterest and Instagram for a while now. They really look so pretty! Of course, my mind literally became constipated until I got a clue on how to make one, haha. Now, after a little research and try and fail, let me share this tutorial for you :) The focus in this tutorial is on how to make a brooch out of your embroidered piece so I will not dive into how to stitch the little flower you see here. Although, really, it's nothing too complicated: 3 rows of long and short stitch on each petal and beads for the center. Before proceeding, please, be aware that first try might be a fail like it happens very often. My first attempt of a brooch didn't look pretty (I should have taken a picture, but I forgot). So, I would recommend to give yourself some space for failing the first time, to try it on an excess piece of felt and with embroidery that you won't regret spoiling. Also, it would be great to test the materials before you go serious. Anyway, let's go! Materials and tools: Felt (1mm thick) of the color fitting your embroidery color palette, or contrasting color if you wish, Hot glue gun, Toothpicks (for gluing in complicated places), Brooch pin, Sharp scissors (take both: sewing scissors and manicure scissors. To test their “sharpness” try cutting a piece of felt first). DIY hand embroidered brooch tutorial Work your embroidery for the brooch on a piece of felt that is twice the size of embroidery. It's needed so that you can fold the felt and cut the shape out (Sorry for the ugly looking scissors, they are mirroring their surroundings 😅). When you cut the embroidery out, leave generous allowance around the shape. The two cutouts will be the front and the back of the brooch. Now we need to place and secure the brooch pin on the back of the brooch. Usually, it's better to place the pin between the center and the top of the brooch or it will tilt when wearing. Of course, guessing blindly is not the way to do that so you can go the following route: use a sewing pin to determine the place of the brooch pin from the front, inserting it through both layers. On the backside slide the brooch pin down the shaft of the sewing pin you used. Keep it in place holding with your fingers while removing the sewing pin. Then sew the brooch pin down to the backside. Or you can simply glue it down :) Now, using the hot glue gun, glue the two sides together. You can spread the glue only on one side and stick them together, it will be enough (I spread the glue only on the backside cutout). !Attention! The edges must be glued together especially thoroughly. These kinds of openings like on the left picture are not acceptable! Take a toothpick, coat it in glue and slide between the layers, then press them together. Make sure all of the edges are glued together. It's okay even if glue sticks out, you will cut it out later. Now cut the shape out again. This time the allowance will be 1-2 mm and it will follow the shape of your embroidery closely creating a neat outline. The DIY brooch is ready! The front and the back. It's actually amazing how different it looks depending on the clothing background. By the way, if you don't like the idea of a felt outline, you can work a close buttonhole stitch around the shape. It will further strengthen the sides together and create a neat edge! :) Hope this tutorial inspired you to try and make an embroidered brooch yourself!
Africa is a handmade beaded boho earrings from Mexico. Crafted by Mexican artisans from high quality Japanese beads. Available in different colors.
Handmade Ceramic Trinket Dish. Perfect to house jewellery and other nick nacks. If opting for personalisation, name will be stamped in the centre of the dish. Please select the ‘stamped name’ option and advise of the requested text. I have both uppercase and lowercase stamps so please type in personalisation exactly how you would like the text written. If there are any issues fitting your name I will be in touch to discuss further / organise refund. Please note that this product is made to order. PLEASE ALLOW UP TO 8 WEEKS FOR PRODUCTION BEFORE POSTAGE. All trinket dishes are crafted by hand and once made will sit to dry 1-2 weeks depending on weather. Once dried, the dishes are bisque fired before being glazed and fired again. Due to this lengthy process, orders cannot be rushed. Due to the handmade nature of this product, slight imperfections may be present. No two items are identical and may differ slightly in shape and size. Small cracks often form on the glazed surface due to the characteristics of the glaze used. These may happen immediately or over time.
Two large freshwater pearls with gold bead to centre. All charms are compatible with our Design Your Own Jewellery collections and Multi Charm Necklaces. 18k gold plated stainless steel + freshwater pearls Size: 30 x 12mm Compatible with our Design Your Own Jewellery collection - Interchangeable Compatible with our Multi Charm Necklaces - permanently linked Tarnish and sweat resistant Hypoallergenic no green skin 1 year warranty Price per piece (1)
We interview Rebecca Clarke, the jeweller behind Nook of the North, who creates embroidered jewellery inspired by mid-century design
[…]
The Marin Sweep necklace captures the crisp golden sunlight, orange poppies, coastal waters, and craggy cliffs of Marin County in Northern California. Made from tiny Japanese glass Miyuki Delica beads hand-strung on a very flexible steel cable and finished with a handmade oxidized silver magnetic clasp, it measures 8 feet and can be wrapped and worn at multiple lengths, from a multistrand choker to a minimally-draped statement necklace.
Jeg har været i gang med at sy mine egne runde perlearmbånd, i de fineste sommerlige farver. Jeg har efterhånden set dem en del gange i forskellige butikker, og har længe haft lyst til at prøve at …
Learn how to make a wire wrapped pendant in this DIY wire jewellery craft tutorial by Dee from Oruki Design.
You will need: Preciosa Seed Beads - click here Craft Supplies and Findings - click here
These Monochrome Friendship Bracelets borrow the diamond pattern from our Classic Friendship Bracelets and, quite…
JUNE 2021 - This Collection was Midsommar inspired and included some incredibly special hat pieces from milliner Celina Kane based in Minneapolis, Mn. Sensational florals by wild thyme floral Photos by Rubinski Visual
Apprenez comment réaliser un bracelet bangle en tissage de perles Miyuki delica selon la technique Mississipi
Madison Holler talks to Fast Horse about how her Anishinaable ancestry informs her bead and jewelry work.
