I used the Stampin’ Up! Hand-Penned Petals stamp set bundle from the upcoming 2021-2022 Annual Catalog (that starts tomorrow!!!) to create a thank you card to share with you today.

This is a blog about the latest Stampin' Up! products with card ideas and stamping and more.

Hi Stampers, Today’s post will be dedicated to a type of die I don’t use often. I call them the INTRICATE DETAIL dies. I have no clue what they are officially called, but to me intricate detail describes them perfectly. The type of die I am talking about is like this one from the PENNED FLOWERS DIES: It is very pretty, and when I use it to die cut the image from cardstock, I like the result, but rarely do I actually do something with the die cut. They tend to be difficult to adhere (there are solutions for this problem), and I sometimes just am at a loss when it comes to incorporating them in a card design. So, today I decided it is time for me to overcome these challenges. I am sharing my results and a few tips. First let’s take a look at the entire set of the PENNED FLOWERS DIES and the coordinating stamp set, HANDED- PENNED PETALS. These items are featured as a bundle and as part of a suite in the STAMPIN’ UP! 2021-2022 ANNUAL CATALOG which goes live one week from today (4 May 2021). PENNED FLOWERS DIES & HAND-PENNED PETALS (HAND-PENNED PETALS BUNDLE) Here are the items I used from this bundle to create today’s cards. (The floral bouquet stamp image, the outline die, and the intricate detail die.) Here are the cards. For this card I used the outline die and the intricate detail die to create pieces for the card’s focal point. SUPPLIES: Card Base - Basic White cardstock 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Blushing Bride) Other Cardstock - Blushing Bride and Basic White Ink - Versa Mark and White Embossing Powder Other Dies - Layering Circle Dies and Stitched So Sweetly Dies Adhesives - Dimensionals and Multi-purpose Glue * The Happy Birthday greeting is from the PANSY PATCH stamp set. Use the Versa Mark to stamp the greeting on Blushing Bride cardstock. Sprinkle the white I die cut the intricate detail image from Basic White cardstock, and used the multipurpose glue to adhere it to the Blushing Bride piece I cut with the outline die. When using multipurpose glue to adhere the intricate detail dies I look for the largest spaces on the die cut and apply the glue in those areas in a very thin line. To avoid too much using too much glue, I squeeze a bit of glue out on my silicone craft sheet or on a scrap of paper. Once the glue has started it is easier to control the amount that comes out as you apply it to the die cut. Die cut a Basic White circle using the largest of the Layering Circle Dies, and from a piece of Blushing Bride cardstock cut a scalloped circle using the largest scalloped die. Adhere the two circle die cuts together. Now adhere the floral piece to the circles. Adhere the DSP to the card base.Use dimensionals to attach the focal point and greeting to the card. This card is similar to the card above, except it does not have the solid die cut image. The intricate detail die is adhered directly to the panel? I used the multipurpose glue for this die cut too. SUPPLIES: Card Base - Garden Green 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Garden Green) Other Cardstock - Basic White 5 1/4” x 4”, Garden Green and Basic White for the focal point Ink - Versa Mark and white embossing powder Other Dies - Stitched So Sweetly Adhesives - multipurpose glue, dimensionals *The greeting is from the SWEET STRAWBERRY stamp set. For the next card I stamped the floral image with Memento Tuxedo Black on Basic White cardstock, colored the image with Stampin’ Blends. I used the intricate detail die cut in Basic Black as an overlay for the floral image. SUPPLIES: Card Base - Basic White 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - Pattern Party - black& white check Other Cardstock - Basic Black 5 1/2” x 3” plus a piece for the die cut & Basic White for the floral image Ink - Memento Tuxedo Black, Stampin’ Blends of your choice for the flower image Other - white crinkled seam binding ribbon -12-14 inches. Adhesives - multipurpose glue and dimensionals * The greeting is from HAND-PENNED PETALS Stamp the greeting with the Tuxedo Black ink toward the lower right corner of the card base. Stamp the floral image on Basic White. Use Stampin’ Blends to color the image. Die cut the image and die cut the intricate detail image. Adhere the Basic Black overlay to the floral image. Adhere the checked DSP to the Basic Black mat. Tie the crinkled seam binding ribbon around the piece on the left side, and tie a bow. Trim the ends. Adhere the piece to the card base along the top of the card. Adhere the floral piece to the card with dimensionals. This card was easy to make. It is just a Basic White intricate detail die cut colored with Stampin’ Blends. SUPPLIES: Card Base - Basic White (thick) 8 1/2” x 5 1/2” scored and folded at 4 1/4” and a piece for the die cut Ink - Soft Succulent and Stampin’ Blends (or Stampin’ Write Markers). Other: In Color Open Weave Ribbon in Soft Succulent - about 18” and Champagne Rhinestones Adhesive: multipurpose glue * The greeting is from the TIMELESS TULIPS stamp set Stamp the greeting toward the bottom center of the card. Adhere the die cut to the card. Place the rhinestones in the centers of the flowers. Tie the ribbon around the card and make a bow. Trim the ends. The card is complete! TIPS FOR ADHERING THE INTRICATE DETAIL DIES 1. Use the method I described above with the multipurpose glue. 2. Multipurpose glue and a sponge. Place the die cut face down on a silicone craft sheet (or a piece of wax paper or parchment paper). Put a dab of the glue on the craft sheet. Dip a wedge of a craft sponge in the glue. Pounce the sponge gentle over the back side of the die cut. * Stampin’ Up! discontinued the Stampin’ Sponges. A sponge dauber can be substituted. After use wash out as much of the glue as possible and let dry. I am not sure how many uses you will get from the sponge dauber. I have used the same dauber twice, and it appears I will get at least one more use from it. 3. Fine Tip Glue Pen - The tip on this glue is made for the intricate dies. The tip can become clogged if the little pin inside the lid is not inserted into the tip of the bottle correctly when putting on the lid. I use it from time to time. 4. Mini Glue Dots - Some of the intricate detail dies have areas where the mini glue dots will fit. Sometimes I cut the glue dots in half, or use the paper piercing tip of the Take Your Pick Tool to roll the glue dot over on itself (sort of fold it in half), and place the glue dot on the die cut. 5. Adhesive Sheets - peel the backing off one side of a section of an adhesive sheet. Place a piece of cardstock the same size as the adhesive sheet over the exposed adhesive. Place the die on top of the cardstock and run it through the Stampin’ Cut & Emboss Machine (or other die cut machine). Peel the adhesive off the back dice of the die cut, and place it on the mat, card base, etc. There are several other die sets in the new catalog that contain the intricate detail dies. One is the Sunflowers Dies which are found in the current Annual Catalog. The Brilliant Wings Dies, which are available now as a special promotion. Here is another look at the cards I created with the intricate detail die from the PENNED FLOWERS DIES: That is it for today. Thank you for stopping by. Until next time... Stamp Happy! Kim Are you looking for a Stampin’ Up! Demonstrator? I would be happy to be your demonstrator. Simply click one of the catalogs found in the right column of this post. This will take you to my Stampin’ Up! Web Site. Click on SHOP, and you will be shopping with me. Or go to stampinup.com, click on shop. You will be prompted to select a demonstrator. You can select a demonstrator by name (Kim Tolbert) or by town / zip code (Vevay, IN). All stamps and stamped images ©️1991-2021 Stampin’ Up!®️

The Hand-Penned Suite of products is definitely a must-have for any card maker! You’ll be reaching for it all year. Hand Penned Petals is extremely versatile. Hand Penned Petals is perfect for...Read More

I have lots of birthdays coming up and today’s card is one of the sweetest birthday cards yet! Paper Pumpkin kits for $5?? Yes, it’s true! Check out today’s blog to subscribe toda…

stampin up, hand penned petals, in-colors 2021-2023

What caught my eye about today's card was the colors. I love the richness of them. And I like the stamped background on the Designer Series ...

I stamped and diecut a bunch of these flowers and was playing with it and decided to use two with a banner inbetween and what a sweet card it made. Basecard is thick white ( I abhor flimsy base so I am exclusively using thick cardstock for the base with a layer of fresh freesia. then a layer of scallops contour diecut in white. Two flowers cut and colored with mango, freesia, balmy blue and granny apple green - popped with dimensional. The sentiment is from Art Gallery pulled a little to fit in the banner from the Floral Heart diecut and pearls to add some sparkle. Easy peasy but SO Pretty!

The Hand-Penned Petals stamp set and coordinating Penned Flowers dies were used to create this feminine get well card.

Hand-Penned Petals from Stampin Up. Created by Teri Pocock. Click through for more details. #teripocock #stampinup #stampinmagic #handpennedpetals

Watercolour techniques don't have to be complicated. They can be for beginners and today's background is perfect for beginners! All you need is a water painter , ink and cardstock perfect for #simplestamping. I was inspired to create the stripped pattern by the reverse of one of the Hand-Penned pattern papers. The simple stripes are easily made using a waterpainter and either ink refils or ink smudged onto an acrylic block or silicon mat. Then just go for it!! They don't have to be perfect!!! Some of mine are thicker than others, some are light some dark but hey it's handmade!! Next I stamped one of the floral images from the Hand-Penned Petals. I coloured it with the water painter and more inks. Stamped a sentiment then used a stitched rectangle die and cut it out. Next I decorated an insert for the inside of my card with a few more watercolour stripes and a watercoloured image. The card came together very quickly and once place on a gorgeous dark green, called Evening Evergreen, coloured card base it was ready for the final embellishments . A small ribbon bow and a few of the gorgeous gems and I was happy.

Stampin' Up! - Happy Stampin' Hand-Penned Petals - Penned Flowers Dies - In Color Share - Stempelen - Jaarcatalogus 2021-2023 - Bloemen

A get well card that should make anyone feel better. I used the new Hand-Penned Petals Bundle to create this beautiful card. The bundle includes the Hand-Penned Petals Stamp Set and the Penned Flowers Dies. This is a two-step stamp set so I stamped the outline flower in Black Memento Ink and stamped the inside flowers in Blushing Bride Ink and the leaves in Crumb Cake Ink. I love the font on the "feel better friend" sentiment which is also included in the Hand-Penned Petals Stamp Set. Details: White Cardstock card base: 4 1/4" x 11", scored at 5 1/2" Blushing Bride 6x6 Designer Series Paper: 5 1/2" x 2", scallop cut using Penned Flowers Dies Accented with Linen Thread and Champagne Rhinestones

Hello and welcome. It is time for another Stamp'n Hop Blog Hop. Our theme this time around is Simple Stamping. It can be so easy to get carried away with all our wonderful products and just keep adding to a project. Next you know, you need to spend hundreds of dollars on product to make one card. That is so silly. I may be guilty of doing that a lot, but in my defence, I am a collector of Stampin' Up!, and have to have it all. So you will be please to know, that I have used just one stamp set on today's card and a sentiment I already had lying on my desk left over from another project. Now that you have seen my creation, it is time to see what Karen has made. You can purchase all the supplies I have used in my online store below, or by using any of my other ordering methods. Product List Hand Penned Petals Photopolymer Stamp Set [155070] $38.00 Tuxedo Black Memento Ink Pad [132708] $10.00 Balmy Blue Classic Stampin' Pad [147105] $13.00 Pear Pizzazz Classic Stampin' Pad [147104] $13.00 Balmy Blue A4 Cardstock [147007] $15.25 Basic White A4 Cardstock [159228] $17.00 Matte Black Dots [154284] $12.25 Multipurpose Liquid Glue [110755] $7.00 Stampin' Dimensionals [104430] $6.00 Add All to Cart Thanks for dropping by. Have a great day. Cheers, Narelle

First I made this floral card with the Hand-Penned Petals Stamps, Dies and Designer Series Paper. Then, I thought putting a vellum front on a card could be fun. Here is the vellum front card open. You have a place to sign, a pretty floral image, and the sentiment INSIDE the card for a very different look. See all the tips and ideas in this 30 minute video: Thanks for hopping by and reading! Receive my weekly customer newsletter: Shop anytime on my Stampin' Up! website: and Earn Bunny Money Rewards! Tempting sale items: Free Tutorials: Join My Team:

Stampin' Up! - Happy Stampin' Hand-Penned Petals - Penned Flowers Dies - In Color Share - Stempelen - Jaarcatalogus 2021-2023 - Bloemen

Hi Stampers, Today’s post will be dedicated to a type of die I don’t use often. I call them the INTRICATE DETAIL dies. I have no clue what they are officially called, but to me intricate detail describes them perfectly. The type of die I am talking about is like this one from the PENNED FLOWERS DIES: It is very pretty, and when I use it to die cut the image from cardstock, I like the result, but rarely do I actually do something with the die cut. They tend to be difficult to adhere (there are solutions for this problem), and I sometimes just am at a loss when it comes to incorporating them in a card design. So, today I decided it is time for me to overcome these challenges. I am sharing my results and a few tips. First let’s take a look at the entire set of the PENNED FLOWERS DIES and the coordinating stamp set, HANDED- PENNED PETALS. These items are featured as a bundle and as part of a suite in the STAMPIN’ UP! 2021-2022 ANNUAL CATALOG which goes live one week from today (4 May 2021). PENNED FLOWERS DIES & HAND-PENNED PETALS (HAND-PENNED PETALS BUNDLE) Here are the items I used from this bundle to create today’s cards. (The floral bouquet stamp image, the outline die, and the intricate detail die.) Here are the cards. For this card I used the outline die and the intricate detail die to create pieces for the card’s focal point. SUPPLIES: Card Base - Basic White cardstock 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Blushing Bride) Other Cardstock - Blushing Bride and Basic White Ink - Versa Mark and White Embossing Powder Other Dies - Layering Circle Dies and Stitched So Sweetly Dies Adhesives - Dimensionals and Multi-purpose Glue * The Happy Birthday greeting is from the PANSY PATCH stamp set. Use the Versa Mark to stamp the greeting on Blushing Bride cardstock. Sprinkle the white I die cut the intricate detail image from Basic White cardstock, and used the multipurpose glue to adhere it to the Blushing Bride piece I cut with the outline die. When using multipurpose glue to adhere the intricate detail dies I look for the largest spaces on the die cut and apply the glue in those areas in a very thin line. To avoid too much using too much glue, I squeeze a bit of glue out on my silicone craft sheet or on a scrap of paper. Once the glue has started it is easier to control the amount that comes out as you apply it to the die cut. Die cut a Basic White circle using the largest of the Layering Circle Dies, and from a piece of Blushing Bride cardstock cut a scalloped circle using the largest scalloped die. Adhere the two circle die cuts together. Now adhere the floral piece to the circles. Adhere the DSP to the card base.Use dimensionals to attach the focal point and greeting to the card. This card is similar to the card above, except it does not have the solid die cut image. The intricate detail die is adhered directly to the panel? I used the multipurpose glue for this die cut too. SUPPLIES: Card Base - Garden Green 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Garden Green) Other Cardstock - Basic White 5 1/4” x 4”, Garden Green and Basic White for the focal point Ink - Versa Mark and white embossing powder Other Dies - Stitched So Sweetly Adhesives - multipurpose glue, dimensionals *The greeting is from the SWEET STRAWBERRY stamp set. For the next card I stamped the floral image with Memento Tuxedo Black on Basic White cardstock, colored the image with Stampin’ Blends. I used the intricate detail die cut in Basic Black as an overlay for the floral image. SUPPLIES: Card Base - Basic White 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - Pattern Party - black& white check Other Cardstock - Basic Black 5 1/2” x 3” plus a piece for the die cut & Basic White for the floral image Ink - Memento Tuxedo Black, Stampin’ Blends of your choice for the flower image Other - white crinkled seam binding ribbon -12-14 inches. Adhesives - multipurpose glue and dimensionals * The greeting is from HAND-PENNED PETALS Stamp the greeting with the Tuxedo Black ink toward the lower right corner of the card base. Stamp the floral image on Basic White. Use Stampin’ Blends to color the image. Die cut the image and die cut the intricate detail image. Adhere the Basic Black overlay to the floral image. Adhere the checked DSP to the Basic Black mat. Tie the crinkled seam binding ribbon around the piece on the left side, and tie a bow. Trim the ends. Adhere the piece to the card base along the top of the card. Adhere the floral piece to the card with dimensionals. This card was easy to make. It is just a Basic White intricate detail die cut colored with Stampin’ Blends. SUPPLIES: Card Base - Basic White (thick) 8 1/2” x 5 1/2” scored and folded at 4 1/4” and a piece for the die cut Ink - Soft Succulent and Stampin’ Blends (or Stampin’ Write Markers). Other: In Color Open Weave Ribbon in Soft Succulent - about 18” and Champagne Rhinestones Adhesive: multipurpose glue * The greeting is from the TIMELESS TULIPS stamp set Stamp the greeting toward the bottom center of the card. Adhere the die cut to the card. Place the rhinestones in the centers of the flowers. Tie the ribbon around the card and make a bow. Trim the ends. The card is complete! TIPS FOR ADHERING THE INTRICATE DETAIL DIES 1. Use the method I described above with the multipurpose glue. 2. Multipurpose glue and a sponge. Place the die cut face down on a silicone craft sheet (or a piece of wax paper or parchment paper). Put a dab of the glue on the craft sheet. Dip a wedge of a craft sponge in the glue. Pounce the sponge gentle over the back side of the die cut. * Stampin’ Up! discontinued the Stampin’ Sponges. A sponge dauber can be substituted. After use wash out as much of the glue as possible and let dry. I am not sure how many uses you will get from the sponge dauber. I have used the same dauber twice, and it appears I will get at least one more use from it. 3. Fine Tip Glue Pen - The tip on this glue is made for the intricate dies. The tip can become clogged if the little pin inside the lid is not inserted into the tip of the bottle correctly when putting on the lid. I use it from time to time. 4. Mini Glue Dots - Some of the intricate detail dies have areas where the mini glue dots will fit. Sometimes I cut the glue dots in half, or use the paper piercing tip of the Take Your Pick Tool to roll the glue dot over on itself (sort of fold it in half), and place the glue dot on the die cut. 5. Adhesive Sheets - peel the backing off one side of a section of an adhesive sheet. Place a piece of cardstock the same size as the adhesive sheet over the exposed adhesive. Place the die on top of the cardstock and run it through the Stampin’ Cut & Emboss Machine (or other die cut machine). Peel the adhesive off the back dice of the die cut, and place it on the mat, card base, etc. There are several other die sets in the new catalog that contain the intricate detail dies. One is the Sunflowers Dies which are found in the current Annual Catalog. The Brilliant Wings Dies, which are available now as a special promotion. Here is another look at the cards I created with the intricate detail die from the PENNED FLOWERS DIES: That is it for today. Thank you for stopping by. Until next time... Stamp Happy! Kim Are you looking for a Stampin’ Up! Demonstrator? I would be happy to be your demonstrator. Simply click one of the catalogs found in the right column of this post. This will take you to my Stampin’ Up! Web Site. Click on SHOP, and you will be shopping with me. Or go to stampinup.com, click on shop. You will be prompted to select a demonstrator. You can select a demonstrator by name (Kim Tolbert) or by town / zip code (Vevay, IN). All stamps and stamped images ©️1991-2021 Stampin’ Up!®️

Welcome to Workshop Wednesday!! Tonight, I created three beautiful project using Stampin' Up's! Hand-Penned Petals Bundle. If you missed the live presentation on my YouTube channel, you can catch the replay below. I created two greeting cards, a birthday card and a thank you card. The images on both cards are water colored with Misty Moonlight and Mint Macaron on Shimmery White card stock. Misty Moonlight is one of the colors that is retiring on May 2, 2022. I think everyone loved the purse. It starts with a 9

Hi everyone, Welcome to my blog today. Thanks so much for popping in to see me. Did you catch my post yesterday as part of the Pootlers New ...

Jo's Stamping Spot - Just Add Ink Challenge #578 - Sketch challenge using Hand-Penned Petals by Stampin' Up! Joanne Stubbings, Campbelltown, NSW,

You can make this Stampin' Up! Beautifully Penned Thanks August 2021 Blog Hop Card with the measurements & supply list included here.

Hi Stampers, Today’s post will be dedicated to a type of die I don’t use often. I call them the INTRICATE DETAIL dies. I have no clue what they are officially called, but to me intricate detail describes them perfectly. The type of die I am talking about is like this one from the PENNED FLOWERS DIES: It is very pretty, and when I use it to die cut the image from cardstock, I like the result, but rarely do I actually do something with the die cut. They tend to be difficult to adhere (there are solutions for this problem), and I sometimes just am at a loss when it comes to incorporating them in a card design. So, today I decided it is time for me to overcome these challenges. I am sharing my results and a few tips. First let’s take a look at the entire set of the PENNED FLOWERS DIES and the coordinating stamp set, HANDED- PENNED PETALS. These items are featured as a bundle and as part of a suite in the STAMPIN’ UP! 2021-2022 ANNUAL CATALOG which goes live one week from today (4 May 2021). PENNED FLOWERS DIES & HAND-PENNED PETALS (HAND-PENNED PETALS BUNDLE) Here are the items I used from this bundle to create today’s cards. (The floral bouquet stamp image, the outline die, and the intricate detail die.) Here are the cards. For this card I used the outline die and the intricate detail die to create pieces for the card’s focal point. SUPPLIES: Card Base - Basic White cardstock 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Blushing Bride) Other Cardstock - Blushing Bride and Basic White Ink - Versa Mark and White Embossing Powder Other Dies - Layering Circle Dies and Stitched So Sweetly Dies Adhesives - Dimensionals and Multi-purpose Glue * The Happy Birthday greeting is from the PANSY PATCH stamp set. Use the Versa Mark to stamp the greeting on Blushing Bride cardstock. Sprinkle the white I die cut the intricate detail image from Basic White cardstock, and used the multipurpose glue to adhere it to the Blushing Bride piece I cut with the outline die. When using multipurpose glue to adhere the intricate detail dies I look for the largest spaces on the die cut and apply the glue in those areas in a very thin line. To avoid too much using too much glue, I squeeze a bit of glue out on my silicone craft sheet or on a scrap of paper. Once the glue has started it is easier to control the amount that comes out as you apply it to the die cut. Die cut a Basic White circle using the largest of the Layering Circle Dies, and from a piece of Blushing Bride cardstock cut a scalloped circle using the largest scalloped die. Adhere the two circle die cuts together. Now adhere the floral piece to the circles. Adhere the DSP to the card base.Use dimensionals to attach the focal point and greeting to the card. This card is similar to the card above, except it does not have the solid die cut image. The intricate detail die is adhered directly to the panel? I used the multipurpose glue for this die cut too. SUPPLIES: Card Base - Garden Green 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Garden Green) Other Cardstock - Basic White 5 1/4” x 4”, Garden Green and Basic White for the focal point Ink - Versa Mark and white embossing powder Other Dies - Stitched So Sweetly Adhesives - multipurpose glue, dimensionals *The greeting is from the SWEET STRAWBERRY stamp set. For the next card I stamped the floral image with Memento Tuxedo Black on Basic White cardstock, colored the image with Stampin’ Blends. I used the intricate detail die cut in Basic Black as an overlay for the floral image. SUPPLIES: Card Base - Basic White 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - Pattern Party - black& white check Other Cardstock - Basic Black 5 1/2” x 3” plus a piece for the die cut & Basic White for the floral image Ink - Memento Tuxedo Black, Stampin’ Blends of your choice for the flower image Other - white crinkled seam binding ribbon -12-14 inches. Adhesives - multipurpose glue and dimensionals * The greeting is from HAND-PENNED PETALS Stamp the greeting with the Tuxedo Black ink toward the lower right corner of the card base. Stamp the floral image on Basic White. Use Stampin’ Blends to color the image. Die cut the image and die cut the intricate detail image. Adhere the Basic Black overlay to the floral image. Adhere the checked DSP to the Basic Black mat. Tie the crinkled seam binding ribbon around the piece on the left side, and tie a bow. Trim the ends. Adhere the piece to the card base along the top of the card. Adhere the floral piece to the card with dimensionals. This card was easy to make. It is just a Basic White intricate detail die cut colored with Stampin’ Blends. SUPPLIES: Card Base - Basic White (thick) 8 1/2” x 5 1/2” scored and folded at 4 1/4” and a piece for the die cut Ink - Soft Succulent and Stampin’ Blends (or Stampin’ Write Markers). Other: In Color Open Weave Ribbon in Soft Succulent - about 18” and Champagne Rhinestones Adhesive: multipurpose glue * The greeting is from the TIMELESS TULIPS stamp set Stamp the greeting toward the bottom center of the card. Adhere the die cut to the card. Place the rhinestones in the centers of the flowers. Tie the ribbon around the card and make a bow. Trim the ends. The card is complete! TIPS FOR ADHERING THE INTRICATE DETAIL DIES 1. Use the method I described above with the multipurpose glue. 2. Multipurpose glue and a sponge. Place the die cut face down on a silicone craft sheet (or a piece of wax paper or parchment paper). Put a dab of the glue on the craft sheet. Dip a wedge of a craft sponge in the glue. Pounce the sponge gentle over the back side of the die cut. * Stampin’ Up! discontinued the Stampin’ Sponges. A sponge dauber can be substituted. After use wash out as much of the glue as possible and let dry. I am not sure how many uses you will get from the sponge dauber. I have used the same dauber twice, and it appears I will get at least one more use from it. 3. Fine Tip Glue Pen - The tip on this glue is made for the intricate dies. The tip can become clogged if the little pin inside the lid is not inserted into the tip of the bottle correctly when putting on the lid. I use it from time to time. 4. Mini Glue Dots - Some of the intricate detail dies have areas where the mini glue dots will fit. Sometimes I cut the glue dots in half, or use the paper piercing tip of the Take Your Pick Tool to roll the glue dot over on itself (sort of fold it in half), and place the glue dot on the die cut. 5. Adhesive Sheets - peel the backing off one side of a section of an adhesive sheet. Place a piece of cardstock the same size as the adhesive sheet over the exposed adhesive. Place the die on top of the cardstock and run it through the Stampin’ Cut & Emboss Machine (or other die cut machine). Peel the adhesive off the back dice of the die cut, and place it on the mat, card base, etc. There are several other die sets in the new catalog that contain the intricate detail dies. One is the Sunflowers Dies which are found in the current Annual Catalog. The Brilliant Wings Dies, which are available now as a special promotion. Here is another look at the cards I created with the intricate detail die from the PENNED FLOWERS DIES: That is it for today. Thank you for stopping by. Until next time... Stamp Happy! Kim Are you looking for a Stampin’ Up! Demonstrator? I would be happy to be your demonstrator. Simply click one of the catalogs found in the right column of this post. This will take you to my Stampin’ Up! Web Site. Click on SHOP, and you will be shopping with me. Or go to stampinup.com, click on shop. You will be prompted to select a demonstrator. You can select a demonstrator by name (Kim Tolbert) or by town / zip code (Vevay, IN). All stamps and stamped images ©️1991-2021 Stampin’ Up!®️

Make a bunch of beautiful monochromatic cards with the Penned Flowers Dies and the new 2021-2023 Stampin' Up! In Colors!

I thought it was Monday almost all day - sorry this is late getting posted! Supplies: • Stamp Sets: Hand-Penned Petals Bundle (155492) • Cardstock: Fresh Freesia (155613), Basic White (159276) • Ink: Fresh Freesia (155611), Memento Black (132708), Fresh Freesia Blends Combo (155518), Daffodil Delight Blends Combo (154883), Soft Succulent Blends Combo (155521) • Tools & Accessories: Stampin' Cut & Emboss Machine (149653), Scalloped Contours Dies (155560), Fresh Freesia Open Weave Ribbon (155615), 2021-2023 In Color Jewels (155571), Tasteful Textile 3D Embossing Folder (152718), Stampin’ Dimensionals (104430), Multipurpose Liquid Glue (110755), Glue Dots (103683), Grid Paper (130148) • Designer Paper: Pansy Petals (155807) Measurements: • Card Base: Fresh Freesia 4 ¼ x 11, score at 5 ½ • Cardstock #2: Fresh Freesia 4 1/8 x 5 3/8 • Cardstock #3: Basic White 3 3/8 x 4 5/8, 2 ¾ x 2 ¾ for flower, scrap for sentiment • Designer Paper #1: Pansy Petals 2 5/8 x 4, 1 ½ x 4 ¼ (To save paper cut a piece 1 ½ x 3 and cut in half. Add from each edge using Grid Paper to make sure you are straight.) Instructions: • Stamp the flower stamp over the 4 1/8 x 5 3/8 piece of Fresh Freesia. Stamp randomly in Fresh Freesia and turn stamp as you go. Run this layer through the Cut & Emboss Machine with the Tasteful Textile 3D Embossing Folder. Add to the card front. • The the strip of Fresh Freesia gingham designer paper across the mid-section of the card front. Use Grid Paper to make sure you are straight. See note above about saving just a little of the DSP. • Cut the Basic White layer with the 2nd largest rectangle in the Scalloped Contours dies. Add to the card with dimensionals. • Cut the other pieces of gingham paper with the 3rd largest of the Scalloped Contours dies. Glue to the center of the white layer. • Stamp the flower cluster with Memento Black ink of the white square. Color using the Fresh Freesia, Soft Succulent, and Daffodil Delight combo of blends. Cut this out with the Penned Flowers dies. Add with dimensionals. • Stamp the sentiment from Hand-Penned Petals in Fresh Freesia on a scrap of white. Fussy cut with snips and add to the card with dimensionals. • Add a bow of Fresh Freesia Open Weave Ribbon to the flower stem with a glue dot. • Add a freesia jewel from the 2021-2023 In Color Jewels. Product List Hand Penned Petals Bundle (English) Basic White 8 1/2" X 11" Cardstock Fresh Freesia 8 1/2" X 11" Cardstock Pansy Petals 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper Tuxedo Black Memento Ink Pad Fresh Freesia Stampin' Blends Combo Pack Soft Succulent Stampin' Blends Combo Pack Daffodil Delight Stampin' Blends Combo Pack Stampin' Cut & Emboss Machine Scalloped Contours Dies Tasteful Textile 3 D Embossing Folder Fresh Freesia 3/8" (1 Cm) Open Weave Ribbon 2021–2023 In Color Jewels Multipurpose Liquid Glue Stampin' Dimensionals Mini Glue Dots Grid Paper Add All to Cart

Today’s tutorial is for a hand-penned blends flower card. This card steps up the Hand-penned Freesia card with some die cutting and gems.

It's Blog Hop time again and this time we have a sketch.

This is a blog about the latest Stampin' Up! products with card ideas and stamping and more.

I need to practice my coloring skills with Stampin’ Blends, so I produced a handful of images from Hand-Penned Petals and got to work. To my delight, this image is a PERFECT image for the pur…

Here is a peek at what I shared last month on social media! Follow me to keep up to date! @stampindolce @stampindolce Created for Stampin' Fancy Friday Created for the Crafty Carrot Collective Created for the Global Design Project in April Shared to Stampin' Dolce Socials Have a creative day!

I'm a Stampin' Up! Demonstrator sharing creative projects and stamping techniques to inspire you in card making, memory keeping, and paper crafting of all kinds.

#handpennedpetals #stampinup #thespotchallenge158

Looking for Stampin' Up! cards and ideas? As an Northern California Independent Stampin' Up! Demonstrator, I love to share share my cards and ideas with other creatives! Join Stampin' Up! or just join us for a Stampin' Up! class soon!

Blushing Bride with Pansy Patch & Hand-penned Petals Hi. Welcome to Valley Inspirations with Andrea and the Art with Heart 2021-2022 Colour Creations Blog Hop. This week's Blog Hop is focussing on another colour starting with "B", that is Blushing Bride. Blushing Bride is a pretty pale pink. It is a lovely colour and is part of the Subtles Colour Family. Blushing Bride is produced in Stampin' Up!'s card-stock, both A4 & 12"x12"; Classic Stampin' inks (ink pads & re-inkers); Stampin' Write Markers; Hand Penned & Subtles Designer Series Papers (DSP) and Hand Penned Memories & More Cards. I loved playing with Blushing Bride so ended up creating 2 cards to share. However, in doing so I am now running short on time to write my blog, so I won't go into as much detail as I usually do. That said, please don't hesitate to contact me if you have any queries. Here are my Blushing Bride projects: Project 1: I started by playing with some water colouring on Fluid 100 paper, using Blushing Bride Classic Stampin' ink and Stampin' Up!'s flat end Water Painter. In the end I cut the piece of water-colour paper into 2 and have used the piece that was pretty well coloured all over. The 2nd piece will be used another time. Once the water-coloured paper was dry, I embossed it with a new set of decorative masks, ie the Plenty of Patterns Decorative Masks and Shimmery Embossing Paste. I usually forget about embossing paste, but I love the effect. I'm thankful to Emma Goddard who used some embossing paste in her Facebook Live this week and reminded me to give it ago. I hadn't used my Pansy Patch bundle and thought it would be great to showcase Blushing Bride, so I die cut pieces of Basic White card-stock using the Pansy dies to form flowers, buds and leaves. I part coloured each piece using Blushing Bride, So Saffron & Soft Sea Foam Classic Stampin' inks and sponge daubers. Must admit, I used a Sponge Dauber for the leaves that had previously been used with a darker green. I tried it on scrap paper and no ink was transferred so I inked it up with Soft Sea Foam, however, the colour that transferred onto the leaves was not a pure Soft Sea Foam green so I applied ink lightly as I didn't have an un-inked dauber to use. The flowers and bud were pieced together using Glue Dots. The water-coloured panel was mounted on a slightly larger piece of Blushing Bride card-stock. Before arranging the pansies, a piece of White Crinkled Seam Binding was wrapped around the card front and tied in a bow. The flowers, bud and leaves were arranged and then adhered with either Multipurpose Liquid Glue or Dimensionals. A sentiment from the Pansy Patch stamp set was stamped in Versamark ink on Blushing Bride card-stock and heat embossed using White Stampin' Emboss Powder and a Heat Gun. A few white Elegant Faceted Gems were added as the finishing touch. A piece of Basic White card-stock that had been pierced with the Stitched Greenery die was adhered to a Thick Basic White card-stock base. I so love the subtle and beautiful effect of this die. The card front was popped up on Dimensionals. The card inner was created by stamping the delightful pansy and leaves in Blushing Bride and Soft Sea Foam. Another sentiment from the Pansy Patch stamp set was stamped in Polished Pink ink to give the sentiment added strength of colour. The card inner was mounted on Blushing Bride card-stock. A Basic White C6 Envelope was also stamped with the delightful little pansy in Blushing Bride ink to link it to the card it will carry. (I love Stampin' Up!s distinctive stamps that give variegated levels of colour with just one step - check out the detail of the pansies on the envelope.) PROJECT 2: After creating the pansy card, I remembered the Stampin' Up!s Designer Series Paper Sale that is on throughout the month of July, with 15% of selected papers. It's a good deal that needs to be highlighted so you don't miss out. This was the impetus for the 2nd project. Even though I was running out of time, I didn't want to miss the opportunity to showcase at least one of the gorgeous Designer Series Papers - especially as the Hand Penned DSP is one of my favs. One of the designs in the Hand-Penned DSP was Blushing Bride and White, so it was perfect for my card. A piece was cut to card front size. Both Basic White and Blushing Bride card-stocks were cut with one of the dies from the Basic Borders dies. Do check them out in the catalogue - they are great. The detailed die from the Penned Flowers dies was used to die cut Basic White card-stock multiple times. The die cuts were then arranged and adhered all over the white panel, giving a subtle, though effective tone on tone effect. White Crinkled Seam Binding was wrapped around the centre and tied in a bow. A floral stamp from the coordinating Hand-Penned Petals stamp set was stamped in Basic Grey ink twice and the flower's infill stamp was used with Blushing Bride ink. Stampin' Blends Combos were used to further colour the flowers and leaves, ie Polishing Pink, So Saffron, Smoky Slate and the Colour Lifter. The flowers alone were coloured on the second image and they were fussy cut and added over the first image to give added dimension. A sentiment from the stamp set was also stamped in Basic Gray ink and fussy cut. Pearl Basic Jewels were added to finish the card front design. The card inner was created with a piece of the same Blushing Bride Hand-penned DSP and a large Scalloped Contours die. A Basic White C6 Envelope was stamped with the same flower, but this time in Blushing Bride ink. It doesn't need a lot of effort to bring coordination. Thank you for visiting Valley Inspirations with Andrea. I had fun playing with some water-colouring, daubering/sponging and infill stamping/Blends colouring featuring Blushing Bride to create these projects to share. If you are in Australia, don't already have a Stampin' Up! demonstrator and would like your own copy of Stampin' Up's 2021-2022 Annual Catalogue then let me know and I will be delighted to send one to you. Please don't hesitate to make contact with any other queries about this project or Stampin' Up!. There is more Blushing Bride creativity. To continue with the blog hop, click on the "next" graphic to be taken to the lovely Diane Furniss' blog. I am looking forward to checking out Diane's creation and everyone else's. If you started part way through or if you missed someone click on the link below to go to Catherine Proctor's blog where she has a list of all the participants in tonight's Colour Creation Blog Hop and their links. Hope to see you next week when we will be featuring Bumblebee; and don't forget the AWH Heart of Christmas Blog Hop launches every Monday evening up to mid-December. Stay well, stay safe and be kind to yourself and others. Andrea 💕🐾 If you find a broken link or have come to this blog hop from a different entry point, you can view the full list of participants on Catherine Proctor’s blog. Check out her amazing creation while you are there. #colourcreationsbloghop

I used the Stampin’ Up! Hand-Penned Petals stamp set bundle and the new 2021-2023 In Colors from the upcoming 2021-2022 Annual Catalog to create a thank you card to share with you today. I d…

Ahhhh isn't this pretty? I think Pale Papaya is my favorite of the five new colors from Stampin' Up! It is not your typical peach, that's for sure, warm and intense without a hint of pink. Look at how amazingly it pairs with two of the other new colors, Evening Evergreen and Soft Succulent. So gorgeous for summer. I did my fourth Facebook live featuring this color yesterday--here it is! Pale Papaya projects all featuring the Hand-Penned suite, which is a real knockout. See what I mean about this buttery color? It really is something special. Can't wait to play...