Shop Our Selection of Fine Art Storage Racks New York City, Professionally Built And Installed By Frames And Stretchers. Contact Us Today at 347-705-0081 To Learn More!
The original high pressure laminate by FORMICA Brand Laminate offers a broader range of looks than ever before. Transform spaces with our modern laminates that are as beautiful as they are durable. Mix and match solids, graphic patterns and finishes."}},"base-catalog-202911848":{"__typename":"BaseProduct FORMICA brand laminate is durable, easy to maintain and is stain and impact resistant for long lasting beauty; laminate is often thought of as the kitchen and bath countertop material, but can also be used to make beautiful bar tops, desks, shelving units, backsplashes, cabinet fronts, walls and more Many edging options are available for laminate; try IdealEdge by FORMICA group which are decorative edges in ogee and bullnose profiles that can cover up the distinctive brown seam lines of traditional laminate for a fresh, contemporary look Laminate counters are available with prefinished backsplashes; tops can also be made without prefinished backsplash so you can design your own with tile, stone and even more laminate; the possibilities are endless Part of the beauty of FORMICA brand laminate for countertops is that it's easy to clean and maintain; for simple cleaning, use a nylon-bristled hand or vegetable brush, along with a mild liquid detergent-and-water solution or household cleaner All FORMICA brand laminates come with an industry leading EliteForm surfacing technology, which improves the scratch resistance and durability of laminate Hot cookware can leave permanent burn marks on many countertop surfaces, including laminate; use a trivet, insulated hot pad or other protective device beneath all hot cookware, heat generating appliances or other heated objects Matte is a finish that imparts a warm, pleasing effect that enhances the beauty of color and produces a greater clarity and depth Installing FORMICA brand laminate countertops is easier than you might think, especially with preformed models; if you do not want to do it yourself, a professional installer can always help Image is a representation of the color; view actual sample of the product prior to making your final selection
“As a renter, I’m always on the hunt for reversible and renter-friendly solutions,” this DIYer says. “This, luckily, is a combo of both!”
Shop Our Selection of Fine Art Storage Racks New York City, Professionally Built And Installed By Frames And Stretchers. Contact Us Today at 347-705-0081 To Learn More!
These are handmade Newest Design Black Matte Steel Brackets for sale! Size: 90cm x 34 cm -4 steel frames -no shelves Each Bracket supports any thick shelf, or any thickness you want! They can come in your chosen size and in any color you want! The Shelf Brackets are made to order so please allow two weeks (custom orders - 2 weeks) for making the product and 2-3 weeks for delivery. We can make the brackets in your wanted sizes, design and color! Please inquire us if you have any other questions about it or if you would like to get an custom-made item! :) Steel frames and ceiling-mounted floating shelf brackets are essential components for creating sturdy and stylish floating shelves. Steel frames provide robust support, ensuring the shelf can bear the weight of items placed on it. Ceiling-mounted brackets offer a sleek and minimalist look, as they are concealed and provide the illusion of a floating shelf. When installing these components, it's crucial to consider the weight capacity of the brackets and the material of the shelves themselves. Proper installation is key to ensuring safety and stability. Additionally, the design of the shelves and brackets should complement the overall aesthetic of the room or space where they will be installed. If you have any specific questions about installation or design, feel free to ask!
Uppskattar du bevarade originaldetaljer från sekelskiftet i kombination med stiliga moderna färgval? Låter tanken att vintertid vila ögonen på lågornas sken i kakelugnen som en bra idé? Vill du ha möjlighet att sitta utomhus på en klassisk södergård på sommaren? Om något av ovanstående stämmer och du dessutom tycker att lokalintäkter till föreningen känns som en trygghet? Ja, då föreslår vi att du läser vidare nedan och besöker en av våra visningar.
I will do deals if you buy 4 or more! Just message me and we will work something out! Music lover? Showcase small picture frames, rocks, sentimental items, cameras, etc. on your wall with a record shelf! It's perfect functional wall art. These also can be used as book ends! 😍 Just hang it up with a velcro command strip or two- depending on how much you want the shelf to hold, and fill the shelf with your favorite items! This record shelf is perfect for gift giving, or decorating your own room! I have these all around the house... the bathroom to hold air freshener, the kitchen for functional decor, and my room to place my favorite tiny items on! Notes: • all records are one size: 12” diameter • order does not include command strips • shelves are made from lightly used record albums, so there may be the occasional small imperfection.
Honeycomb shelve backdrop.
sweet home chicago
If you are looking to transform your living room, this post shows you the 23 most stunning ledge ideas. Your living room will look amazing!
Using a sliding door design in your home can help maximise the space while creating the flexibility to change to open concept layout or keep private.
If you follow me on Instagram, this week you may have seen our master bedroom makeover. I transformed our grey (and let’s be honest, drab!) room into a modern minimalist bedroom. To give the room interest and for plenty of styling opportunities, I designed a ledge wall to run behind our bed. Like a built-in ...
Is your garage a mess? Discover clever garage storage ideas that can help declutter your space here!rn
Are you ready to get creative, feel accomplished, and make your home a more lovely space? Check out 15+ wall gallery ideas and more.
Have a long or awkward wall to decorate? Learn how to make DIY Photo Ledges to create a beautiful photo wall. This simple step-by-step tutorial teaches you how to make your own. An easy project that is perfect for beginners. PHOTO LEDGE Just recently, I realized I had never shared this tutorial for How to
Customize these amazing floating shelves to suit any room in your house!
Heb je één of meerdere kasten nodig? Een gesloten of open opbergruimte? Jij mag het bepalen. Met de EKET meubels kan je makkelijk van gedachten veranderen. Door de verstelbare planken kan je de opbergruimte naar wens aanpassen.
5+ months in the making, but I did it! I finally finished this blog post! I’m not going to tell you how much I wanted an office that put off European-esque vibes. I am also not going to give you a lengthy story as to why I decided to tackle this project. Instead, let’s just jump into the tutorial. Because let’s be honest. That’s what you are here for. 😉 But first, before pictures. This is what the office looked like in the listing. This is what the office looked like after we moved in. And this is what the office looked like after a fresh coat of paint. From the first time we looked at the house, I had a vision of what this space would be. Given the fact that I was several months pregnant when we moved in, I knew my vision would have to wait so I settled for a fresh coat of paint until I could bring my complete vision to life. To not lose any of the details I sketched out my vision. I highly recommend doing this. By the time I actually started this project, I had sketched this space out at least 6 times. Looking back, I am glad I had all that extra time to perfect this space because it came out better than I ever had anticipated. My final sketch is shown below. Also, the misshaped books on the sketch is the handy work of our 6 year old. I think he did a great job! Now let’s get into the cost breakdown and supply list. Cost breakdownIKEA Billy Bookcases (4) – $196Wood – $269Paint + primer – $95Paint supplies – $37Appliqués – $26Knobs (pack of 8) – $11Inset hinges – $48Total cost: $682 Materials4 – billy bookcases from IkeaPaint & paint suppliesPrimerPaint of choice (I used Lemon Leaves by Magnolia Home)Angled paint brush4” foam rollers (specifically for cabinets and doors)Blue painters tapeTarpPaint stir sticks If you have a paint sprayer, I recommend using that in place of paint brushes and rollers. However, I didn’t have one at the time (I do now) so I tackled it the old fashioned way. AppliquésRose appliqués above archesRose appliqués on center frame pieces Wood4 – 2 x 4 x 12’3 – 1 x 3 x 8’1 – 1 x 10 x 8’ 2 – 1 x 2 x 8’1 – 1 x 4 x 8’ birch plywood sheet For all frame and visible wood pieces (with the exception of the arches) I used poplar wood. Note, I am not going to give you exact measurements since your space will be different than mine. But I did provide the wood dimensions I purchased/used before cutting them to size. ToolsTape measurePencilLevelSafety gogglesN95 maskImpact driverPhillips drill bitCircular sawJigsawMiter sawOrbital sander80 grit sandpaper (optional)120 grit sandpaper220 grit sandpaper220 grit handheld sand blockLint free clothBrad nailer2” finishing nails1” finishing nailsWood glueWood fillerPutty knifeCaulk gunCaulk Step 1: Remove the baseboards and trim then measure your space. Step 2: Build the base for the bookshelves. I used 2 – 2 x 4 x 12’ for the outside base and 12 – 2 x 4 x 8” planks for the crossbars. I secured the base using 3” exterior deck screws. I also secured the base to the back wall using the same 3” deck screws. I personally like using deck screws as they are easy to work with and I’ve never had to deal with the screws stripping. Tip: I cut the planks to 8” because the outside base pieces were 1 1/2” each which made the frame 11” total in width. That is the same width as the bookshelves. Note, there are a couple of height options. Make sure to get the bookcases that fit your space/look you are going for. Our ceilings are 8’ so we purchased the 79 1/2” ones. That left 16 1/2”, which was plenty of room to add arches. Step 3: Assemble the bookshelves if you have not already. Place them on the frame and determine where you want them to be permanently. Then measure the remaining space. You should really do all the math up front to make sure you buy the right amount of bookshelves for your space. For example, our space in total is 135”. The 4 bookcases are 126” total. That left 9” of space. I couldn’t evenly distribute the bookcases, so I spaced them by 1” on the inside which left 3” on the two ends. Note, I knew I wanted cabinets at the bottom, so I measured the tallest item I planned on storing in the cabinet and based the placement of the shelf nearest to the floor on that. Step 4: Add the backboard insert (that came with the bookshelf) or add your own. Then secure the bookcases to the wall. I used 2 – 2 x 3 x 6’ on each end to create the 3” gap and cut 1” pieces for the center. I had to custom cut the 1” pieces using 1 x 3” scrap wood I had on hand since 1” really means 3/4” when using nominal wood. Tip: Make sure to cut out the outlet holes on the backboards before securing the bookcases to the wall. We had two outlets. I used my jigsaw to cut the holes. If you don’t plan to paint the bookcases or fill in the holes then you can completely skip the next step. Step 5: Determine where you want to put the shelves permanently then fill in the remaining holes. I used light weight spackling paste and a putty knife to fill the holes. After the spackling was dry, I used my orbital sander and 120 grit sandpaper to sand all the bookcases. Sanding the bookcases before priming + painting is critical when using these bookshelves. They are crazy inexpensive because they are made out of particle board with a laminate casing. That means no sanding and priming will result in the paint easily scratching and ultimately peeling off. After sanding everything, I wiped the bookcases clean with a damp lint free cloth. Step 6: Make the arch template. I had to make two templates since the 2 arches on the ends had wider outer frames. Actually, I made 5 total. See below. Tip: I used the cardboard boxes the bookcases came in to create a template. I wasn’t 100% sure what I wanted them to look like. After cutting 4 different styles I ultimately went with the classic arch. I cut the cardboard to the size I needed the actual arch. I tied twine to a pencil, found the bottom center of the cardboard, held my finger down on the twine, traced the arch, then used a box cutter to cut out the arch. There are also tools out there designed to give you the perfect arch. I chose to do it the hard way. 😅 Step 7: Cut the arches out using a jigsaw. I used a new wood blade with 12 TPI. I cut the 4 x 8’ birch plywood sheet into 4 sections with my circular saw first. Then used the arch template to trace onto each of the 4 pieces. Note: You should wear safety goggles to prevent debris getting in your eyes. Step 8: Secure a 2 x 4 to the ceiling directly above the bookcases using 3” exterior deck screws. The 2 x 4 is what you will secure the arches to. You’ll want to use a level to make sure the 2 x 4 is flush with the bookcases. Step 9: Sand the arches using an orbital sander and 220 grit sandpaper. If the area where you cut the arches is a little rough, use 80 grit sandpaper to level it out then 220 to give it a smooth finish. Step 11: Cut the frame pieces. Step 10: Secure the arches to the 2 x 4 and bookcases using a brad nailer with 2” finishing nails. I cut the bottom frame piece first to use as a guide for the vertical trim. I sanded it with 220 grit sandpaper, then secure it before measuring and cutting the remaining frame pieces. I used 1 – 1 x 8 x 12’. There was a small gap at the bottom, so I used 1” half moon trim to hide it. I secured the bottom frame piece where it was level with the bottom shelf of the bookcases for a smooth transition. I then cut the remaining frame pieces. I had to custom cut the 2 outer frame pieces to 3 3/4” wide using 1 – 1 x 10 x 8’. I used my circular saw. I used decorative trim I found at Lowe’s for the ends. This is what the bookcases looked like after adding all the trim. If you are adding cabinet doors you’ll need to cut 1 x 2” pieces to size to secure along the lip of the bottom shelf. Because the shelf sits a little more inside the bookcase I had to use paint stir sticks to ensure the 1 x 2” trim pieces sit flush with the rest of the frame. If you do not plan to add doors, you can skip this step. Step 12: Sand all the frame pieces with 120 grit then 220 grit sandpaper for that ultra smooth finish. I secured the frame to the shelves and base using my brad nailer and 2” finishing nails. Step 13: Add wood filler to all cracks, crevices, and nail holes. Allow the wood filler to dry then sand with 220 grit sandpaper. Step 14: Use caulk to seal the space between the ceiling and frame as well as any visible gaps. Step 15: Prime everything and allow the primer to dry overnight. I cannot stress this step enough. Step 16: Paint the bookcases. I applied two coats of paint total. Allowing the first coat to dry before applying the second coat. I went with Lemon Leaves by Magnolia Home in Eggshell finish. Tip: Lightly sand in between paint coats with a handheld 220 grit sand block for that ultra smooth finish. Step 17: (Optional) Prime, paint, and secure the wood appliqués to the bookcases where desired. To secure them you’ll need wood glue and then a brad nailer with 1” finishing nails. I used THESE appliqués above the arches and THESE appliqués on the center frame pieces. Step 18: Style your new shelves! After waiting for 2+ months we finally got an electrician here to install THIS overhead light. Isn’t it a dream? I filled the shelves with things that I love. Old and new books, candles with character, a portrait of a horse, an original painting of flowers, a photo of my dad, Linnea candles, plants, and moody vases. For those wondering, I built the desk. Tutorial coming soon! For video content and BTS on this project visit my Instagram @acarriedaffairdesigns I saved all my stories to my story highlights titled “Office built-ins” For the tutorial on the DIY shaker style cabinet doors click HERE. I linked some of the items I used to style the shelves below + the chair. And that’s a wrap! For those that have been asking for this tutorial, I am sorry it took me 5 months. Hopefully you find this inspiring to create a space that you love. For more DIY follow me on Instagram @acarriedaffairdesigns Until next time friends. Xo Shop This Post
Take a birch HAMMARP countertop to create a frame. Cut down a MANDAL headboard to the width of your bed, and bam, you have a headboard with a shelf on top.
Manufacturer Schneid Designer Julia Jessen Onda Double is a modular shelving system that elegantly joins form and function. With its rounded metal fixture, it brings a sense of boldness and exalts the beauty of curved lines and soft contours at the same time, bringing an unexpected feminine edge to the material. The shelves are made of oak wood and come in two different sizes. By small milling on the bottom, they can be easily placed on the black lacquered or chrome-coated frame. The small Onda Double shelf is great for low ceilings and pairs perfectly with a picture gallery. The large Onda Double shelf offers remarkable capacity for books, objects, plants, and anything else you care to place in a visible and well-organized way. Dimensions L 63.0" x D 13.4" x H 31.5" L 63.0" x D 13.4" x H 57.1" Materials Metal Oak Estimated lead time 4 weeks Download Datasheet
DIY mid-century modern room divider with cube shelves and do-it-yourself wood frame. How-to, tips & tricks, pictures, shopping list, plan. Bonus: video of the finished project!
✔Indoor climbing frame for children meets the strict quality requirements and is therefore completely safe.All climbing walls are ground so that there are no splinters or burrs. ✔The Mamoi gymnastic wall is made of materials that are child-friendly as well as environmentally friendly. We only use high-quality, certified preparations and natural wood. The children's climbing frame indoor is suitable for indoor assembly - in the children's room or in the playroom. The wooden pull-up bar and the wooden rungs are processed in such a way that they guarantee a good grip during play. ✔The climbing wall for children's rooms is designed for self-assembly. All elements are manufactured with the highest precision so that indoor play equipment can be assembled quickly and easily. The wooden wall bars are designed for children over 36 months old. Children climb indoors on the rungs, pull themselves up and practice other complicated figures - all at home. ✔The wall bars nursery can be used outdoors, but should be stored in a dry and clean place. Due to the natural materials, it must not be exposed to adverse weather conditions such as rain or snow. The manufacturer is not responsible for non-compliance with the storage conditions of the toy instructions. Warnings Use under direct adult supervision. ✔The children's climbing indoor must be assembled and assembled according to the enclosed instructions. Before playing, make sure that the Mamoi product is stable. The wood can be cleaned with gentle agents and a slightly damp cloth. Before playing, make sure that the Mamoi product is stable. The wood can be cleaned with gentle agents and a slightly damp cloth. ✔The rope from our children's ladder for children is very robust but feels comfortable. The product can also be connected to a wall bar. All wooden elements are carefully sanded and therefore completely safe for your child's hands. Ropes are connected with metal clips, which are also - compared to plastic elements - more durable. ✔The swing with gymnastic rings is the only swing that is 100% manufactured in the EU. Therefore, it also meets the strict safety requirements as well as EN and CE STANDARDS. The gymnastic rings trapeze is suitable for children and adults up to 50 kg. The children's gymnastic rings are one of the biggest toys of this kind. Our gymnastic rings have handles whose thickness and size are adapted to children's hands. ✔The indoor baby slide is made of high-quality pine wood and plywood. All parts of the wooden baby slide are connected by means of hammerhead screws. On one side the board is smooth, on the other it has rungs for the child to climb on. Recesses on both sides guarantee that the slide is securely fastened in the chosen place. chosen location.
For a budget and renter friendly solution to add charm to our new home, here is how to make a renter friendly gallery wall with an awesome Ikea hack...
Down in the Valley. Inside Other People's Houses.
My son had a big blank wall that needed some love. I built him 2 shelves for $20 and I LOVE the results. These are so easy to make, and can easily be made in…
Welcome to IKEA. Discover affordable furniture and home furnishing inspiration for all sizes of wallets and homes. Shop online or find a store near you.