Creating a custom shiplap wall doesn't have to be difficult or expensive. Learn how to make your own faux shiplap and plank a wall for $30!

I made it to the finish line of my DIY condo reno. Here is the overview of my renovation of Greg's Condo. Check out my before and afters.

Manestra (better known as kritharaki in Greece) is a Greek dish made with orzo and a delicious meat sauce.

My idea was simply this: What can I do in just 2 days with $200 dollars? I wanted a transformation that wouldn’t consume my life or break the bank. There are lots of budget friendly ideas out there, but some of them are quite labor intensive. I wanted to give our outdated 90’s basic builder […]

Step by step instructions on how to DIY this beautiful and unique slat wall bookshelves in any room of your home.

Get more from Cowbuild on Patreon

Product Description

There are so many different ways that you can create a gallery wall, and depending on what vibe you’re going for, it’ll be a little like putting together a puzzle. Recently, I did a gallery wall in my home office, and really wanted more of an eclectic and less structured feel to it. However, I...Read More

DIY Murphy Bed using a Next Bed Murphy Bed Kit and IKEA PAX wardrobe cabinets. We decided to turn my home office into our new temporary guest room.

Discover the best colors for home office in 2024. From calming neutrals to vibrant hues, transform your workspace with these top paint picks.

Shop Luminance Kathy Ireland Home … and other curated products on LTK, the easiest way to shop everything from your favorite creators.

Here is an approachable Ikea Hemnes Hack to Fluted dresser DIY. Gluing fluted trims to the drawer front gives the dresser a high-end look.

As a designer, poorly hung art is probably my number one design bugbear. Our pictorial guide to hanging art like a pro will help you avoid many all-too-common design pitfalls.

I have been staring at the blank window in my living room for a whole year now. I kept thinking about doing a window valance tutorial and then kept putting it off. I finally decided I wanted

This KonMari Method for Beginners guide introduces Marie Kondo's techniques, and provides simple tips to help you get started and common mistakes to avoid!

Before: Most people put an “updated” kitchen at the top of their home-buying checklist. I on the other hand put it on the bottom. I actually prefer an outdated, awful, disgusting, smelly kitchen because then you can A. rip it out, no regrets, and put in the kind of kitchen you’ve always dreamed of or B. DIY it, and know that it couldn’t possibly get any worse. When we first laid eyes on the kitchen in our home, my family full of contractors begged us to rip it out. They said it was in the wrong spot of the house (which okay, it is. It should be leading into the dining room, but is instead at the back of our home where a laundry room should be), they said the cabinets were disgusting, they said it couldn’t be saved and for a minute I listened. We had lofty [expensive] plans of gutting the kitchen, relocating it, adding in an island and starting from scratch. After a long pep talk from my brother, I felt inspired to attempt to make the kitchen better myself just to see what I could make of it. I read some articles online on how …

The dresser is done! So many of you have been following this project from the beginning on my Instagram stories, and now the wait is over. For those of you who are just joining, it all started with this inspiration… I’ve been noticing this fluted/reeded furniture trend in high-end design for a while and I’m […]

Best trim colors to paint in your home, featuring Benjamin Moore paints. Determine the best trim color to pair with white walls and more.

My media console and nightstand Ikea hacks were definitely my most popular projects of 2020. If you missed it, you can see it here. This year, my plan was to kick off the year with a bedroom refresh as I have shared in my 2021 Project list. I was on the hunt for 2 new nightstands but during an IG poll, most of you wanted to see another Ikea hack. So here it is! I searched Ikea looking for something that I could transform. I came across the Ikea Rast and thought it would be a great nightstand to work on. It is affordable, coming in at $39.99. It is made of solid pine and has 3 drawers, so plenty of storage. You can NEVER go wrong with storage, especially when you live in a smaller home. I didn’t really have a plan for this nightstand. I thought I would figure it out along the way and have you help me determine how this nightstand would look. I did a series of polls in my IG stories and the end result is based on your votes. You all rock! After putting the nightstand together, I knew I didn’t want the toekick at the bottom and wanted to reinforce it with a base under the drawer. I also wanted a top shelf for some books and decorative pieces. To do so, I: 1. Determined where the last drawers ended on the nightstand. I made a mark and then used a speed square to draw a line across the nightstand. 2. I took the nightstand apart so I can measure and cut the side panels. 3. I then accounted for the 1/2″ plywood that I used. I added 1/2″ plus a little and drew a line below my original line (where the drawers ended). 4. Once I determined where I needed to cut, I used my circular saw with a Kreg guide to cut each of the side panels. 5. I then measured the width and depth of the nightstand to determine the base I would need to reinforce the bottom of nightstand. (This should equal the top panel of the nightstand so I measured that to make sure my measurements weren’t off). 6. Using the circular saw plus Kreg guide, I cut the plywood to the determined dimension. I cut 2 pieces of wood, one for the base and one for the shelf. The piece of plywood I used will give you 4 pieces which is perfect for 2 nightstands. 7.Then using my Kreg Pocket hole jig, I added 4 pocket holes to the bottom of each piece of wood that I had cut. 8. I reassembled the nightstand. 9. Using 1/2″ pocket hole screws from my kit, I secured the pieces of wood to the nightstand. One at the bottom, under the last drawer and one right above the second drawer. This now leaves the first drawer empty to be used as a shelf. https://xomyhome.com/wp-content/uploads/2021/01/ikea-trim.mov So that gave me the structure I wanted for the nightstand. Now, I wanted to add some details to the front of the drawer. I had a few options in mind but this vertical board look stole your hearts, so I took a walk around Lowes and decided that lattice trims were the way to go. They are thin, which makes them super easy to work with and also will have little impact, if any, to the profile of the dresser. To create the design: 1. I purchased 4 of these pine lattice trims from Lowes or you can also get 3 of the 10ft lattice trims. This would be enough for one nightstand (2 drawers). 2. I measured the height of each drawer front, then cut the trims to the right length. 3. Using wood glue, I glued the trims to the front of the drawers. I used nickles as my spacer. (One thing I would recommend is laying out all the trims on the drawers with the spacers before applying the glue so you can see how many pieces you need. This also allows you to adjust the spacing to ensure that you have full pieces of the trim for the entire drawer). I missed this step and ended up with a slither in the end. It does’t look bad but would definitely be a cleaner look if I had spaced out the trims a bit better. Another tip I have is to complete one drawer first. Put the drawer back into the nightstand. Apply the first trim to the second drawer and then immediately (before glue dries), put it in the dresser and check to see if it is aligned with the first drawer. Make adjustments if necessary. I think this is an important step as you want to make sure the trims on the two drawers line up. 4. Fill in the drawer holes from the first drawer with wood filler. Let dry and sand smooth. Now let’s prep for paint: 1. I lightly sanded the entire cabinet using 220 Grit sand paper to make sure the unit was smooth to touch. You can do this by hand or with an orbit sander. The higher the number is on the sand paper, the smoother the finish! 2. I wiped down the entire unit with a dry cloth to remove any debris. 3. I applied 2 coats of primer on the entire unit using primer I had from previous projects. Make sure you let the first coat dry completely before applying the second coat. 4. Once the primer was dry, I applied 2 coats of paint. I used Sculptor Clay from @behrpaint. It is the perfect shade of greige. Again, allow each coat to dry before applying the next. 5. Once everything is dry, add legs and hardware. To keep cost minimal, I used legs that I had from previous projects. I had the Hedvig Little 160 in brass from from Pretty Peg. It is a bit tall for this nightstand but I wanted to use what I already had. For hardware, I found a few great options but ended with this one. Here is the total cost breakdown: 1. Cabinet – ~$40 2. Plywood for base and shelf – ~$.8.50 (only used 1/2 for 1 nightstand) 3. Trim for Drawer From – ~$29 4. Primer – $0 from before 5. Paint – $5 (I used very little from the quartz I got) This project cost about $85 plus the cost of hardware and legs you decide to use. Will you give this a try?

Before I had my bedroom closet updated, I thought having a "walk-in" closet was the only way my husband and I could share a closet. Turned out, we just needed a…