You are purchasing a single unpainted resin miniature of a Griffon with Paladin Fighter Knight Rider. Available in 28mm, 32mm scale with the base. 28mm scale Size: 70mm (2.76inches) tall 32mm scale Size: 80 (3.15 inches) tall Approximate size measured from bottom to top. This amazing highly detailed figure was designed and sculpted by Archvillain Games. Your figure will be printed in our special blend grey resin. After much experimentation we achieved the highest level of detail, flexibility and hardness. This makes our models far more resistant to drops than other resins, while maintaining all the very fine details. Very thin parts are still vulnerable to break, but less likely thanks to the added flexibility. All miniatures are printed as soon as possible if not already in stock. We take pride in offering great customer support and service. Answering questions and resolving any issues quickly and in a friendly manner. We like to give surprises to delight you in appreciation of your trust in our work and products. This 3d printed miniature is cleaned of supports, and then cured. Your figure will be printed along with a base. Minor assembly and cleaning required . Your figure will not be painted. Please send us photos of your painted miniatures in your reviews, it really makes us happy to see how they come out. PaintedorNot is a licensed retailer of Archvillain Games. We are authorized to sell physical prints of the artist's models. archvillaingames.com
This is a set of resin 3D printed Baby Griffin Riders by Highlands Miniatures. These models are printed in resin and supplied unassembled. Each piece will be checked for any printing defects to ensure you receive the best possible quality product. These models are printed at 32mm scale. If you would prefer 28mm scale, please mention it in the “special instructions to seller” box during check out. These models are supplied without bases, although they do come with the rocky base toppers seen in the renders.. These miniatures are 3D printed, as such small support marks may be visible on the model but these can easily be filled with modelling putty. Most orders are printed in grey resin, but due to availability and stock levels, they may be printed in other colours. This product is made to order, so please allow up to 10 working days for dispatch. Thanks for looking! For orders outside of the UK, the buyer is responsible for any import taxes or customs fees that may apply.
Mechanichal Beast 8to12K : you will receive the bits to be assembled clean and ready to be prymerized and painted (printed base included) perfect for tabletop role play game and Dungeons and dragons The resin may vary color based on availability, gray or green but in any case the print quality remains unchanged all the prints are in 8to12k quality using new latest generation printers, I use two different types of resins according to the availability of the supplier could be standard gray or transparent green, this does not affect the quality of the print at all. note: uv resin prints need supports during production in order to be printed correctly, as a standard I remove the supports myself in post production before shipping, the removal of the supports can sometimes leave small marks this due to the resin . However, I assure you that removing support rarely creates visible damage in case you want to remove the supports yourself, just put a little note about it during the purchase phase Designed and released by https://linktr.ee/castnplay Dimensions : miniatures marked as 32mm are in scale with all tabletop / gaming / dungeon and dragons models, however if you wish a different sizing please contact me and I will create a custom order for you Material : In my workshop high quality resins are used, depending on stock the colour of the resin may change, to improve the painting experience and play session without risk of breakage I will switch to high tenacity resins to prevent unwanted breakage Custom Orders : Whatever you have in mind about a particular miniature let me know, together we will find what you are looking for, here in the dragon fortress there are no limits ( Except those of the printing plate ) My shop in brief : I run it myself , prints , marketing , advertising , everything which is why I ask for your patience from 2-5 days before I can ship , however I am increasing the number of printers to offer you an even better service Licences : All products in my shop are under licence, mine or third parties
🔥🔥🔥𝐌𝐀𝐆𝐍𝐄𝐓𝐈𝐂 𝐁𝐀𝐒𝐄 𝐀𝐍𝐃 𝐀𝐍 𝐈𝐍𝐈𝐓𝐈𝐀𝐓𝐈𝐕𝐄 𝐓𝐑𝐀𝐂𝐊𝐄𝐑 𝐅𝐎𝐑 𝐅𝐑𝐄𝐄🔥🔥🔥 Enhance your gaming experience with this high quality resin 3D printed, magnetic miniature. From Terre Ostili, the perfect miniatures compatible with Dungeons and Dragons (D&D)*, Pathfinder*, Starfinder*, DnD* or any board game or role-playing game. 🚚 𝐅𝐀𝐒𝐓 𝐀𝐍𝐃 𝐓𝐑𝐀𝐂𝐊𝐄𝐃 𝐒𝐇𝐈𝐏𝐏𝐈𝐍𝐆 📐 𝗠𝗶𝗻𝗶𝗮𝘁𝘂𝗿𝗲’𝘀 𝘀𝗶𝘇𝗲 𝗮𝗻𝗱 𝘀𝗰𝗮𝗹𝗲: - 𝐌 (𝐌𝐞𝐝𝐢𝐮𝐦) approx 30-35mm high, suitable for humanoid figure, characters, NPC, elf, orc... (round base of 2,54 cm diameter) - 𝐋 (𝐋𝐚𝐫𝐠𝐞) approx 60-65mm high, suitable for Ogres, Monsters, Large Monsters, Massive Beasts... (round base up to 5 cm diameter) - 𝐇 (𝐇𝐮𝐠𝐞) approx 85-110 high, suitable for Giants, Epic Monsters, Epic Creatures, Dragons, Statues (round base up to 7,6 cm diameter) - 𝐆 (𝐆𝐚𝐫𝐠𝐚𝐧𝐭𝐮𝐚𝐧) approx 115-... high suitable for Colossal Monster, Epic Giants, Ancient Dragons, Massive monsters. (round base up to 10 cm diameter) All miniatures come with a base and with an eco-friendly packaging: WE DON'T USE PLASTIC AT ALL! 💚🌲 𝐒𝐂𝐀𝐋𝐄 & 𝐇𝐄𝐈𝐆𝐇𝐓 𝐌𝐎𝐑𝐄 𝐈𝐍 𝐃𝐄𝐏𝐓𝐇: 30mm scale means that a miniature of a 1.8m human will measure 32mm from feet to eye level. Applying the same scale to a dwarf will result in a miniature that will measure 23mm from feet to eye level because they are only 1.3m tall. On the other hand, an orc, which is usually about 2,1m tall, at this scale will measure 36mm from feet to eye level. 🎨 𝐅𝐎𝐑 𝐏𝐀𝐈𝐍𝐓𝐈𝐍𝐆 𝐏𝐔𝐑𝐏𝐎𝐒𝐄, 𝐖𝐄 𝐑𝐄𝐂𝐎𝐌𝐌𝐄𝐍𝐃 𝐂𝐇𝐎𝐎𝐒𝐈𝐍𝐆 𝐀𝐓 𝐋𝐄𝐀𝐒𝐓 𝐋𝐀𝐑𝐆𝐄 (𝟔𝟎𝐦𝐦) 𝐒𝐂𝐀𝐋𝐄. 🎨 ✉ If you need a different scale or an exact miniature height please contact us and we will happily to sort this out together. ✉ If you'd like your miniature without the base just let me know by message! Base may vary from the one showed in the photo but still it will have a detailed texture. Please visit this page to have a more in-depth look at the sizes available: https://bit.ly/SizeGuideTO -------------------------------------------------------------------------------------------------- Our miniatures are: ✔ MAGNETIC!?: They have a magnetic base that uses a whole series of accessories to reach a new level of game quality. (Magnetic maps, magnetic painting handle, etc..). You are going to role the first magnetic miniatures in EU! ✔ SOLID: Unlike most 3D printed miniatures on the market, we print our models full (not hollowed) for a more solid end product and a better feeling to the touch. ✔ RESISTANT AND TOP QUALITY: they are printed with the best semi-flexible resins on the market for a durable product that lasts over time and emphasizes even the smallest detail. (Please bear in mind that resin is not flexible like plastic. Be gentle with it and try to don't drop the miniature. Magnets are there for this!) ✔ READY TO PLAY: Each model comes an initiative tracker for free to be used out of the box (You can choose the name of the models so please fill up the field above or send us an email at info [!at] terreostili.it). ✔ READY TO PAINT: All the miniatures are meticulously treated by hand and are ready to be painted when they reach your hands. ✏ PAINTING SERVICE If you wish, we will paint your models by hand for an even more immersive and complete gaming experience. Your character or monster will never be the same! 🚀 SHIPMENT The miniatures are shipped only by express courier. The tracking number is always provided. If the model is broken in the post, please provide images and we’ll see what we can do to help. 💖 GIFT BOX We believe that our package represents us as much as the product they contain. We ensure that our packages are going to be perfect for a gift or simply to be displayed on a shelf. You are gonna love them! Awesome model created by the artists that you can find on our website of whom I am a registered merchant. * All trademarks displayed here are the property of their respective copyright holders; third party brands, product names, trade names, corporate names and companies mentioned may be trademarks of their respective owners or registered trademarks of other companies and their legitimate owners and Terre Ostili is not responsible for these.
Welcome to our 3D printing shop! Whether you're a Dungeons and Dragons adventurer, a Pathfinder explorer, a wargaming general, or a Warhammer 40K strategist, our collection is packed with heroes and horrors to bring your epic RPG campaigns to life. Our high-resolution miniatures are printed to the highest standards with premium resin to make every detail pop. We offer a wide-range of sizes to fit your tabletop needs; from the lowly 25mm goblin, and the righteous 32mm paladin, to the titanic tarrasque. So embark on a journey through our Etsy store, delve into our hordes of monsters and characters, and find the models you’re searching for! What to Expect From our Models: Printed using a navy grey blend of two high-quality resins, specifically chosen to improve the definition and flexibility. All models are washed twice; once with alcohol and once with water. This ensures the surface is clean and ready for priming/painting. 3D printing requires the use of supports to properly print models. Similar to spues, these can leave marks on the surface of a model. We use best practices when removing these supports to reduce damage to the model. However, some small nubs or pits may remain that require light sanding to remove. Larger models will often be printed hollow for a number of reasons: to reduce the prevalence of print lines, improve the longevity of our printers, and reduce the risk of printing failures. A hollowed model will still have thick walls and an internal lattice to retain structural integrity. Some of the digital files supplied to us contain a kit for assembly. In most cases, we will ship these as separate parts to better ensure safety during transit. Please note that plastic glue/cement will not work with resin models; for assembly we recommend a general adhesive, such as superglue. Scaling: We use a number of different scaling conventions for our models at the moment. This is primarily due to our use of files from a number of digital artists that use different scaling methods themselves. However, we are working to implement a more generalised system across all of our listings. We have begun to provide scaling images on a large number of our listings. These show the model at a particular scale, with a standard 22mm D20 and ruler for reference. Our different scaling systems are explained below: Base size / Base scale / Scale – This refers to the diameter of the base that the model sits on. If this is the only scale option on a listing then the model you receive will have the same relative size to that base as is shown in the renders provided. Relative ‘Absolute’ Scale (RAS) – This refers to a system in which a 6ft character will be a certain height to the eyes, and all other models with be proportional to the 6ft character. For example, in 32mm RAS a 6ft character will be 32mm tall from the bottom of the foot to the eyes, but dwarves will be shorter than this and trolls will be taller than this, but will all be the correct proportions for that scale. Height – This simply refers to the full height of the model from the bottom to the highest point, and does not refer to the height to the top of the head. Shipping and Processing Time: As a rule, our processing time varies from 1-3 weeks depending on the size of the order, and the availability of printer space. We try to process orders as quickly as possible, and thank you for your patience. If you need a model quickly for a specific event, please get in touch – we can’t guarantee our ability to rush an order, but we’ll always do our best. Domestically (within the UK), our orders are shipped using Royal Mail 2nd class as standard. Internationally, orders are shipped using Royal Mail International Standard – this does not include tracking information. We provide a number of shipping upgrade options, just check the dropdown menu at checkout if you wish to e.g. speed up your delivery or add tracking. We recommend that International customers placing large orders choose a tracked upgrade for increased insurance and peace of mind. Custom Work: We do provide services for custom work. This may involve printing a model at a size that we do not normally provide, or basic 3D modelling work to change a model in some way e.g. adding wings. We do charge an additional fee for this service that varies based on the model and work being done, but we do try to keep this cost competitive and fair. Please contact us directly for any custom work you’d like done. © Rum & Resin Printing holds a license to print and sell designs from Artisan Guild. More of Artisan Guild's brilliant designs can be found at https://www.patreon.com/artisanguild.
The Bralanis are the wildest and most feral of their kind, existing from heartbeat to heartbeat in a glorious, never-ending passion. They resemble short, broad-shouldered, stocky but graceful elves with silvery-white hair and eyes that shift through a rainbow of colors depending on their mood. They can assume the form of a whirlwind. Race: Eladrin Feat: Weapon Proficiency (Martial) Base Attack Bonus: 2 Alignment: Neutral Good, Chaotic Good, or Chaotic Neutral Hit Die: d10 Base Attack Bonus: High
You are purchasing a single unpainted resin miniature of a Griffon with Paladin Fighter Knight Rider. Available in 28mm, 32mm scale with the base. 28mm scale Size: 70mm (2.76inches) tall 32mm scale Size: 80 (3.15 inches) tall Approximate size measured from bottom to top. This amazing highly detailed figure was designed and sculpted by Archvillain Games. Your figure will be printed in our special blend grey resin. After much experimentation we achieved the highest level of detail, flexibility and hardness. This makes our models far more resistant to drops than other resins, while maintaining all the very fine details. Very thin parts are still vulnerable to break, but less likely thanks to the added flexibility. All miniatures are printed as soon as possible if not already in stock. We take pride in offering great customer support and service. Answering questions and resolving any issues quickly and in a friendly manner. We like to give surprises to delight you in appreciation of your trust in our work and products. This 3d printed miniature is cleaned of supports, and then cured. Your figure will be printed along with a base. Minor assembly and cleaning required . Your figure will not be painted. Please send us photos of your painted miniatures in your reviews, it really makes us happy to see how they come out. PaintedorNot is a licensed retailer of Archvillain Games. We are authorized to sell physical prints of the artist's models. archvillaingames.com
Check out this link for a more in depth explaination for the sizes: https://bit.ly/SizeGuideTO 🔥🔥🔥𝐌𝐀𝐆𝐍𝐄𝐓𝐈𝐂 𝐁𝐀𝐒𝐄 𝐀𝐍𝐃 𝐀𝐍 𝐈𝐍𝐈𝐓𝐈𝐀𝐓𝐈𝐕𝐄 𝐓𝐑𝐀𝐂𝐊𝐄𝐑 𝐅𝐎𝐑 𝐅𝐑𝐄𝐄🔥🔥🔥 🔥🔥🔥Read below for the menus' options🔥🔥🔥 Enhance your gaming experience with this Dwarf storm heroine on griffon high quality resin 3D printed, magnetic miniature. From Terre Ostili, the perfect miniatures for Dungeons and Dragons (D&D), Pathfinder, Starfinder, or any board game or role-playing game. 💡Where can i find more information?💡 For more miniatures you can visit our shop at https://bit.ly/terreostili and chat with us whenever you want to! 👀 BEWARE! The size menu refers to the rider! 👀 If you choose an M size miniature you'll get: L size mount, M size rider, If you choose an L size miniature you'll get: H size mount, L size rider, If you choose an H size miniature you'll get: G size mount, H size rider. 🚚 𝐅𝐀𝐒𝐓 𝐀𝐍𝐃 𝐓𝐑𝐀𝐂𝐊𝐄𝐃 𝐒𝐇𝐈𝐏𝐏𝐈𝐍𝐆 📐 𝗠𝗶𝗻𝗶𝗮𝘁𝘂𝗿𝗲’𝘀 𝘀𝗶𝘇𝗲 𝗮𝗻𝗱 𝘀𝗰𝗮𝗹𝗲: - 𝐌 (𝐌𝐞𝐝𝐢𝐮𝐦) approx 30-35mm high, suitable for humanoid figure, characters, NPC, elf, orc... (round base of 2,54 cm diameter) - 𝐋 (𝐋𝐚𝐫𝐠𝐞) approx 60-65mm high, suitable for Ogres, Monsters, Large Monsters, Massive Beasts... (round base up to 5 cm diameter) - 𝐇 (𝐇𝐮𝐠𝐞) approx 85-110 high, suitable for Giants, Epic Monsters, Epic Creatures, Dragons, Statues (round base up to 7,6 cm diameter) - 𝐆 (𝐆𝐚𝐫𝐠𝐚𝐧𝐭𝐮𝐚𝐧) approx 115-... high suitable for Colossal Monster, Epic Giants, Ancient Dragons, Massive monsters. (round base up to 10 cm diameter) All miniatures come with a base! 𝐒𝐂𝐀𝐋𝐄 & 𝐇𝐄𝐈𝐆𝐇𝐓 𝐌𝐎𝐑𝐄 𝐈𝐍 𝐃𝐄𝐏𝐓𝐇: 30mm scale means that a miniature of a 1.8m human will measure 32mm from feet to eye level. Applying the same scale to a dwarf will result in a miniature that will measure 23mm from feet to eye level because they are only 1.3m tall. On the other hand, an orc, which is usually about 2,1m tall, at this scale will measure 36mm from feet to eye level. 🎨 𝐅𝐎𝐑 𝐏𝐀𝐈𝐍𝐓𝐈𝐍𝐆 𝐏𝐔𝐑𝐏𝐎𝐒𝐄, 𝐖𝐄 𝐑𝐄𝐂𝐎𝐌𝐌𝐄𝐍𝐃 𝐂𝐇𝐎𝐎𝐒𝐈𝐍𝐆 𝐀𝐓 𝐋𝐄𝐀𝐒𝐓 𝐋𝐀𝐑𝐆𝐄 (𝟔𝟎𝐦𝐦) 𝐒𝐂𝐀𝐋𝐄. 🎨 👀👀👀 All miniatures and scenery items (like buildings) will be shipped in parts whenever possible to avoid any breakage. Clean cut and easy joint so just a drop of superglue is required. Accessories do not need to be glued. 👀👀👀 Our miniatures are: ✔ MAGNETIC!?: They have a magnetic base that uses a whole series of accessories to reach a new level of game quality. (Magnetic maps, magnetic painting handle, etc..). You are going to role the the first magnetic miniatures in EU! ✔ SOLID: Unlike most 3D printed miniatures on the market, we print our models full (not hollowed) for a more solid end product and a better feeling to the touch. ✔ RESISTANT AND TOP QUALITY: they are printed with the best semi-flexible resins on the market for a durable product that lasts over time and emphasizes even the smallest detail. (Please bear in mind that resin is not flexible like plastic. Be gentle with it and try to don't drop the miniature. Magnets are there for this!) ✔ READY TO PLAY: Each model comes an initiative tracker for free to be used out of the box (You can choose the name of the models so please fill up the field above or send us an email at info [!at] terreostili.it). ✔ READY TO PAINT: All the miniatures are meticulously treated by hand and are ready to be painted when they reach your hands. ✏ PAINTING SERVICE If you wish, we will paint your models by hand for an even more immersive and complete gaming experience. Your character or monster will never be the same! 🚀 SHIPMENT The miniatures are shipped by express courier. The tracking number is always provided. If the model is broken in the post, please provide images and we’ll see what we can do to help. Do you need a faster shipping/crafting? Check in the basket if there is an upgrade available! 💖 GIFT BOX We believe that our package represent us as much as the product they contain. We ensure that our packages are going to be perfect for a gift or simply to be displayed on a shelf. We don't use plastic! You are gonna love them! This company is officially licensed to sell physical prints of the Artisan Guild. Original digital .stl files of this model can be purchased either by joining the Artisan Guild Patreon (at: https://www.patreon.com/ArtisanGuild ),or at MyMiniFactory (at: https://www.myminifactory.com/users/Artisan_Guild )
CLICK FOR SIZE/DIMENSIONS BELOW. Highly detailed, 3d printed resin miniature for table-top gaming, collecting, painting and/or dioramas. Printed in Eco Resin - plant based, and a little more flexible/less brittle than standard resin. This design is available in 28mm or 32mm (Heroic) scales. Miniatures vary in size and are priced accordingly. Assembled dimensions below: 28mm Scale: MOUNT: Height: 135mm Width: 166mm Length: 101mm RIDER - WINGS: Height: 53mm Width: 67mm Length: 76mm RIDER - NO WINGS: Height: 45mm Width: 54mm Length: 40mm 32mm (Heroic) Scale: MOUNT: Height: 150mm Width: 185mm Length: 112mm RIDER - WINGS: Height: 59mm Width: 75mm Length: 85mm RIDER - NO WINGS: Height: 50mm Width: 60mm Length: 45mm Miniatures will be cleaned, supports removed, and cured before sending. Some minimal marks may remain, but should not be visible after painting. Bases are included where shown. Miniatures are sold unpainted - any painted pictures are for reference only. Multi-part miniatures will be sent separately (not assembled) to reduce risk of breakage during shipping. Pieces may require sanding or gap-filling putty for perfect fits - please feel free to reach out for any support required. NOTES ON SCALE/PRICING Tiny: $6 - 20mm base size. E.g. small pet or baby creature Small: $8 - 20mm base size (or undersized on medium base). E.g. gnome, dog Medium: $10 - 25mm base size. E.g. humanoid, most beasts Large: $20 - 50mm base size (or oversized on medium base.) E.g. horse, winged humanoid Extra Large: $35 - 50mm base size (oversized.) E.g. landshark, roper Huge: $50 - 75mm base size. E.g. wyvern, giant, t-rex Gargantuan: $100 - 100mm base size. E.g. adult dragon, Spinosaurus Colossal: $120 - 100mm base size (oversized.) E.g. Tiamat Contact me to discuss any changes such as different scaling. I have a Merchant licence to sell printed files from this designer. Find out more about them and purchase their files at their Patreon: https://www.patreon.com/ArtisanGuild/ or at https://www.myminifactory.com/users/Artisan_Guild.
The role of an artist is to visually depict a subject or scene. Typically this is done by observing and replicating, but artists are given much more creative freedom when working within the realm of fantasy, where we rely on the artist’s impression of a subject’s appearance that doesn’t actually exist in the real world. […]
Over a thousand magic items, settings, and player options for 5e
You are purchasing a single unpainted resin miniature of a Griffon with Paladin Fighter Knight Rider. Available in 28mm, 32mm scale with the base. 28mm scale Size: 70mm (2.76inches) tall 32mm scale Size: 80 (3.15 inches) tall Approximate size measured from bottom to top. This amazing highly detailed figure was designed and sculpted by Archvillain Games. Your figure will be printed in our special blend grey resin. After much experimentation we achieved the highest level of detail, flexibility and hardness. This makes our models far more resistant to drops than other resins, while maintaining all the very fine details. Very thin parts are still vulnerable to break, but less likely thanks to the added flexibility. All miniatures are printed as soon as possible if not already in stock. We take pride in offering great customer support and service. Answering questions and resolving any issues quickly and in a friendly manner. We like to give surprises to delight you in appreciation of your trust in our work and products. This 3d printed miniature is cleaned of supports, and then cured. Your figure will be printed along with a base. Minor assembly and cleaning required . Your figure will not be painted. Please send us photos of your painted miniatures in your reviews, it really makes us happy to see how they come out. PaintedorNot is a licensed retailer of Archvillain Games. We are authorized to sell physical prints of the artist's models. archvillaingames.com
This illustration was created for a children's annual called 'Splendid Stories for Children' published by Blackie and Son Circa 1930's. This picture was drawn by F M or H M Brock (Hard to decipher)
Richard Turpin, better known by his nickname, Dick, was a legendary highwayman who stalked the English countryside. A century or so after his death by hanging in 1739, Turpin was idealised as a dashing rogue or gentleman thief type in a multitude of supposedly factual stories purportedly based on his life. In reality, he was not exactly dashing, with a [...]