Elevate your home's curb appeal with the latest trends in front door portico designs. Discover innovative ideas and expert tips
ESP32 is an upgraded version of the ESP8266 module developed by Espressif Systems. This article presents new ESP32 projects that you can try this year.
GAZEBO JMI Gazebo 200x200Gazebo JMI, Kebutuhan masyarakat pada saat ini terhadap tempat melakukan aktivitas tidak hanya diperlukan…
Two person picnic table plans. Plans include a free PDF download, shopping list, cutting list, measurements, drawings, and step-by-step details.
Introduction - Materials Introduction This is a larger than normal traditional picnic table, which at a push can seat eight adults. The table is 2000mm (80") long and the top is 800mm (32") wide, so there's plenty of room for a bit of food, too! The complete unit is made…
After we finished our DIY deck back in March, it became even more apparent that we needed more outdoor seating. The only seating we had at the time was a round patio table with 4 chairs. Initially, we looked around for sectionals, but everything we liked was at least $2,500. Then we came across some plans to build your own outdoor sofa from Ana White...for around $50 in lumber! The cushions are the most expensive part of this project, but even so, we were able to build 3 sofas for under $800 total. Here is the original Ana White sofa design that we modeled our sofas after: Ana White Outdoor Sofa Plans It's a great basic design, but I wanted to modify it slightly by adding a couple more 2x4's for extra back support, as well as some 2x2's under the arm rests for more detail. We also built our sofas to the size of our cushions, so we used one less 2x4 on the seat bottom. Our sofa seats ended up being about 23.5" deep. Here's a comparison of the original vs. our sofa: I assumed the most difficult part of this project would actually be finding cushions that we liked in our budget, so we decided to pick out our cushions first & then build the sofas to those specific dimensions. Ideally, I wanted something in the grey family, but the few grey cushions I came across were either too brown, too thin, or too expensive. We ended up going with the IKEA KUNSO cushions in black instead: Here are the dimensions of our cushions: Back cushion dimensions: Width: 24 3/8 " Depth: 17 3/8 " Thickness: 7 1/8 " Bottom cushion dimensions: Width: 24 " Depth: 24 " Thickness: 4 " The entire sofa was built out of pine 2x4's, with the exception of the "X" detail under the arms - which were pine 2x2's. We did not use treated lumber for this project since I planned on staining & sealing the sofas - so we saved a little money by going with regular pine AND the lumber was also not as heavy since it wasn't treated. If you can afford to build with cedar, that is the way to go for outdoor furniture (since we were on a budget we went with pine). My dad helped us build the first sofa, but then we were on our own for the remaining two. Before we added the "X" detail: Another change we made was to the top 2x4 on the back rest - we decided to attach the 2x4 vertically to give the back a little more height and notched out the ends to fit on top of the arm rests: Here are the sofas after we added the 2x2 X detail under the arms: For extra support, we also screwed in two vertical 20" 2x4 supports on the back of each sofa: *UPDATE* Here are some more detailed photos of the back of the sofas from April 2020: Once all three sofas were assembled, I filled the holes with exterior wood filler & gave them a light sanding all over. I focused on the edges - particularly around the arm rests. Next, I gave them all one coat of semi-transparent stain & sealer in the color Pewter by Rustoleum: The stain is subtle in person (and even more difficult to tell the difference in photos), but the stain sort of reminds me of that gray driftwood Restoration Hardware look. I could have done a second coat of stain, but I was honestly exhausted & just wanted to be done. You can see the stain the best in this photo: Ana's original lumber list only calls for (11) 2x4x10' boards, but because of our modifications we ended up needing to buy the following for each sofa: (12) 2x4x10' (1) 2x4x8' (2) 2x2x8' Here is the final approximate cost breakdown: ONE SOFA: $65 lumber + $180 cushions = $245 THREE SOFAS: $195 lumber + $540 cushions = $735 We also spent $37 in stain, so our total cost was about $772 ($735 + $37). Please keep in mind there can be other costs involved depending on what materials, tools, or stains you already have on hand. We already had the screws we needed (mostly 2 1/2" & some 4" galvanized screws), sandpaper, wood glue, and tools - so all we needed to purchase was the lumber & stain. Overall, we love the sofas - they are comfortable & very sturdy! Since I didn't give step by step instructions, please let me know if you have any questions on our building process. We also ended up building an X-base dining table for our new deck as well. I will write a post on how we built that in the near future... Thanks for reading! Mel
What’s inside:
Ever Wanted To Make Your Own Barometer? It's really very easy, and only requires material you'll find in your home.
From simple projects to building furniture, from tool tutorials to all the tips and tricks you need to know - find them here!
About the lumber: plans and instructions About the lumber and dimensions All dimensions are in both Metric (mm) and Imperial (inches).The size (width and thickness) of the lumber referred to throughout this project is the nominal size. That is the size of the lumber before it has been dressed, planed…
This is one of the most useful projects that anyone could build. A picnic table is a simple plan and can be used virtually...
Plume mécanique (Sketchy)
Introduction - Materials Introduction This is a larger than normal traditional picnic table, which at a push can seat eight adults. The table is 2000mm (80") long and the top is 800mm (32") wide, so there's plenty of room for a bit of food, too! The complete unit is made…
I’ve spent most of this spring working on projects in our living room, but I’ve been itching to get outside and work on our outdoor spaces too. Do you remember our patio makeover from last year? Just a few simple updates like new throw pillow covers, a couple potted plants, and some simple decor accents transformed the entrance…
Make your home look more custom with our DIY backyard fence ideas! These are DIY projects to get you right on your way!
Build your own zoetrope and create your own animation. Hours of STEAM fun for kids who love art, engineering and science!
Art as we have said repetitively (and will keep saying it), will never stop surprising us with the massive scope that it has for expanding and adding new
Help Batman defeat The Joker with this handmade LEGO Joker pinata tutorial. It will be a big hit at your next Batman or Joker party.
