Схемы сварочных столов🔻 | Вступай в группу Глаза боятся руки делают в Одноклассниках
Clever knock-down sawhorse design saves space.
Welding Table: This is a welding table that I designed with inspiration from many different tables that I found on a variety of sites. I wanted a table that would be easy and inexpensive to build, have clamp access anywhere on the top, and have a flat working surf…
These 2 scaffolding trestles have frames which are height adjustable from 81 to 130 cm. These scaffolding trestles are portable and quickly foldable. You can work safely with the attached cross bracings. The slanted side will prevent you from falling against the place your working on.The trestle is intended for use as a working bench trestle in an indoor or outdoor environment. These scaffolding trestles have a load capacity of up to 150 kg. With a solid steel construction, our trestle also has a safety lock and anti-slip protection for your safety. Important note: Do not step onto the trestle! Adjustable height: 81-130 cm.Folded size: 68 x 81 cm.Color: blue / zinc-colored.Load capacity: up to 150 kg.
Welding Table: This is a welding table that I designed with inspiration from many different tables that I found on a variety of sites. I wanted a table that would be easy and inexpensive to build, have clamp access anywhere on the top, and have a flat working surf…
Welding Tables 150 x 150 x 67 x 8mm Corner Square Honestly one of the most handy jigs. All jigs, Squares, and tooling work universally across all tables and fixtures. Featuring Standard 16mm holes and 25-50mm spacing. Digital DXF files ready to go and quantities required, Save yourself the time! no need to learn CAD! Take a copy of the files provided and drop them into your local Laser Cutting service and get making!
DESCRIPTION Highlights: Assembled Width: 22-7/16" Assembled Length: 40-3/4" Work Surface Material: Resin Assembly Required: No Capacity: 500 lbs Power strip Ruler Protractor and drill hole Packaging Type: Boxed
How to Make a Low Cost Welding Table : DimensionsThe table top is 147cm x 80 cm with 7x3cm-x2mm rectangle tubing For the legs I used 6cm x2mm square tubing Casters is 100mm with wheel locks The hight is adjustable from 90cm to 105cm
Working in a small shop or garage can be challenging. There never seems to be enough bench space or work area for your projects so you need to make the most out of the limited space you have. The X-Bench workbench is designed to provide a large (30"x60") full height (36") work surface that can be set up and taken down in seconds. The X-Bench workbench is portable, lightweight, and easy to build. All of the materials are common, inexpensive, and easily found at most home improvement stores. Once built, you'll realize how incredibly versatile, convenient and simple this workbench is to use. These downloadable, 19 page plan sets include: Materials list, tool list, dimensioned (imperial) parts cut list, step by step written and illustrated building instruction for both the standard size (36" height) and the large size (42" height).
Free Woodworking Plans and tutorial to build a DIY Sawhorse Console Table!
New heavy discounts for higher quantities! If you order 4 you'll get an additional 28% off compared to ordering one! This sturdy welding square is an excellent tool for any welder or maker (works great for wood too!). These squares are laser cut from quarter-inch thick steel with better than 0.005" tolerances. The square is highly accurate and strong. It has cutaways to allow for ideal clamping and the 90º corner is relieved to allow access to the inside corner of the material being squared. The short sides are 8.5" long and the long side is 11.5" long. The square's sides are exactly 2" thick and perfectly perpendicular to the main web which works great for squaring against a work bench or table when the square is on its side! It ships flat-packed (unassembled) OR pre-assembled (see below), assembly is simple and fool-proof. The precision laser cut tabs and notches perfectly align all of the pieces; add a few tack welds in the recessed slots and you are good to go! The squares ship with detailed instructions and pictures. I NOW OFFER PRE-ASSEMBLED SQUARES!! I now offer squares completely assembled, welded, and ready for use! Simply choose one of the "Pre-assembled" options from the drop-down. Please let me know if you have any questions!
Like the head of a combination square, a ruler stop helps you make consistent layout marks from the edge of a workpiece. I made a ruler stop for nearly every steel rule in my shop, using scraps and a few pieces of hardware.