Vertical garden ideas for small spaces! Find 20 beautiful and easy tall planter ideas for vertical gardens to maximize space. Get creative with these inspiring designs!

Poole Outdoor Rattan Footstool Cushion. The ultimate in contemporary chic and outdoor luxury ... a plump, quality outdoor footstool cushion Our Bude outdoor furniture collection is manufactured in an ingenious, eco-friendly, synthetic Water Hyacinth weave which brings luxury and comfort to your garden, patio or outdoor area all year round. To compliment the Bude sofas and armchairs, is a lovely, high comfort footstool with cushion. Bude Outdoor Rattan Footstool Cushion You will be itching to rest your feet on the plump, no-sag cushion that is included in the price of the footstool and which comes in a choice of vibrant colours. All Bude cushions comply with UK fire retardant regulations and the covers are made from quality Olefin fabric which is tough, hard wearing and resistant to water, UV and chemicals, reducing staining. The cushion covers are removable too, making them easy to clean if necessary. But it's not just how good something looks on the outside that counts, and with the Bude range, you can relax and enjoy your furniture, safe in the knowledge that there is quality on the inside too. The footstool frame is made from rust proof aluminium which means the stool is both strong and light weight so you can move it around easily to your choice of location. Finally, to prevent damage to your footstool and to the surface upon which it is placed, the teak wooden feet are finished with varnish and protective plastic caps. The furniture's Aluminium frame and Rattan weave are guaranteed for 3 years and the fabrics have a 2 year guarantee. The Bude furniture collection has the following features Hand-woven, eco-friendly synthetic Water Hyacinth weave that is soft to touch. Sturdy, light-weight and rust free Aluminium frames that are easy to move. Strandlene cross-weaves support the main blanket of Water Hyacinth weave, making it more close-knit and tight fitting around the frame. Raw materials used are 100% recyclable with little or no waste produced in production. Contemporary modern designs that are trendy, ergonomic, luxurious and comfortable. The furniture has varnished, teak wood feet finished with plastic caps to protect the furniture and the surface it's placed on. Very low maintenance. A simple wipe down every now and again will keep them in tip top condition. The Water Hyacinth weave and the Olefin cushion fabric is UV stabilised and use Colour-Fast preservatives as standard ensuring a long working life. All cushions comply with UK Fire Retardant Regulations.

Item specificsCondition

Check out this premium 12x20 pergola retractable canopy from OLT! With our retractable canopy, enjoy extended use regardless of the weather!

An outdoor canopy is a versatile and practical addition to any outdoor space, providing shade and pr

'Furniture is often more important in our lives than architecture,' says the celebrated Japanese architect, as he discusses his long-term collaboration..

Custom accessories for strollers - replacement canopies and seat liners, stroller blankets. You could choose your model and variation of the item in the drop down menu. We are making accessories for Uppababy Vista 2015-2019, V2, Cruz, Minu, Orbit Baby G3. Also we are making only seat liners for Cybex Eezy s+, Aster Didofy. The canopy is made with original patterns and fits perfectly! It is a replacement canopy instead your old original canopy. Outer and inner fabric is waterproof stroller polyester. You could choose in the drop down menu the canopy for Vista or Cruz 2015-2018 with window (Vista or Cruz window/sunshade) or without window. Also the canopy for Vista V2 and Cruz V2 (canopy V2). The seat liner is made with polyester. The seat liner have a small back part that attaches to the seat and prevent it from sliding. In addition, for Uppababy stroller liners the conveniently located Velcro allows you to thread the seat belts through the holes on the seat without undoing them! The seat liner for Vista and Cruz 2015-2019 and for V2 in the drop dow menu marked as Seat liner VistaCruz. Also possible to make the seat liner for Rumble seat. Universal stroller blanket is for all types of strollers (Uppababy Vista, Minu and Cruz as well))). You can use this blanket as: - foot cover or cover of foot muff, - blanket when it is windy or rainy (it has a waterproof impregnation), - blanket in the garden or baby mat. The blanket has ribbons with which you can attach it to the stroller - and it will not slide! An elastic band is sewn into the bottom of the blanket for a snug fit to the stroller. Dimensions of the blanket are approx. 88 cm x 70 cm. Material: spring-summer - waterproof polyester / minky autumn-winter - waterproof polyester / insulating layer / minky. All fabrics we are using are made in EU and have certificate OEKO TEX standard. You could wash it in the machine, steam like polyester. We have a huge choice of solid and printed fabrics. Please ask about other colours and prints! Custom accessories will be ready to ship within 3-4 weeks from your order.

Description of Vintage Rectory Metal Garden Arbour Bench Description Delivery Returns The Vintage Rectory Metal Garden Arbour Bench will make a great addition to your garden. PRODUCT DETAILS H: 185cm x W: 120cm x D: 61.5cm Metal Assembly required This stylish, vintage look bench will add a touch of Victoriana to your garden. With it's stunning canopy it's ideal for climbing plants or fairy lights. A beautiful place to sit with a loved one and enjoy a sunny afternoon or star gazing evening. Expertly made from from robust metal that has been elegantly crafted into stylish curves, this bench is as tough as it is beautiful. Style alone or as part of our Vintage Rectory range. Cushion sold separately. UK Mainland: FREE DELIVERY | Estimated within 2 weeks 14 Day No-Quibble Returns For More Info

Now you know the reason why you should have an evening garden, you should start planning now. The first thing to do is to find out the things which you may need to consider such as the following: F…

Custom accessories for strollers - replacement canopies and seat liners, stroller blankets. You could choose your model and variation of the item in the drop down menu. We are making accessories for Uppababy Vista 2015-2019, V2, Cruz, Minu, Orbit Baby G3. Also we are making only seat liners for Cybex Eezy s+, Aster Didofy. The canopy is made with original patterns and fits perfectly! It is a replacement canopy instead your old original canopy. Outer and inner fabric is waterproof stroller polyester. You could choose in the drop down menu the canopy for Vista or Cruz 2015-2018 with window (Vista or Cruz window/sunshade) or without window. Also the canopy for Vista V2 and Cruz V2 (canopy V2). The seat liner is made with polyester. The seat liner have a small back part that attaches to the seat and prevent it from sliding. In addition, for Uppababy stroller liners the conveniently located Velcro allows you to thread the seat belts through the holes on the seat without undoing them! The seat liner for Vista and Cruz 2015-2019 and for V2 in the drop dow menu marked as Seat liner VistaCruz. Also possible to make the seat liner for Rumble seat. Universal stroller blanket is for all types of strollers (Uppababy Vista, Minu and Cruz as well))). You can use this blanket as: - foot cover or cover of foot muff, - blanket when it is windy or rainy (it has a waterproof impregnation), - blanket in the garden or baby mat. The blanket has ribbons with which you can attach it to the stroller - and it will not slide! An elastic band is sewn into the bottom of the blanket for a snug fit to the stroller. Dimensions of the blanket are approx. 88 cm x 70 cm. Material: spring-summer - waterproof polyester / minky autumn-winter - waterproof polyester / insulating layer / minky. All fabrics we are using are made in EU and have certificate OEKO TEX standard. You could wash it in the machine, steam like polyester. We have a huge choice of solid and printed fabrics. Please ask about other colours and prints! Custom accessories will be ready to ship within 3-4 weeks from your order.

Train a tree for free: How to make a cordon; espalier; fan; stepover and more! This is plant-a-tree season. There's no better time to get those roots down into the soil so they can establish while there's still some warmth in the ground. You can buy mature trees if you wish. But if you can be a little patient it's usually better to plant a young specimen. It will establish quickly - what's more, you can train it to the shape you desire. ‍ These Prunus have been grown as tiny saplings and trained around a wire frame to achieve the desired 'tree people'! Minor grafts were used where necessary and these bonded very quickly onto the young wood. Take fruit trees, for example. There's a range of shapes that can be achieved if the tree is trained when young. The resulting tree will fit into even a small space, allowing people with a tiny garden or courtyard to enjoy fruit-bearing stems. A fan shape is suitable for a wide range of fruit trees and even fruit bushes. Apples, pears, plums, peaches, apricots, nectarines, almonds, cherries, figs, gooseberries and redcurrants can be trained against a wall or fence in a fan shape. Easy to harvest, great to look at - what's not to love? ‍ It's simple to train a young fruit tree. The new shoots just need tying into the most appropriate positions such as a fan. It has a flat back and can sit comfortably against a wall or fence. ‍ You can buy young fruit trees already trained and held into place using a simple frame. This one's a cherry. The ultimate size depends on the type of tree - but also the rootstock. It's always wise to check what rootstock your fruit tree has been grafted onto. Apples have the widest range of rootstocks available (they normally have a prefix of M or MM, plus a number). The smallest rootstocks are M27 but for a fan shaped apple or pear, for example, the most appropriate is M26 (semi-dwarfing, MM106 or MM111. Which shape makes the best use of space? Probably a cordon. What's more, a cordon fruit tree should produce a crop when the tree is still very young - perhaps in the second summer. A cordon tree just needs to have its main stem secured at an angle of around 45 degrees. All its lateral (side) shoots should be pruned to about three buds from the main stem. It is these that will bear fruit. Simple or what? ‍ It's the lateral, or side, shoots on a cordon that will bear the fruit. This is so simple to achieve if you plant a young fruit tree - it is highly suitable for apples and pears. ‍ A double cordon style of pruning, where two stems are trained at 45 degree angles, produces this wonderful diamond shape. A row of pears or apples trained in this way makes a beautiful architectural statement - and it's productive too. Another useful shape is Espalier. This is probably the most common. it has several horizontal tiers which are spaced at around 45cm apart. Many different fruit trees can be grown as an espalier including apples, pears, medlars, even mulberries. ‍ It's easy to train a young tree into an espalier. Create the initial shape during autumn and winter - just select appropriate lateral (side) shoots and train them into at least a 45 degree angle from the main stem. Prune off any stems that don't fit into the desired shape. As the tree gets used to its position, these side shoots can be lowered to horizontal, and secured. As the tree grows in the spring you will need to repeat the process, selecting appropriate lateral shoots until all tiers (typically four) are completed. At this point the leader can be pruned. ‍ These espalier-trained pear trees take up hardly any space. They can be easily trained against a wall or fence and the fruit can be collected with ease. What's more, with some twice-yearly pruning they are easy to maintain and it's simpler to keep pests at bay. So you get beauty; structure and more fruit. If you want to create a low edge to a bed or even a partial partition in the garden, consider a 'step-over' fruit tree. It is really only suitable for apples which have been grafted onto the most dwarfing rootstock (M27). Space your step-over apples at around 1.5m centres. ‍ Need an edge to a bed? A step-over pruned tree is basically a single tier espalier or you might consider it as a horizontal cordon. Just train the lateral shoots out to each side and tie them to a cane at a 45 degree angle. The central stem can be removed during spring or summer. Then lower the side shoots to horizontal and keep the shape by pruning off the laterals. ‍ Want an apple tree that is unobtrusive? A stepover tree can act as a boundary to a bed, a pathway or even a garden division. It's grafted onto the very smallest dwarfing rootstock and can be very successful. Have some fun with trees! There's so much you can do with young trees. Willow in particular is highly suitable for forming into living willow structures, using varieties such as Salix alba var. vitellina; Salix daphnoides; Salix alba var. vitellina 'Britzensis', Salix viminalis and more. Living structures for a garden can be formed to create secret dens; archways; an arbour; a dividing screen; a chair or a little house. The only thing you need to bear in mind is that the plant you use must like being pruned! ‍ There is plenty of fun to be found in training trees! This willow seat (Salix) has been formed by training a young tree against a metal frame. Once the shape has formed, the frame can be taken away. The top of the tree will grow as normal! ‍ Salix, or willow, is one of the easiest of trees to train into shapes. This 'moon hole' makes you want to explore the woods! The young stems of willow are easily bent into shape - but you will need to plant the young whips in late autumn through to early spring so they have a chance to root before the dry weather. ‍ A shady seat for two. Living willow makes a great feature and it's relatively easy to keep its shape by pruning regularly.

.

This parasol’s more classic in looks than some of our other designs, with a teak stem that matches its spokes and a natural canvas canopy. You can use it with any of our garden furniture - in the centre of a table, and it’s especially suited to pairing with rattan and timber.

Cette splendide balancelle de jardin 3 places sera idéale pour vous détendre et faire un break au soleil ou à l'ombre

The Rowlinson Florence Canopy provides you with a perfect shaded place for outdoor entertainment. This contemporary powder-coated aluminium free-standing canopy features four independent roof panels with a weatherproof weave fabric that can be partially opened to create a relaxing shaded space for you to enjoy your garden (detachable pulley tool included).

Custom accessories for strollers - replacement canopies and seat liners, stroller blankets. You could choose your model and variation of the item in the drop down menu. We are making accessories for Uppababy Vista 2015-2019, V2, Cruz, Minu, Orbit Baby G3. Also we are making only seat liners for Cybex Eezy s+, Aster Didofy. The canopy is made with original patterns and fits perfectly! It is a replacement canopy instead your old original canopy. Outer and inner fabric is waterproof stroller polyester. You could choose in the drop down menu the canopy for Vista or Cruz 2015-2018 with window (Vista or Cruz window/sunshade) or without window. Also the canopy for Vista V2 and Cruz V2 (canopy V2). The seat liner is made with polyester. The seat liner have a small back part that attaches to the seat and prevent it from sliding. In addition, for Uppababy stroller liners the conveniently located Velcro allows you to thread the seat belts through the holes on the seat without undoing them! The seat liner for Vista and Cruz 2015-2019 and for V2 in the drop dow menu marked as Seat liner VistaCruz. Also possible to make the seat liner for Rumble seat. Universal stroller blanket is for all types of strollers (Uppababy Vista, Minu and Cruz as well))). You can use this blanket as: - foot cover or cover of foot muff, - blanket when it is windy or rainy (it has a waterproof impregnation), - blanket in the garden or baby mat. The blanket has ribbons with which you can attach it to the stroller - and it will not slide! An elastic band is sewn into the bottom of the blanket for a snug fit to the stroller. Dimensions of the blanket are approx. 88 cm x 70 cm. Material: spring-summer - waterproof polyester / minky autumn-winter - waterproof polyester / insulating layer / minky. All fabrics we are using are made in EU and have certificate OEKO TEX standard. You could wash it in the machine, steam like polyester. We have a huge choice of solid and printed fabrics. Please ask about other colours and prints! Custom accessories will be ready to ship within 3-4 weeks from your order.

This Chilli Seating pergola canopy is exactly what your garden has been missing. Made from powder coated steel for strength and durability for years to come, the lean to pergola frame is crafted into a wide structure which accommodates the polyester canopy top, helping to provide plenty of shelter and protection from UV rays and light rain. Extendable on the front, the canopy can be easily adjusted to provide more or less shelter, allowing you to easily make the most out of the sun and outdoors.