DIY Doll Cell Phones and Laptops with FREE Printable - Make your own iPhones and laptops for your 18 inch American Girl or Our Generation doll.
Nativity Set Free Crochet Patterns & Paid
THE LAUNDRY BASKET THAT INSPIRED THIS TUTORIAL In the preceding post, which was dedicated to Janine's Birthday Celebration, I showed this laundry basket that made up part of her birthday gift from me. All the interior items are loose so that Janine could place them where she liked and separate them as needed. However, when putting the basket together, I wanted it to look like a cohesive set. I included a variety of items which you can see in the following post, FRIENDS FOREVER. Sab has asked me what I used to make the towels and so I thought that I should take the opportunity to not only answer that question but also to show how I made them. It is not rocket science but there may be some novice miniaturists that may also be curious and perhaps this is a new technique for the old timers too. (And I mean that in the mini way) hee hee ***** The towels a package of baby washcloths As I told Sab, I have been using baby wash cloths for many years and I think that they provide the most authentic terry cloth for miniature towels that I have seen. But I have also used infant terry Onesies, you know the kind with the feet built in to the pants? They are good too if you are looking for a particular color that is not usually found in washcloths and yet the ones that I have sold the most of in towel sets are WHITE AND PINK. Always. This is a 4 pack of baby wash cloths and I bought them at the dollar store for ONE DOLLAR I emphasize this because that does not often happen anymore The glue I can't say that this has ever been my glue of choice for gluing fabric. It always seems way too wet! My preference would be something I haven't been able to locate for a long time.... VELVERETTE This glue was a whole lot thicker and didn't seem to bleed through the fabric like this one does but this is what I have to use because I haven't found anything better YET (BUT I AM LOOKING) (Well, what was I thinking? White on white!!!!?) (Too late, I'll just have to squint along with you.) Lay out the square of the washcloth and trim away the sewn edge. You want the fabric to fold without the additional bulk. Then you will fold the top down to make the depth of the towel. Mine measure anywhere from an inch and a quarter to an inch and a half. Or 3 cm to 4 cm. It can also depend on if you are storing them in a container like a basket or putting them on a shelf. Make the towels fit the destination. I fold my towels in Real life according to how patient I am at the time so they are not always uniform. So you can see that there is a lot of glue on the fabric. I am chiefly concerned with the edges as that is what will be the ugly parts of this. I am not trying to saturate the towel but I want the edges to stay put. So I glue the shape of the towel, I glue the leading edge and the fold line and the two outside edges and then I fold the top down and press. Then I do the same thing all over again, by running the glue the entire shape of the fabric, forming a glue rectangle. Once again I fold the towel over onto itself. The tail that is extended is cut off just under the folded edge. This is what it looks like on the back side of the towel. Not so pretty but again the importance is to make certain that the edges are glued down securely. Now we fold in the other direction. In order to get the stack, take the edge and fold it in towards the center . Glue under the cut edge and then apply glue to the top of the towel as you see in the photo above. This is what you should have by now. If you looked at the opposite end the towel will also be folded so that both ends are nice to look at. cut and glue down the cut edges Press down with your hand to make sure that the glue is adhering to the cloth, as it will reduce the bulk and also give the towel some "weight" This is what it should look like The stack What do you do with the left over? Make a rolled towel again Same method as above but instead of folding it inward, roll it inward. Use enough glue to secure it as you go. cut and press so that the glue adheres This does not have to be a big roll but make it to suit the space. Then add it to your pile. WASTE NOT, WANT NOT I'm going to use the last little bit up! For this little skinny strip, fold the 2 longest ends in to meet in the middle. First one length and then the other and press down to make the glue grab the fabric. Then starting from one end, fold inward towards the centre so that it looks like the photo above. cut off the tail and do the next one And add it to your pile of folded towels. These are a good size for hand towels and add a little more variety to the collection. The stack of towels Now let's make them special I am adding a little bit of glue to the the underside of the top towel in the stack so that it will remain secure. You do not have to do this but I am making this stack a twosome so they will not be separated. I am using silk ribbon to bind the two towels together visually. If you are going to add a bow, then you can put the glue join on the top surface of the towel but if you are just wanting the plain ribbon, secure the ribbon with glue on the bottom of the stack. (I tried to figure out how to turn this photo around but I can't .) So anyway, wrap the silk ribbon around the towel and cut with some very sharp scissors and then use just a DOT of glue to keep the end down. This glue will bleed through the silk so do not use a lot or you will be mad. OKAY THAT IS IT! ****** And here are some variations on the theme using a variety of different trims to make them more decorative and also adding linen labels. And so we have reached the end of the journey once again. I hope all of you enjoyed folding the towels with me. Now please excuse me while I RELUCTANTLY go and tend to the pile- up in the laundry basket. Not the mini one, the real life one! (sigh) I HATE DOING LAUNDRY! elizabeth
Download this sewing pattern for our sweet little bunny doll, complete with a set of overalls and beanie to keep him snug. The perfect toy / gift for a loved one, you will have fun making it and they will have endless hours of fun playing. The overalls are very easy to put on and off, even for small children. The finished height of the Bunny is 30 cm ( 11 ¹³/₁₆ ") DETAILS: Computer drafted proffessional pattern tutorial and step by step instructions with detailed high quality photos of every step. Both metric and imperial mmnts are included. SKILL LEVEL: The pattern is suitable for those who have a basic knowledge of machine sewing and who are familiar with basic hand stitches. FABRIC RECRUIREMENTS: We used a 100% linen fabric and a washed linen for the overalls. A cotton rib fabric for the beanie. Overalls: approx 25 cm. Beanie 15 cm ribb fabric. YOU WILL NEED: Sewing machine. Scissors. Pinking shears (optional). Fabric. Velcro. Thread (matching with body color). Thread (matching with overalls). Extra strong thread (matching with body color). Hand sewing needle. Toy filling. *After purchasing pattern, you will immediately receive an email from Etsy with the pattern download. You will simply download the pattern and print it off at home on standard letter or A4 size paper. (Detailed instructions on how to print and assembly your pattern are included in the file) TERMS OF USE You may make and sell soft toys in a small scale made from this pattern with a credit to Bon patterns in your listing or descriptions. You may not, however, redistribute this pattern either electronically or in printed form. Please respect my hours of hard work and send your friends and family to my website to purchase their own copy. COPYRIGHT BON PATTERNS LLC. ALL RIGHTS RESERVED
Find the best STEM educational toys in 2021 for kids of all ages this holiday season!
IMPORTANT INFORMATION This is a DIGITAL sewing pattern in a PDF format. The pattern is available for instant download. You can download your file as soon as you complete your purchase. ABOUT THIS PATTERN This bundle of patterns includes step-by-step photo instructions and full-size pattern pieces to make a large Christmas set. The set consists of 24 pieces that can be used for a Christmas Advent calendar or as Christmas stocking fillers. Start your Advent with the bunny and open one new item of clothing every day for a fun count down the days to Christmas! The bundle includes three sewing patterns: Mini bunny doll and holiday outfit, Pajama and winter outfits, Elf and Santa outfits. All clothes and accessories can be mixed and matched to create an endless number of outfits for the bunny! The set includes: 1. Mini bunny doll 2. Sleeveless dress with gathered skirt 3. Detachable felt collar 4. Apron 5. Felt shoes with pom poms 6. Gold crown 7. Flannel overall dress 8. Felt vest 9. Felt jacket with embroidered yoke 10. Felt boots with pom poms 11. Headband with bow 12. Comfortable pajamas 13. Deer sleep mask 14. Warm slippers 15. Felt bear toy 16. Christmas stocking 17. Elf dress with belt and gold buckle 18. Detachable elf collar 19. Elf shoes with curled toes 20. Felt hat with pom pom 21. Santa Claus jacket 22. Santa Claus trousers 23. Santa Claus felt shoes with trim 24. Felt beard with elastic band The bunny easily fits in a pocket and it’s perfect to take along for a walk or for a trip. The doll does not stand without support. SIZE:15.5 cm (6-1/8") SERIES: This doll is part of my MINI doll series. RECOMMENDED FABRICS: - lightweight cotton (quilting cotton) for the bunny, the dress, the apron, the lining of the overall dress, the headband, the pajamas, the slippers, the Christmas stocking, the elf dress, the Santa Claus jacket and trousers; - wool or wool-blend felt for the collars, the shoes and the boots, the vest, the jacket, the sleep mask, the slippers sole, the bear toy, the hat, the beard; - cotton flannel fabric for the outer side of the overall dress. SKILL LEVEL: The pattern is suitable for those who have a basic knowledge of machine sewing and who are familiar with basic hand stitches. LANGUAGE: ENGLISH MEASUREMENTS: in cm and inches ABOUT FILE: The «Mini bunny and holiday outfit» sewing pattern consists of 31 pages, the «Pajama and winter outfits» consists of 31 pages, the «Elf and Santa outfits» consists of 21 pages of instructions in a PDF format. REFUNDS & EXCHANGES Due to the digital nature of this item, it is NON-REFUNDABLE. RIGHTS OF USE Items made using this pattern may be sold in your own shop. Mass production, re-sale and distribution of pattern pieces and instructions is PROHIBITED. YOU MAY ALSO LIKE EXTRA ACCESSORIES THAT FIT THIS DOLL: Easy sleeping basket Sleeping basket Hooded sleeping basket Bed for pet Sleeping bag Camping set Safari tent Baby carrier Bag with window Bag for two dolls Patchwork bag Travel case
Since Bruni is so obviously a classic cardigan girl, not to mention a sweater set girl, lol, I had to figure out how to make a cute, affordable cardigan. There are a lot of sock doll fashion ideas …
Item specificsCondition
For you! Download Owlishly- Sleepy Sarah amigurumi pattern Well, I wanted to thank all you loyal readers and customers by offering a free pattern. I wanted it to be similar to my regular patterns, but also be a tad simpler...
If You'll oder this Doll House now, It 'll be ready to ship for 10 working days! The size of our interactive Doll House is 12x19x4 sm ( 8x12x1 inch) It has 2 Doll girls, dolls clothes and removable food, 3 removable sheets, 6 different pages, removable elements. This Doll House is designed like a handbag , so that it is convenient to take it on the trip. I reduced the size, changed some details to get a mini version of the big Trayler authored by Natalia Kupriyanova. Author of the project - Natalia Kupriyanova @la_dushki_book Author of illustration - Yulia Semitko @julia_se_mi_mi This Fairy Doll House-Bag for Toddlers is full of Interactive and Early Learning Montessori elements witch develop fine motor skills, tactile and sound perception, develop logic and imagination. Suiteble for toddlers of 3+ years old, because contains small parts and removable elements. This Felt Doll House will be the best Birthday's Gift. It contains elements that develop: - two characters, clothes, food - moving elements; - fine motor skills and tactile sensations; - logic and imagination; - lexicon. Our Quiet Book for Toddler will become not only a stylish element of the children’s room, but also an effective early learning tool. Details&Custom - ECO friendly materials are used for this Quiet Book: premium cotton, hypoallergenic feeling, wooden buttons and beads; - size 12x19x4sm/ 4.7x7.5/1.6 inches; - interactive elements; - actual colors may vary a little bit from those shown due to the individual monitor colors settings; - ! despite the fact that all mobile elements are well sewn, DO NOT LEAVE your KID ALONE with a Doll House-Bag. We also have Quiet Books , you can found it here: https://www.etsy.com/shop/smARTmeStore?ref=seller-platform-mcnav Terms&Shipping If your order Doll House-Bag is ready to trip, it will be despatched next working day, and it takes 10-30 days for shipping. If order Quiet Book is custom made, or repeat availability, I need 7-10 working days to make a book on your order. Usually, I’m shipping by air mail, but you can choose EMS for an extra pay. If you need to get it for a certain day, wright to me, I’ll do my best to make it for you in time! Visit for more: https://www.etsy.com/shop/smARTmeStore?ref=seller-platform-mcnav Lana
Este patrón es sencillo y perfecto para quienes buscan retarse un poco más allá de los diseños básicos. 🐧
This is Gunther. He likes unicorns and rainbows, and he would love the chance to spread love into your household. This pattern pack is for the accessories to make Gunther. If you haven’t made a monster yet, be sure to go pick up the monster pattern first. This monster was originally created and designed by Camp Happy Hearts Fibre Arts. (Visit her Facebook page here: https://www.facebook.com/Camphappyheart/ ) However, she knits these adorable monsters, and I wanted to create a crochet pattern for them. So with her permission, I created the first monster based off of one of hers. I then went on and created a few more characters of my own. This pattern is for the monster accessories. IT DOES NOT INCLUDE THE BASE MONSTER PATTERN. You can purchase the pattern for the monster separately, or you can purchase the whole set in my ebook: Monster Mash. In addition to the accessories, with this purchase you will also get the pattern for Eddie the Yeti. This pattern was designed and copyrighted by The Left-Handed Crocheter. You are welcome to make and sell items using my patterns, as long as you don’t post the pattern anywhere. And giving me credit for the pattern is always welcome. Due to this being an electronic product, no refunds will be granted. Be sure to follow me on Facebook for more patterns: https://www.facebook.com/lefthandedcrocheter/
Toy Teapot Free Crochet Patterns
Please note that this is a crochet pattern (PDF file), not the actual toy. The file will be available for download immediately after purchase. This crochet pattern contains a detailed description of how to create Mermaid, Triton, Octopus, Hermit Crab and Seahorse with a great amount of step-by-step photos and a list of necessary materials.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .STORYThe mysterious depths of the ocean keep many secrets, and its inhabitants are the most amazing creatures on our planet. Peace and tranquility reign in the underwater kingdom, ruled by the wise Triton, who is always kind and fair. Only his daughter, a little mermaid, breaks this peace every now and then, coming up with some new entertainment idea for herself and her friends. This time, she has decided to go on a treasure hunt to find the largest pearl in the entire ocean. Her three best friends, the Hermit Crab, the Octopus and the Seahorse, happily accompany her in her quest. After quite a long search, the Hermit Crab finds some treasure!!! No, not a pearl, but a beautiful conch shell overgrown with multi-colored flowers. So stunning! From now on, he will proudly call this shell his home.Kawaii Ocean Minis – the ocean-themed set of toys from the “AradiyaToys Minis” collection. This pattern describes how to create the following four toys: Mermaid, Triton, Octopus, Hermit Crab and Seahorse.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SIZES – Mermaid: 17.5 cm tall (6.7 inches tall)– Triton: 17.5 cm tall (6.7 inches tall)– Octopus: 7 cm tall (2.7 inches tall)– Hermit Crab: 8 cm tall (3.1 inches tall)– Seahorse: 11 cm tall (4.3 inches tall). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MATERIALSMaterials needed to create the toys with the given height:– crochet hook size 2.00 mm (US: B, UK: 14)– yarn: Schachenmayr Catania Originals, 100% cotton, 50g/125m (5 ply):Mermaid: leftover of milky white (105), sand (404), leftover of pale yellow (206), peach (401), leftover of light red (408), pale red (427), purple (422), mint (385), dark mint (253) Triton: milky white (105), sand (404), gold (249), mint (385), dark mint (253)Octopus: milky white (105), pale yellow (206), gold (249), purple (422), dark purple (113), leftover of light red (408)Hermit Crab: milky white (105), leftover of pale yellow (206), peach (401), pale red (427), leftover of purple (422), leftover of mint (385)Seahorse: purple (422), dark purple (113), mint (385), leftover of dark mint (253), leftover of light red (408)– black glass or safety eyes Ø 7 mm (4 pairs)– dark brown and black sewing thread– tapestry needle– stuffing material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LANGUAGESThe pattern is available in English, German, French, Spanish, Portuguese, Danish, Dutch and Italian.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .This pattern is for personal use only. Sharing information from this pattern is prohibited. If you publish the photos of the toys you made with this pattern, crediting the author is always welcome.Photo(s) by Olka Novytska.Thank you for stopping by! Enjoy your stay!
♥ This is an Instant Download pdf Pattern file that you can download and print immediately after purchase ♥ ✩✩✩Springtime Friends pdf Pattern✩✩✩ I created this pattern to celebrate Spring, my favourite time of year! The pattern includes instructions to make an adorable bunny or kitty as well as a couple of different outfits and accessories such as a sweet little summer dress, a cute pair of shorts with buttons and suspenders, a faux fur cape tied in front with a bow and a scarf. The dolls and outfits are made from fabric and are machine sewn. They have hand embroidered facial features and embroidered details that can be customized by your imagination. I have provided lots of photos showing details of the stitches, so you can embellish as much or as little as you'd like. Finished bunnies measure about 14 inches tall, while kitties measure about 11 inches tall. Suitable for sewists with a basic knowledge of hand embroidery and machine sewing. ☛Please note: If you'd like to make one of the tiny baby bunnies shown in the first and second photos, you can find the FREE pattern tutorial on my blog: http://gingermelondolls.blogspot.ca/2017/03/bunny-in-blanket-free-pattern-tutorial.html They'd go so perfectly with a Mum and Dad bunny Pattern includes: ✼ step-by-step, easy to follow instructions and pattern pieces to make the bunny and/or kitty, and all the outfits/accessories ✼ list of supplies you'll need to make them ✼ embroidery stitch guide ✼ lots of photos to help guide you along the way ✼ full scale pattern pieces - no need for re sizing, just print and you're ready to start making your very own doll!! ☛ For more photos and info about these little cuties please pop over to my blog: http://gingermelondolls.blogspot.ca/2017/03/new-pattern-release-springtime-friends.html ♥ You are welcome to sell ready-made Gingermelon items in your own shop. Please offer GINGERMELON design credit in any written description. ♥ Mass production, re-sale and distribution of pattern pieces and instructions is expressly prohibited. Thank you. * Listing is for the instant download pattern only and does not include dolls, supplies or fabric.
Tiny and cute penguin is a great gift for friends and colleagues. Gift with love! The height of the penguin is about 1.57 inches (4 cm). The price is for one penguin. Material: The toys are made of 55% cotton and 45% polyacrylic yarn and stuffed with hypoallergenic fiberfill. The toy is safe for children. Glue is never used for making the toys, all parts are sewn. All toys may be washed only by hands or washing machine (hand wash setting) at 30°C temperature without using a dryer. Just let it dry. The colors of the toys may actually differ slightly from the photos I made in the ad. Was realized in place free from smoking and animals. All items will shipped by registered airmail. For all package I will provide the tracking code. Delivery usually takes about 2-7 weeks. Please make sure your address is correct. If you have any questions, please contact me. Thank you for visiting my shop!
Melonheadz Addict clip art - July 2018 set - Mini - Melonheadz Clipart This set contains all of the images as shown here, COLORED and BLACK AND WHITE included. Each graphic is hand drawn by me, and unique to Melonheadz. ………………………………………………………………………………………………………………………………………………………………… Each image is saved in its own 10 inch png file. Saved at 300 DPI for optimum quality. I have seen them printed as large as 3 feet without losing any of their integrity. This Digital Clipart set includes: 1 zip file ………………………………………………………………………………………………………………………………………………………………… This is a digital product, so no physical item will be provided. ………………………………………………………………………………………………………………………………………………………………… Here’s the link to my Terms of Use, please take the time to read it, as you will be agreeing to the terms upon purchase. Melonheadz Terms of Use Reselling, copying, or sharing my work is not permitted. Blog and Website design is not permitted, as I am under contract with such a company. ………………………………………………………………………………………………………………………………………………………………… All images © Melonheadz Illustrating LLC 2012 – All rights reserved. Thank you for visiting my shop <3 Xox Nikki
Une dînette au crochet, quoi de plus adorable comme projet ? Découvrez ma première dînette et le projet fou qu'elle a engendré !
Mini jumpers hand knitted and with a ribbon loop for hanging on your Christmas tree. These fun little jumpers are approx 10cms. The set has the following deigns: Santa, Elf, Christmas Tree, Red with Snowflake Green with fair isle Mini jumpers hand knitted and with a ribbon loop for hanging on your Christmas tree. These fun little jumpers are approx 10cms. The set has the following d...More
Plastic bowling sets? Too noisy! Soft crocheted bowling sets? Blissfully quiet! And the bowling ball has functioning finger holes! Makes a GREAT gift for a child in a family who hates noisy toys. Includes pattern for both small and normal sized pins! Bowling ball = 5” tall Small pin = 6 1/8” tall Regular pin = 7 3/4” tall
There have been a few rainy days recently that have just made me want to cuddle up with a cozy afghan and pull out a hook and some yarn and crochet! I love a craft I can cozy up to! Crochet is the perfect craft to do while looking out a rainy window and make
Crochet Kpop Collection - Kpop Plush Doll, BTS Amigurumi Crochet, BT21 Mini Amigurumi, Kpop Collection Bts Charm, Keychain, Shooky THIS IS THE FINISHED ITEM, NOT A PDF FILE. Size: - Shooky 5" (12.5 cm) - Chimmy, RJ, Mang, Koya, Tata, Cooky: 6-7' (15-17cm) If you want customized size dolls, feel free to contact me! DETAILS: - Our amigurumi dolls is a hand-knitted product prepared by skilled hands. - These handmade rattles are made to order and crafted from 100% cotton yarn, filler - hypoallergenic hollow fiber. - The eyes are not plastic inserts but hand stitched with cotton yarns. - This product is made to order. CARE: - Our cute Amigurumi dolls should be hand washed or in a flimsy setting. - Do not iron, sun-dried is recommend PROCESSING TIME: - Processing times vary according to my volume order, but it usually takes about 1-2 weeks. SHIPPING: - Vietnam: 3-5 Days - US Delivery Time: 7-14 Business Days - Worldwide: 10-20 Business Days Thank you for stopping by!
So I've spent some time recently making two of these little baby doll/blanket/carrier sets, and I thought someone might like the pattern. To give credit where credit is due, there is at least a partial pattern on this site. Unfortunately, the original language is Danish, and crochet patterns don't translate very well. I think she only has a pattern for the carrier. I tried to follow it as well as I could, but with Google Translate phrases such as "crochet 20 air masks" and "symmetry in hank wagons" I just kind of gave up and made my own pattern. Hopefully no one minds! The carriers are lined with felt, and the dolls and blankets are removable. Ch - chain Sc - single crochet Dc - double crochet Hdc - half double crochet Sc2tog - single crochet two stitches together St - stitch Rnd - round Rep - repeat Yarn weight - worsted Hook - E (3.50 mm) You can join your rounds, or work in a spiral without joining - your choice. Blanket Ch 16 Row 1 - Hdc in 1st ch from hook, 14 hdc (15 st), ch 1 Row 2 - Ch 2, Dc in 2nd ch from hook and next 14 sts. Rows 3-6 - Repeat rows 1 & 2. Fasten off. Baby Head Rnd 1 - 5 sc in magic loop Rnd 2 - 2 sc in each sc (10) Rnd 3 - 2 sc in 1st st, 4 sc, rep around (12) Rnd 4-5 - Sc around Rnd 6 - Sc2tog, 4 sc, rep around (10) Stuff with fiberfill Rnd 7 - Sc2tog around (5) Finish stuffing and sew shut. Body Rnd 1 - In desired color, pick up 6 sc around where you finished off on the head. Rnd 2 - 2 sc in first, 1 sc around (9) Rnd 3 - 2 sc in first, 4 sc, 2 sc in next, 3 sc (11) Rnd 4-11 - Sc around, changing colors if you would like to make stripes. Rnd 12 - Sc2tog, 4 sc, sc2tog, 3 sc (9) Stuff and sew shut. Arms (2) Rnd 1 - 4 sc in magic loop Rnd 2 - 4 sc Rnd 3 - 5 sc (Increase however you like - I join my rounds so I just make an extra stitch in the last (slip) stitch before joining.) Rnd 4-5 - 5 sc Stuff Rnd 6 - Sc 2tog, 3 sc. Fasten off and leave tail for sewing to body. Hat Rnd 1 - 6 sc in magic loop Rnd 2 - 2 sc in each st around (12 sc) Rnd 3 - 2 sc in 1st st, 5 sc, rep around Rnd 4-6 - Sc around. Sew hat to head and arms to body. Carrier Rnd 1 - Ch 15, dc in 2nd st from hook and next 11, 6 dc in next, dc in next 12, 4 dc in last. Sl st to first st. Rnd 2 - Ch 1, 2 hdc in next, 12 dc, 2 hdc in next st, 2 sc in next 2 st, 2 hdc in each of next 2 sts, 14 dc,, 2 hdc in next, 2 sc in each of next 2 sts, sl st to first st. Rnd 3 - Ch 1, sc around in back loops. Rnd 4-6 - Sc around Rnd 7 - 7 sc, ch 6, skip 3 sts, sc 18, ch 6, skip 3 sts, sc 11, sl st to first st, ch 1 Rnd 8 - Sc2tog, 5 sc, 10 sc over handle loop, 6 sc, sc2tog 3 times, 6 sc, 10 sc over handle loop, 7 sc, sc2tog 2 times. Sl st to first st and fasten off. Cut out felt in a coordinating color and hot glue it to the inside bottom of the carrier (easiest if you flip it inside out to do so). I suppose you could sew it instead, if you like. Tuck your tiny babies inside their carriers with their blankets, and enjoy!