Create a cute heart-shaped gift tag with this set of dies! This set is also great for creating fun interactive shaker tags! approximate die sizes in inches: Heart tag: 1.75 x 1 0.875 Heart Frame: 1.75 x 1.625; interior window: 1.375 x 1.25 XOXO word: 0.875 x 0.25
How to Create a Christmas Tag Shaker and introduction to Betty the new Stampin' Cut & Emboss Machine. It is amazing.
Its time for a new theme challenge at SugarPea Designs Yep, We are making Shaker's for this month's Theme Challenge. I made shaker tags using all kinds of SugarPea Designs' Goodies. I cut my tag using SugarCuts Gift Tag, cut out my circle for my shaker using SugarCuts Layered Treat Label, stamped my sentiment that will show through the shaker using Happy Mail and then cut out my hearts for my shaker from SugarCuts Notched Heart Journal card. I also embossed the tags and circle for that nice finishing touch. So I learned the hard way, that you can see the foam tape from the sides of the tag (duh right?). Well, I didn't think about this on my first one and it looked YUCK. So here is how I did my dimensional tape, it leaves a nice finished look. I used half of the hearts that came out of one journal card. Oh and looky looky This stamp set has a "to" and "from" so you can do the back. How cool is that! Supplies Stamps: Happy Mail (SugarPea Designs) Paper: Recollections White 110# (Michaels), Limeade Ice, Summer Sunrise, Aqua Mist, Raspberry Fizz, Harvest Gold (Papertrey Ink) Ink: Versafine Onyx Black Accessories: SugarCuts Gift Tag Die, SugarCuts Layered Treat Labels Die, SugarCuts Notched Heart Journal Card (SugarPea Designs), Scotch Dimensional Tape, Cuttlebug, Acetate, Licorice Divine Twine Technique: Shaker Tags These sweet little shakers are also for Virginia's View Challenge #12 Shaker Cards I know, they aren't CARDS they are TAGS, but they are SHAKERS!!!!!!!! SugarCuts Gift Tag SugarCuts Layered Treat Labels Happy Mail SugarCuts Notched Heart Journal Card Play along with any stamp you like - but if you use SugarPea Designs, we'll top your voucher up to $15! Combine our challenge with any other challenge(s)! Upload to your blog or other online gallery using keyword: SPD13 so that we may check out your beautiful work Add your link to the linkup on the SugarPea Blog. You'll find our current challenges on the sidebar.
Happy Monday all! Kim here with you this morning for Butterfly Reflections Ink featuring the wonderful MFT Otters! I love otters, I keep telling my husband that if we lived in a warmer climate I would want one in the pool all year long! No can do in Montreal... This one will double as a Valentine's Day card for one of my best friends, who loves otters too :) This guy below was my inspiration from a Google search: Look at that dude! Lol For my card I started with a Neena Solar White card base and embossed it with a Tim Holtz/Sizzix embossing folder. I then die cut my frames (Poppy Scribble Trio Frames) out of Kraft and Neena. The Kraft for the actual frame and the Neena to stamp my otters. I Copic coloured my otters and tried to get the same colours as my inspiration photo (E42, E43, E44 and E47 for the body, E30, E31 for the nose surround and R22, R46, R37 and R59 for the heart). I made my own waves using B00, B02 and B04) I then used Tumbled Glass Distress Ink for the sky. I put my frames together and then used Stick It adhesive with craft foam and my red shiny card stock then die cut it with the Avery Elle Simply Said Hugs Elle-ments. I then embossed my "Otter" sentiment from the same MFT Otter set with white embossing powder and cut my black card stock to size. I put the last elements on the card and added some Neat and Tangled sequins from the Peppermint Stick Sequin Mix and I also die cut the hearts from the same foam/shiny paper with Lawn Fawn hearts. Hope you all have a wonderful week! Kim
Give your Christmas gifts a sparkling, handmade touch with the Christmas Shaker Tags set from Crafter’s Companion.This versatile craft kit includes 30 metal dies to create five gift tags in snowflake, stocking, santa and cute snowglobe shapes. Fill with our...
Okay friends, I’m here with another fuse tool/shaker craft. If you missed the DIY Shaker Bookmarks tutorial, click here to check it out – I went more in depth about how to use the tools in that tutorial, so if you aren’t familiar with using a fuse tool, start there. But in this quick tutorial… Continue reading DIY Shaker Tags
Introducing our fun die-cut frame tags with additional small rectangular card included. If you are junk journaler, planner aficionado, or artist; you will love adding these tags to your work. Create shaker tags, specimen tags, or whatever your creative mind leads you to. Then use the additional card for an added bit of artistry, art journaling, or make it into a little tag. So many possibilities. Tag: 3 1/2" x 2 5/16" Card: 1 7/8" x 1 5/16"
Hello and welcome to Mini May 2023 Inspiration and Release week! On May 18 our 4 new stamp sets and coordinating dies along with 6 new standalone die sets, 2 new hot foil sets, and a new stencil will be for sale at your favorite store and at www.lawnfawn.com! Woohoo! Until then we will have funRead more
Shaker Elements by Dress My Craft is a series of small elements to jazz up your shaker cards. They can also be used to add whimsy and fun to greeting cards, gift tags and more. This package contains Dress My Craft Shaker Elements- Sprinkle Party, eight grams. Imported.
You’ve asked for it and here it is! A bee-utiful stamp kit! Say hello to the cute bees of Hive Five! The Hive Five Kit is buzzing with happiness! It comes with Hive Five, a full-size 4×6 stamp set with coordinating dies. There’s also a Honeycomb Shaker Gift Tag die set, Honeycomb Stencil, and aRead more
I have another post for Anna's Craft Cupboard today featuring the fabulous Blueprints 5 - Tag Builder Die-namics by My Favorite Things. There are so many wonderful elements included in this die that I thought I would make a few tags to showcase some of them. This Tag Builder Die-namic includes a solid tag with a stitched edge that you could use on it's own but I have used it for the back of all of these tags. It also includes two other tags. One has a rectangular window with stitching around that (bunny and hippo tag) and the other has a square window with a smaller rectangular opening below it. (house tag) They also have an opening for string or ribbon to go through and two different types of reinforcements for this. One of the greatest things about this tag die, in my opinion, are the different ways you can die-cut your sentiments. You get the fishtail label (bunny), the banner (hippo), the rectangle piece in the square window die (house) and there is a larger fishtail flag too. They only fit smaller sentiments but there are usually a couple of these in most MFT stamp sets. There are many other fun parts to this die too such as little hugs and kisses and hearts. And even the left over parts from "windows" being cut out have stitching around their edges too, so you get lots of useful extras to use on something else :) I decided to try making a shaker tag from the two window tag. I've never made one before and I was really happy with how it turned out :) This is how I made my shaker tag if you'd like to give it a try :) I used the solid tag to cut an acetate piece for the shaker front and a back from white card. I used the tag with the 2 windows to cut a front from purple card. I also used it to cut some foam leaving the lower rectangle window in place. Because the sides of the tag are so tiny I thought I would try this instead of using foam mounting tape. I had never done this before and it was SO much quicker and easier :) I just used the die to cut it and then glued it to the back tag piece. I used the heart confetti die from this set to cut out some hearts in pink and purple and put them inside the shaker window. I glued the acetate sheet on top of the foam piece and then glued the purple piece on top of this. I cut another of the 2 window tags from white card and stamped the "Be Happy" from the MFT Happy Hippos stamp onto the rectangle window piece. I glued this in place over the foam in the bottom window. I stamped the house and heart banner from the MFT Up In The Air set, coloured them with Copics and cut them out. I used glue and glue dots to adhere to tag. The birds from the MFT Happy Hippos set were coloured with Copics, cut out and adhered. I think this might make a nice tag for a new home or housewarming gift or maybe even for a wedding or engagement? Trumpet Bunny Tag Ingredients : Lawn Fawn Watercolor Wishes paper MFT Strike Up The Band (for bunny and sentiment stamp) MFT Up In The Air (cloud stamp) white card On this tag I tried using paper for the top layer rather than cardstock. I used the solid tag die to cut a white cardstock back and the light blue paper from the Watercolor Wishes pad and the rectangle window tag die to cut the dark blue paper from the same pad. It ended up being a lighter tag, but it is still sturdy enough and the papers look beautiful together. Hippo Tag Ingredients : Doodlebug Spring Things Paper MFT Happy Hippos ( for hippo, hat and sentiment) white and pink card I really love the banner die! I have wanted one for a long time, I think they look fantastic. I curved the sentiment stamp slightly and stamped it onto white card and then used the die to cut it out. Then I folded the banner along fold lines and glued them down so that it was fairly flat. You could leave it though if you wanted to and then the banner would have more height. Making these tags has been so much fun!!! They are a great way to use up all those little bits of card and paper you have saved. And they're a great way to use those extra stamps you've coloured and then done nothing with too. When I was making my hippo cards last month I had coloured this hippo and the birds I used on the house tag and cut them out but then decided not to use them. I actually just put them in the plastic sleeve the stamps come in for safe keeping and they were there ready and waiting to be used :) I LOVE the Blueprints 5 Tag Builder Die-namics. It's perfect! I can't wait to make some more for Christmas presents :) Thanks for dropping by today :) Kathy
O que você vai precisar: - folha de papel craft (200 g) - papel decorado - folha de acetato - gabarito de marcação TEC – Viagem I...
Cricut Shaker Gift Tags For Easter (Note: This post may contain affiliate links. I make a small commission on any purchase you make, with no extra cost to you)! Hello Crafters! Let's have some fun today making these cute Easter shaker gift tags! I have been dying to make paper shaker projects, and Easter gift
Beautifully handcrafted eye-catching fun glitter Christmas card with gold shimmer detail and ''Let It Snow" sentiment. This is stunningly contemporary card features a shaker element inside the sentiment. This card is completely handmade and lovingly crafted, each of my cards are unique. This card is blank inside to add you own bespoke message. Card measures 5x7" and an envelope is provided. As a way of a small 'thank you' for supporting my small business each of my cards comes with their very own complementary gift tag and ribbon (ribbon colour may vary). My details are featured on a card inside which can be removed and the tag then reused for your own purposes. The Commitment I believe cards should come from the heart and deserve their own uniqueness to suit the recipient. This card is carefully considered, designed and handmade to provide a one-of-a-kind card. Thanks for your support to keep my crafting joy going and to be able to share it with others. Tee's Cards. TC x
Hello and welcome to Mini May 2023 Inspiration and Release week! On May 18 our 4 new stamp sets and coordinating dies along with 6 new standalone die sets, 2 new hot foil sets, and a new stencil will be for sale at your favorite store and at www.lawnfawn.com! Woohoo! Until then we will have funRead more
Hi there - I hope you're having a fabulous week :) I've been having a fun time playing with the new Lawn Fawn Ice-Cream dies and have created a set of gift tags... As you can see, my tags open up like cards. You can find more photos and step-by-step...
LEARN HOW TO MAKE FUN CHRISTMAS PRESENT SHAKER CARDS ON YOUR CRICUT CUTTING MACHINE Who doesn't love a fun interactive card? Add a little shake and noise and the kids will LOVE it! I wanted
PITTSFIELD -- Walnut arms curve smoothly in a chandalier. A wooden clasp glides apart, and a brown oak box opens to show a row of teabags. Shakers did drink tea. But here with a sewing table and golden-grained wall cabinet stands a computer desk.
Hello and welcome to Lawn Fawn’s Valentine Inspiration & Release Week! On December 12th our 3 new stamp sets, 7 new die sets, a new Reveal Wheel Template and some fun new products will be available at your favorite store and www.lawnfawn.com! Woohoo! Until then we will have fun posts with design team projects, introRead more
I have another post for Anna's Craft Cupboard today featuring the fabulous Blueprints 5 - Tag Builder Die-namics by My Favorite Things. There are so many wonderful elements included in this die that I thought I would make a few tags to showcase some of them. This Tag Builder Die-namic includes a solid tag with a stitched edge that you could use on it's own but I have used it for the back of all of these tags. It also includes two other tags. One has a rectangular window with stitching around that (bunny and hippo tag) and the other has a square window with a smaller rectangular opening below it. (house tag) They also have an opening for string or ribbon to go through and two different types of reinforcements for this. One of the greatest things about this tag die, in my opinion, are the different ways you can die-cut your sentiments. You get the fishtail label (bunny), the banner (hippo), the rectangle piece in the square window die (house) and there is a larger fishtail flag too. They only fit smaller sentiments but there are usually a couple of these in most MFT stamp sets. There are many other fun parts to this die too such as little hugs and kisses and hearts. And even the left over parts from "windows" being cut out have stitching around their edges too, so you get lots of useful extras to use on something else :) I decided to try making a shaker tag from the two window tag. I've never made one before and I was really happy with how it turned out :) This is how I made my shaker tag if you'd like to give it a try :) I used the solid tag to cut an acetate piece for the shaker front and a back from white card. I used the tag with the 2 windows to cut a front from purple card. I also used it to cut some foam leaving the lower rectangle window in place. Because the sides of the tag are so tiny I thought I would try this instead of using foam mounting tape. I had never done this before and it was SO much quicker and easier :) I just used the die to cut it and then glued it to the back tag piece. I used the heart confetti die from this set to cut out some hearts in pink and purple and put them inside the shaker window. I glued the acetate sheet on top of the foam piece and then glued the purple piece on top of this. I cut another of the 2 window tags from white card and stamped the "Be Happy" from the MFT Happy Hippos stamp onto the rectangle window piece. I glued this in place over the foam in the bottom window. I stamped the house and heart banner from the MFT Up In The Air set, coloured them with Copics and cut them out. I used glue and glue dots to adhere to tag. The birds from the MFT Happy Hippos set were coloured with Copics, cut out and adhered. I think this might make a nice tag for a new home or housewarming gift or maybe even for a wedding or engagement? Trumpet Bunny Tag Ingredients : Lawn Fawn Watercolor Wishes paper MFT Strike Up The Band (for bunny and sentiment stamp) MFT Up In The Air (cloud stamp) white card On this tag I tried using paper for the top layer rather than cardstock. I used the solid tag die to cut a white cardstock back and the light blue paper from the Watercolor Wishes pad and the rectangle window tag die to cut the dark blue paper from the same pad. It ended up being a lighter tag, but it is still sturdy enough and the papers look beautiful together. Hippo Tag Ingredients : Doodlebug Spring Things Paper MFT Happy Hippos ( for hippo, hat and sentiment) white and pink card I really love the banner die! I have wanted one for a long time, I think they look fantastic. I curved the sentiment stamp slightly and stamped it onto white card and then used the die to cut it out. Then I folded the banner along fold lines and glued them down so that it was fairly flat. You could leave it though if you wanted to and then the banner would have more height. Making these tags has been so much fun!!! They are a great way to use up all those little bits of card and paper you have saved. And they're a great way to use those extra stamps you've coloured and then done nothing with too. When I was making my hippo cards last month I had coloured this hippo and the birds I used on the house tag and cut them out but then decided not to use them. I actually just put them in the plastic sleeve the stamps come in for safe keeping and they were there ready and waiting to be used :) I LOVE the Blueprints 5 Tag Builder Die-namics. It's perfect! I can't wait to make some more for Christmas presents :) Thanks for dropping by today :) Kathy
Hello and welcome to Mini May 2023 Inspiration and Release week! On May 18 our 4 new stamp sets and coordinating dies along with 6 new standalone die sets, 2 new hot foil sets, and a new stencil will be for sale at your favorite store and at www.lawnfawn.com! Woohoo! Until then we will have funRead more
I received product from Stampin' Up in exchange for this post, but, as always, all opinions are 100% mine. Hey, y'all! Earlier this week...
Bring glittering snow and glowing magic to Christmas craft projects with the Yuletide Iridescent Sequins pack from Crafter’s Companion. Each sequin in this 50g pack has a sparkling, iridescent finish that changes as it catches the light to create a twinkling...