Stainless steel handrail on the concrete stairway. Project Rüthi in Switzerland, designed by Schneider Türtscher Architekten. Photographed by Johanna Muther.
Toolstation: Low Trade Prices on Electrical, Plumbing, Tools, Hardware, Screws & Fixings, Decorating, Workwear and a lot more | FREE next day delivery
Custom post production. Lead times: 4 weeks Aluminum posts and handrail are the perfect solutions for a cable railing project. We produce custom made posts and handrail for your project. The structure of an aluminum railing with stainless steel cable is usually composed of : Aluminum end posts Aluminum intermediate posts (installed at every 4’) Aluminum or wood handrail (we do not supply wood handrail) Stainless steel tensioning system Stainless steel wire rope How to purchase our posts For purchasing predrilled and powder coated aluminum posts and handrails, email us your required quantity with a simple sketch of your project. Please send us the following information: Railing height Number of holes for cable runs Total length of each section (between two end posts) Paint Color (powder coat) Specification of 2'' x 2'' - Side Mounted Aluminum Post 2'' x 2'' (height to be validated by the customer)Aluminum 6061-T6Thickness 0.11''Base plate and plate coverWelded brackets for fixing the handrailPredrilled holes for cable runs and terminals All our standard posts and handrails are painted (powder coat) matte black. For an additional $99,99 CAD, you can pick the color you want. We currently have 10 paint colors to choose from (see our Powder coat color chart). The polyester powder coating used is warranted by GAUTHIERDELAPLANTE for a period of one (1) year against corrosion, rust, tearing, blistering and cracks under certain conditions. NOTE : Screws or anchors to fix the posts to a wood, composite or concrete surface are not included.
Where would you normally use handrail brackets ? To fix a piece of handrail to a wall. What is the bracket made from ? 202 Stainless Steel in a Satin finish. This bracket is for INTERIOR USE ONLY. Please use the 316 Stainless Steel version (IF500XSS) of this bracket if exterior application is required. Do all of the handrails that we sell work with it ? The plate that the handrail is fixed to is flat; so it will work with all of our flat bottom handrails. If you want to use it with one of our fully round handrails, then you will need to purchase the IF502XSC curved plate. How does it fix to the wall ? It uses one centre screw (supplied) to fix into timber or into a plastic plug (supplied) if fixing to brick.
Round Slim Stainless Steel Handrail Wall Bracket is highly different compared to the rest of the bracket collection. Its design offers one solid piece of steel. Perfect for installation of round tubes. It combines the modern look of stainless steel and added structure to your railing with class and versatility. Handrail bracket used for round top rail and grab bars with 1.5 in. Dia - 2 in. Dia 2.5 in. offset from wall to top rail, 2.5 in. height from center hole in wall to bottom of handrail being used 316 marine grade stainless steel can be used as a mounting bracket both inside or outside your home and office brushed stainless; this is a solid stainless material with no other composites or materials Bracket can handle a 200 lbs. load force Using a single hanger bolt that is covered by the flange after finished installation, which is included Mounting hardware included includes: hanger bolt, wall bracket and machine screws for attaching to a steel top rail screws not included for a wood top rail Bracket can be rotated at any angle; it also is adaptable to wood/sheetrock, round/flat steel and glass surfaces Tools needed: tape measure, drill bits, drill, metric allen wrenches, level and corresponding screws for the top rail being used
Description A simple, elegant handrail bracket available for wall or glass mounting applications. The bracket requires approximately 1-1/2” of solid backing or wood stud to anchor into. Made in Canada. Specifications 76 mm (3") X D 76 mm (3") X Ø19 mm (0.75")Mounting hardware included. Product Notes: Flat (no radius): Ideal for flat bottom handrails. Standard distance from the center of the mounting point to the wall is 2 ¾". For custom measurements please contact our sales team. Mounting rose is included and strongly recommended in order to protect the wall surface. For wood installation: fasten threaded stud into wood, thread rod into stud, slide bracket and secure with set screw For installation instructions, please refer to Product Downloads section below Material(s) Made from a base material of stainless steel or brass depending on finish. Satin Stainless Steel Lacquered Satin Brass Unlacquered Satin Brass Lacquered Polished Brass Unlacquered Polished Brass Satin Bronze Satin Stainless Steel Gloss White Matte Black Material Notes: Antique and oxidized finishes are fabricated by hand and result in inconsistent and organic surface textures. Lacquered materials have a protective coating to maintain their shine, while unlacquered materials will naturally age and develop a unique patina over time. For maintenance tips, refer to our care guide. Product Downloads Orla Product Sheet & Installation Instructions
Stainless steel balustrades perform in the harshest of environments whilst adding a modern and contemporary edge.
A unique handrail system designed and made in-house by the fontHOUSE, drawing on our experience of shopfitting and furniture-making for Heal's and House of Fraser. Offering an alternative to the usual round/mopstick profile, this handrail is square in section with gently rounded corners, giving a comfortable grip. Available as satin finished or unfinished/sanded (enabling you to apply your own stain/lacquer, etc., which may be important if you are trying to match existing furniture/fixtures) This continuous Oak rail avoids ugly metal connectors found in some other systems, and uses solid-section timber: no laminated blocks! We offer ready-made lengths to the nearest cm, with finished cuts: - at 90 degrees (square) as standard - or to your own specified angle (please contact for details): 30-45 degrees to the horizontal is the normal range. Lengths under 1.8m are particularly useful for multiple stair turns or dog-leg staircases. The listing includes Stainless Steel or Matt Black Steel brackets (please confirm which option via 'Personalisation' message ) for fixing into brick, stone or concrete , featuring a clean minimalist geometry; the effect is striking! When you order a length of rail, brackets will be included as follows: up to 1.8m rail: 2 brackets 2.4m - 3.0m rail: 3 brackets N.B. 3.0m rail is actually 299cm to enable packaging to comply with courier length limits If you require only the Oak handrail, see separate listing: Search 'Modern Square section SOLID OAK Handrail - long length oak banister - single piece hardwood handrail' MATERIALS Oak 44mm x 44mm square section (60mm corner-to-corner before radiusing), with radiused corners White Oak from FSC-certified sustainable sources Finish Options Unfinished: Fine-sanded to 240 grit, allowing you to finish with oil, varnish, stain, wax oil etc. to suit OR Clear satin finish @ approx. £11.50 per linear metre Brackets Classic stainless elbows, in 14mm solid stainless rod, hand-finished to a brushed satin sheen level or Matt Black Epoxy coated - 7.5cm projection from wall (wall to centre-line of handrail) - single-point fixing wall plate, supplied with high quality Fischer plug and screw-fixing; 2 No. screws for each saddle (the point of contact with handrail) SIZES Handrail lengths up to: 0.9m, 1.2m, 1.8m, 2.4m, 2.7m, 3.0m Send an additional message if you need an exact pre-cut length within the above limits DELIVERY METHODS Free shipping to UK mainland (with exclusions below) Certain outlying areas of Scotland, Devon and Cornwall will have either no service available, or attract a surcharge on the listed prices. Please check with us before you order if there is any doubt - thank you. • FedEx, Tuffnells or DX Next Day services (at this time, it is 1-2 days in practice) • Despatch time: 4 days • Weekday delivery only for handrail; brackets may arrive separately via Royal Mail on Saturdays Do check out the excellent feedback for the fonthouse product range
Stainless steel balustrades perform in the harshest of environments whilst adding a modern and contemporary edge.
Where would you normally use this stainless steel handrail fitting? When needing to create a support post from 50.8mm round stainless tube, this base plate can be glued inside the bottom of the tube (providing it is 1.6mm wall thickness). What is it made out of ? 316 grade Stainless Steel in a Mirror finish. Can it be used for exterior application? As it is 316 grade Stainless Steel, it is more than suitable for use outside. How do you fix it to the stainless steel tube ? By using the t-rex stainless steel glue, or similar. Welding is not necessary. How should you finish it? If you are happy with a Mirror finish, then the product does not need to be touched up in any way. If though you would like a Satin finish, try using our non-woven web pad that will allow you to fairly easily remove the current high polished finish that it has.
A unique handrail system designed and made in-house by the fontHOUSE, drawing on our experience of shopfitting and furniture-making for Heal's and House of Fraser. Offering an alternative to the usual round/mopstick profile, this handrail is square in section with gently rounded corners, giving a comfortable grip. Available as satin finished or unfinished/sanded (enabling you to apply your own stain/lacquer, etc., which may be important if you are trying to match existing furniture/fixtures) This continuous Oak rail avoids ugly metal connectors found in some other systems, and uses solid-section timber: no laminated blocks! We offer ready-made lengths to the nearest cm, with finished cuts: - at 90 degrees (square) as standard - or to your own specified angle (please contact for details): 30-45 degrees to the horizontal is the normal range. Lengths under 1.8m are particularly useful for multiple stair turns or dog-leg staircases. The listing includes Stainless Steel or Matt Black Steel brackets (please confirm which option via 'Personalisation' message ) for fixing into brick, stone or concrete , featuring a clean minimalist geometry; the effect is striking! When you order a length of rail, brackets will be included as follows: up to 1.8m rail: 2 brackets 2.4m - 3.0m rail: 3 brackets N.B. 3.0m rail is actually 299cm to enable packaging to comply with courier length limits If you require only the Oak handrail, see separate listing: Search 'Modern Square section SOLID OAK Handrail - long length oak banister - single piece hardwood handrail' MATERIALS Oak 44mm x 44mm square section (60mm corner-to-corner before radiusing), with radiused corners White Oak from FSC-certified sustainable sources Finish Options Unfinished: Fine-sanded to 240 grit, allowing you to finish with oil, varnish, stain, wax oil etc. to suit OR Clear satin finish @ approx. £11.50 per linear metre Brackets Classic stainless elbows, in 14mm solid stainless rod, hand-finished to a brushed satin sheen level or Matt Black Epoxy coated - 7.5cm projection from wall (wall to centre-line of handrail) - single-point fixing wall plate, supplied with high quality Fischer plug and screw-fixing; 2 No. screws for each saddle (the point of contact with handrail) SIZES Handrail lengths up to: 0.9m, 1.2m, 1.8m, 2.4m, 2.7m, 3.0m Send an additional message if you need an exact pre-cut length within the above limits DELIVERY METHODS Free shipping to UK mainland (with exclusions below) Certain outlying areas of Scotland, Devon and Cornwall will have either no service available, or attract a surcharge on the listed prices. Please check with us before you order if there is any doubt - thank you. • FedEx, Tuffnells or DX Next Day services (at this time, it is 1-2 days in practice) • Despatch time: 4 days • Weekday delivery only for handrail; brackets may arrive separately via Royal Mail on Saturdays Do check out the excellent feedback for the fonthouse product range
Wall mounting flange bracket for 42.4mm or 48.3mm diameter tube and railing, in 304 (interior or 316 (exterior) grade stainless steel.
Cable railings preserve a beautiful view. Whether you have landed the most prestigious construction contract of your career or purchased the home of your dreams; Finding luxury railing ideas for a deck or balcony railing system for a waterfront property is an enviable task to have on your to-do list. Luckily you’ve come to the […]