Have you ever tried to work colourwork in the round, but found that you’ve struggled to maintain your tension when the stretch between areas of the same colour is more than a few stitches? Ladderback Jacquard might be the technique you’re looking for! Rather than catching floats at the back of the knitting, the floats are caught in a separate layer of fabric that sits behind the main layer, so your floats are invisible from the front of the work, even if you’re working a long stretch of one colour. This tutorial shows you how to use Ladderback Jacquard when working two-colour colourwork in the round, and includes a mini project you can practise the technique on. Ready? Here’s how to work Ladderback Jacquard. The tutorial Before you begin Look at your chart and work out where to place the ladder stitches. You want 3-5 stitches between the ladders, and if you are working on DPNs or magic loop, it is helpful if you have a ladder stitch at the beginning or end of each needle – this helps you maintain tension at the ‘corners’. The ladders do not have to be evenly spaced, although you might find it easier to keep track of them if they are. Set-up Work as far as the start of the round before the first colourwork round. Set-up round On the rnd before the first round of colourwork (in this case, Rnd 1 of the chart), you need to add the ladder stitches as follows: Using MC, knit to the position of the first ladder stitch (picture 1). Using CC and starting with the yarn at the back of the work, take the yarn to the front of the work between the needles, then back over the needle to create a yarnover (picture 2). You should bring the CC up from under the MC when making the yarnover. Using MC, knit the next stitch, making sure the CC yarnover is trapped by the MC at the back of the work (picture 4). Using MC, knit to the position of the next ladder stitch (pictures 3 and 4). Repeat Steps 2-4 until you have reached the end of the round, making sure your tension is even on your MC stitches and that the CC floats are relaxed (pictures 5 and 6). First colourwork round Following the chart for the colour changes, knit to the first ladder stitch (picture 1). Bring both yarns to the front between the needles (picture 2). With just the float colour, purl the ladder stitch through the back of the loop. When you’re purling the float stitches, make sure the non-float yarn is in front of the purled stitch. This will ensure the ladder stitches do not show through at the front (picture 3). Take both yarns to the back between the needles (picture 4). Following the chart, knit to the next ladder stitch. Repeat Steps 2-5 until you have reached the end of the round (pictures 5 and 6). All further colourwork rounds Following the chart, knit to the first ladder stitch. Bring both yarns to the front between the needles. With just the float colour, purl the ladder stitch. As before, make sure the non-float yarn is in front of the stitch you are purling. Take both yarns to the back between the needles. Following the chart, knit to the next ladder stitch. Repeat Steps 2-5 until you have reached the end of the round (pictures 1 and 2 show what your work should look like from the front and the back). Note on the colour of the ladder The float colour will not necessarily be consistent up the ’ladder’ – use the ‘float’ yarn, regardless of the colour. In the example, the ladder should be worked in the following colour: Rnd 2: Ladder 1: MC; ladder 2: CC Rnds 3-8: Ladders 1 and 2: MC Rnds 9-10: Ladder 1: CC; ladder 2: MC Rnd 11: Ladders 1 and 2: CC Ladder 3 is worked in CC throughout. Where the ladder happens between colour changes in the chart, you should use the colour to the left of the ladder for the ladder, e.g. for the ladder between stitches 7 and 8 in Round 2, you should work the ladder in CC. Finishing round The finishing round is worked on the round after the final colourwork round. Break CC. Knit to 1 stitch before ladder stitch (picture 1). Slip the final MC stitch knitwise with yarn in back, slip the ladder stitch knitwise with yarn in back, knit the two slipped stitches together through back of loop (picture 2). Repeat Steps 2-3 until you have reached the end of the round (picture 3). Once you have completed the finishing round, all your stitches will be in MC. Continue working in MC alone as directed in the pattern. Finishing Weave in your ends. You can reduce show-through by weaving the ends into the ladder layer. ******** Ladderback jacquard test piece You will need: · Scraps of yarn in two colours (MC and CC) o The yarn should be the same weight, and same composition. o A wool or wool blend is ideal for this technique. o The yarns should have good contrast so you can see what you’re doing. · A long circular needle [at least 80 cm (32 in) in length] for working magic loop, or DPNs in an appropriate size for your yarn: o 4ply: 3 mm o DK: 4 mm o Aran: 5 mm o Chunky: 6 mm · Stitch marker x 1 Instructions Using MC, cast on 22 sts. Join in the rnd, taking care not to twist the cast-on edge. Pm to mark beginning of rnd, slip this marker at the end of each rnd. Rnds 1-2: Using MC, *k1, p1; rep from * to end. Rnd 3: Using MC, k to end. Rnd 4: Work the Ladderback Jacquard Set-up round. Rnds 5-16: Work Heart Chart Rnds 1-12, using Ladderback Jacquard to control the floats. Rnd 17: Work the Ladderback Jacquard Finishing round. Rnds 18-19: Using MC, *k1, p1; rep from * to end. Using MC, cast off all sts loosely in pattern. Finishing Weave in all ends. Stand back and admire! Abbreviations sts: stitches rnd(s): round(s) pm: place marker k: knit p: purl CC: contrast colour MC: main colour ********* Thanks for using this Ladderback Jacquard tutorial, I hope you found it helpful. If you did, why not sign up to my newsletter so you can be first to hear about my latest designs, tutorials and craftalongs? You can find my patterns on: Ravelry PayHip LoveCrafts
This adorable jumper, designed by Vikki Bird, features every child's TV favourite Sooty! This fun children's sweater is knit in a Sublime DK weight yarn and uses an intarsia technique to create it's iconic motif. [https://s3.eu-west-2.amazonaws.com/craft-world/uploads/file/3/7/370fdbf8-4db5-4f3c-aaba-1ad50f131425/sootyjumper_knittingpattern_craftworld.pdf] Happy knitting! Kate x
Available on: PayHip Ravlery* LoveCrafts ********* I LOVE Christmas socks and wear them as soon as I see the first Christmas decorations in the shops. These festive Jolly Holly Socks are made using aran weight sock yarn, making them perfect for cosying up by the fireside, wearing to lounge about, or for pottering around the house as you’re wrapping your Christmas presents. Being knitted in aran yarn means they also make quick last-minute gifts. The socks are knitted from the cuff down with a heel flap and gusset construction. The contrast cuff is knitted, then a short colourwork section is worked to transition into the striped leg. The rest of the sock is knitted in a simple stripe-pattern, until just before the toe, when a second colourwork section is added; the sock is finished with a contrast heel and toe. The toe is Kitchener-free, finished by gathering the final few stitches. The socks are knitted from the top down using a standard heel flap and gusset construction. The foot length of the socks is adjustable to fit. The pattern is written to be needle-neutral and can be knitted using either the magic-loop technique, short circulars or DPNs, depending on your individual preference. The pattern also features helpful hints for beginners. Sizes A (B, C, D, E, F, G) Finished sock circumferences: 11 (13.5, 16.5, 19, 22, 24.5, 27.5) cm 4.25 (5.5, 6.5, 7.75, 8.75, 9.75, 11) in; for the best fit, choose a size that is approximately 2.5 cm 1 in smaller than your foot circumference. Leg length to heel: 7.5 (10, 12.5, 15, 18, 20.5, 23) cm 3 (4, 5, 6, 7, 8, 9) in. Foot length is adjustable. Tension 22 sts and 32 rnds = 10 cm 4 in in stocking stitch and worked in the rnd on 4 mm (US 6) needle(s) after wet blocking, or size needed to obtain correct tension. Yarn Aran-weight yarn in the following colours and amounts: 55 (85, 120, 165, 215, 265, 335) m 65 (95, 135, 185, 240, 290, 370) yds C1 (red) 5 (10, 10, 15, 20, 25, 30) m 10 (15, 15, 20, 25, 30, 35) yds C2 (green) 15 (25, 35, 45, 60, 70, 90) m 20 (30, 40, 50, 70, 80, 100) yds C3 (cream) Amounts are approximate as the amount of yarn used will depend on the length of the foot, which is adjustable. I would recommend using a dedicated sock yarn that is tightly plied wool and has some nylon content for durability. You can also knit these socks in 4-ply sock yarn held double. If you do this, you will need double the yardages listed. Needles 3.5 mm (US 4) and 4 mm (US 6) DPNs, 15 cm 6 in, set of 5, or 3.5 mm (US 4) and 4 mm (US 6) circular needle, at least 80 cm 32 in in length to work magic loop, or 3.5 mm (US 4) and 4 mm (US 6) circular needle, 22.5 cm 9 in in length Notions * Stitch markers x 5 Pattern notes The instructions are for the smallest size, with larger sizes in parentheses: A (B, C, D, E, F, G). The sample details are as follows: Novita 7 Veljestä (7 Brothers) (aran, 200 m per 100 g ball, 75% wool, 25% nylon) in 549 Christmas (C1), 366 Nettle (C2) and 010 Off-White (C3). Knitted in size E, to fit a UK women’s size 10 foot length 27.5 cm (10.75 in). Pattern edited by Jo Torr. *Ravelry link. May affect people with photosensitivity. Proceed with caution. ********* Available on: PayHip Ravlery* LoveCrafts *********
Harvest's Bounty was created for my daughter’s first autumn. It’s a quick and simple pattern, and would make the perfect gift for any new baby, or an excellent novelty hat for any other age group. The hat is also ideal as a Halloween or harvest accessory.The hat is knitted in the round in a wide rib pattern, with a 2 x 2 ribbed edge. The stalk is incorporated with a simple colour change for the very top of the hat; the leaf and tendrils are knitted separately and stitched in place to give the hat a 3-dimensional feel. The leaf design is unique to this pattern and is double sided so that it lies completely flat.The instructions cover five sizes, from baby to adult.If you would prefer to use acrylic yarn for the hat, Stylecraft Special DK in Spice (1711), Walnut (1054) and Meadow (1065) would be good options. You will require one ball of each colour.
Little sailor vest is a vintage-inspired piece, featuring a traditional sailing boat. The vest is the perfect traditional item for a baby or young child. The vest is knitted from the bottom up in pieces. The boat is worked on a stocking stitch background using the intarsia technique. The hem, armholes and necklines are worked using 2 x 2 rib; the armholes and necklines are picked up and added after the garment has been seamed. The shoulders are fastened using buttons to allow for easy dressing. The pattern is written for eight sizes, ranging from 3 months to 8 years [finished chest sizes 45.5 to 71 cm (18.25 to 28.5 in)], and is worked in a sport to DK weight yarn. The instructions for the intarsia section are given both in chart format and as written instructions.
******** Available on: Ravelry PayHip ******** Do you love Christmas socks? I would (and do) happily wear them all year round! They get even more wear when the first Christmas decorations appear! If you love Christmas socks as much as I do, the festive House Elf Socks are the ones for you! They’re made using aran weight sock yarn, making them perfect for cosying up by the fireside, wearing to lounge about, or for pottering around the house as you’re wrapping your Christmas presents. Being knitted in aran yarn means they also make quick last-minute gifts. The socks are knitted from the cuff down with a heel flap and gusset construction. The contrast cuff is knitted, then a three-row colourwork pattern is worked to transition into the striped leg. The rest of the sock is knitted in a simple stripe-pattern, and has a contrast heel and toe. The toe is Kitchener-free, finished by gathering the final few stitches. The foot length of the socks is adjustable to fit. The pattern is written to be needle-neutral and can be knitted using either the magic-loop technique, short circulars or DPNs, depending on your individual preference. The pattern also features helpful hints for beginners. ******** Available on: Ravelry PayHip ******** Sizes A (B, C // D, E, F // G) Finished sock circumferences: 11 (13.5, 16.5 // 19, 22, 24.5 // 27.5) cm [4.25 (5.5, 6.5 // 7.75, 8.75, 9.75 // 11) in]; for the best fit, choose a size that is approximately 2.5 cm (1 in) smaller than your foot circumference. Leg length to heel: 7.5 (10, 12.5 // 15, 18, 20.5 // 23) cm [3 (4, 5 // 6, 7, 8 // 9) in]. Foot length is adjustable. Tension 22 sts and 32 rnds = 10 cm (4 in) in stocking stitch and worked in the rnd on 4 mm (US 6) needle(s) after wet blocking, or size needed to obtain correct tension. Yarn Aran-weight yarn in the following colours and amounts: 20 (30, 45 // 60, 80, 100 // 125) m [25 (35, 50 // 70, 90, 110 // 140) yds] C1 (red) 25 (35, 50 // 65, 85, 105 // 135) m [30 (40, 55 // 75, 95, 115 // 150) yds] C2 (green) 25 (40, 55 // 75, 100, 120 // 150) m [30 (45, 65 // 85, 110, 135 // 165) yds] C3 (cream) Amounts are approximate as the amount of yarn used will depend on the length of the foot, which is adjustable. I would recommend using a dedicated sock yarn that is tightly plied wool and has some nylon content for durability. You can also knit these socks in 4-ply sock yarn held double. If you do this, you will need double the yardages listed. Needles 3.5 mm (US 4) and 4 mm (US 6) DPNs, 15 cm (6 in), set of 5, or 3.5 mm (US 4) and 4 mm (US 6) circular needle, at least 80 cm (32 in) in length to work magic loop, or 3.5 mm (US 4) and 4 mm (US 6) circular needle, 22.5 cm (9 in) in length Notions Stitch markers x 5 Pattern notes The instructions are for the smallest size, with larger sizes in parentheses: A (B, C // D, E, F // G). The sample details are as follows: Novita 7 Veljestä (7 Brothers) (aran, 200 m per 100 g ball, 75% wool, 25% nylon) in 549 Christmas (C1), 366 Nettle (C2) and 010 Off-White (C3). Knitted in size 5, to fit a UK women’s size 7 [foot length 25 cm (9.75 in)]. Pattern edited by Jo Torr. This pattern was first published in issue 134 of Knit Now Magazine. #HouseElfSocks #VBDHouseElfSocks #VikkiBirdDesigns ******** Available on: Ravelry PayHip ********
Availalable on: PayHip Ravelry* LoveCrafts ******** T’was the night before Christmas, and all through the house, nothing was stirring, except for… two children attempting to set a Santa trap, some last minute present wrapping, and an argument about whether the turkey will fit in the oven. Christmas doesn’t always run smoothly, but when I go to bed, I love the excitement in my children’s eyes when they hang out their stockings, even if they’re a little sceptical about whether Santa will actually have delivered any presents in the morning. No matter how chaotic your Christmas Eve is, there’s still space for a traditional Christmas stocking, either hung over the fireplace, or on the bedstead. The Fireside Stocking is knitted from the top down in the round, with stripes of traditional festive colourwork motifs: trees, stars, hearts and reindeer. The stocking is a good size, with plenty of space for all those gifts that Santa will deliver on Christmas Eve. So your beautiful colourwork doesn’t get caught while Santa is filling the stocking, I’ve included tips on how to take control of your floats. The top of the stocking has plenty of space to embroider a name, which solves any later arguments about whose stocking is whose! Adding a name also makes the Fireside Stocking a perfect gift. A tutorial is included on how to embroider the name if you’re new to embroidery. Sizes One size: Circumference: 37 cm (14.75 in) Leg length to heel: 37.5 cm (15 in) Foot length from heel to tip of toe: 28.5 cm (11.5 in) Tension 19 sts and 26 rnds = 10 cm (4 in) in stocking stitch worked in the round on 4.5 mm (US 7) needles after wet blocking, or size needed to obtain correct tension. You may find that you need to use a different needle size for the colourwork sections to maintain the same gauge throughout. Yarn Aran-weight yarn in the following colours and amounts: A (red): 185 m (200 yds) B (cream): 165 m (180 yds) C (green): 80 m (90 yds) Needles 4.5 mm (US 7) circular needle 40 cm (16 in) in length and DPNs 4 mm (US 6) circular needle 40 cm (16 in) in length Notions Stitch markers x 3 Chart row marker Scissors for cutting paper Sewing pins Tapestry needle Sewing thread (optional) Pattern notes The sample is knitted in Drops Alaska (aran, 70 m per 50 g ball, 100% wool) in Dark Red 11 (A), Off White 02 (B) and Light Olive 45 (C). Links to the following resources are given at the end of the pattern: • Wrap and turn • Yarn dominance • Catching long floats • Ladderback jacquard This pattern was tech edited by Jo Torr. *Ravelry link: may affect people with photosensitivity. Proceed with caution. ******** Availalable on: PayHip Ravelry* LoveCrafts
Availalable on: PayHip Ravelry* LoveCrafts ******** T’was the night before Christmas, and all through the house, nothing was stirring, except for… two children attempting to set a Santa trap, some last minute present wrapping, and an argument about whether the turkey will fit in the oven. Christmas doesn’t always run smoothly, but when I go to bed, I love the excitement in my children’s eyes when they hang out their stockings, even if they’re a little sceptical about whether Santa will actually have delivered any presents in the morning. No matter how chaotic your Christmas Eve is, there’s still space for a traditional Christmas stocking, either hung over the fireplace, or on the bedstead. The Fireside Stocking is knitted from the top down in the round, with stripes of traditional festive colourwork motifs: trees, stars, hearts and reindeer. The stocking is a good size, with plenty of space for all those gifts that Santa will deliver on Christmas Eve. So your beautiful colourwork doesn’t get caught while Santa is filling the stocking, I’ve included tips on how to take control of your floats. The top of the stocking has plenty of space to embroider a name, which solves any later arguments about whose stocking is whose! Adding a name also makes the Fireside Stocking a perfect gift. A tutorial is included on how to embroider the name if you’re new to embroidery. Sizes One size: Circumference: 37 cm (14.75 in) Leg length to heel: 37.5 cm (15 in) Foot length from heel to tip of toe: 28.5 cm (11.5 in) Tension 19 sts and 26 rnds = 10 cm (4 in) in stocking stitch worked in the round on 4.5 mm (US 7) needles after wet blocking, or size needed to obtain correct tension. You may find that you need to use a different needle size for the colourwork sections to maintain the same gauge throughout. Yarn Aran-weight yarn in the following colours and amounts: A (red): 185 m (200 yds) B (cream): 165 m (180 yds) C (green): 80 m (90 yds) Needles 4.5 mm (US 7) circular needle 40 cm (16 in) in length and DPNs 4 mm (US 6) circular needle 40 cm (16 in) in length Notions Stitch markers x 3 Chart row marker Scissors for cutting paper Sewing pins Tapestry needle Sewing thread (optional) Pattern notes The sample is knitted in Drops Alaska (aran, 70 m per 50 g ball, 100% wool) in Dark Red 11 (A), Off White 02 (B) and Light Olive 45 (C). Links to the following resources are given at the end of the pattern: • Wrap and turn • Yarn dominance • Catching long floats • Ladderback jacquard This pattern was tech edited by Jo Torr. *Ravelry link: may affect people with photosensitivity. Proceed with caution. ******** Availalable on: PayHip Ravelry* LoveCrafts
Beautiful fabric Woodpecker brooch intricately embroidered by Vikki Lafford Garside. Measurements approximately 3cm (w) x 7cm (h) x 1cm (D) See more pieces available by Vikki Lafford Garside About Vikki Lafford Garside Like many young girls, I dreamt of being a princess in a fairy tale, with sparkling crystal slippers and beautiful, flowing gowns of the most sumptuous fabrics, adorned with exquisite embroidery and embellishment. I imagined a world of fairies and woodland creatures inhabiting the gloomy depths of the Cotswold Countryside in which I spent my childhood. My love of detail and embellishment was always a huge inspiration for my work and it led me to achieve a degree in Embroidery in 2002, followed by a Masters Degree in Textile Design at Chelsea College of Art and Design. There I created my first collection of dresses based on old versions of popular fairy tales. Now working as a designer-maker I am still inspired by the fairy tales, folklore and nature I appreciated as a child. I mix traditional hand stitch and hand painting with innovative techniques of stitch, print and heat manipulation to create feminine, hand crafted dresses and accessories. My fashion accessories collection features individually hand crafted brooches and clips in luxury fabrics, adorned with intricate embroidery, Japanese glass beads, Swarovski crystals and freshwater pearls.
Home of Vikki Bird Designs: cheerful knitting patterns for babies and children.
Availalable on: PayHip Ravelry* LoveCrafts ******** T’was the night before Christmas, and all through the house, nothing was stirring, except for… two children attempting to set a Santa trap, some last minute present wrapping, and an argument about whether the turkey will fit in the oven. Christmas doesn’t always run smoothly, but when I go to bed, I love the excitement in my children’s eyes when they hang out their stockings, even if they’re a little sceptical about whether Santa will actually have delivered any presents in the morning. No matter how chaotic your Christmas Eve is, there’s still space for a traditional Christmas stocking, either hung over the fireplace, or on the bedstead. The Fireside Stocking is knitted from the top down in the round, with stripes of traditional festive colourwork motifs: trees, stars, hearts and reindeer. The stocking is a good size, with plenty of space for all those gifts that Santa will deliver on Christmas Eve. So your beautiful colourwork doesn’t get caught while Santa is filling the stocking, I’ve included tips on how to take control of your floats. The top of the stocking has plenty of space to embroider a name, which solves any later arguments about whose stocking is whose! Adding a name also makes the Fireside Stocking a perfect gift. A tutorial is included on how to embroider the name if you’re new to embroidery. Sizes One size: Circumference: 37 cm (14.75 in) Leg length to heel: 37.5 cm (15 in) Foot length from heel to tip of toe: 28.5 cm (11.5 in) Tension 19 sts and 26 rnds = 10 cm (4 in) in stocking stitch worked in the round on 4.5 mm (US 7) needles after wet blocking, or size needed to obtain correct tension. You may find that you need to use a different needle size for the colourwork sections to maintain the same gauge throughout. Yarn Aran-weight yarn in the following colours and amounts: A (red): 185 m (200 yds) B (cream): 165 m (180 yds) C (green): 80 m (90 yds) Needles 4.5 mm (US 7) circular needle 40 cm (16 in) in length and DPNs 4 mm (US 6) circular needle 40 cm (16 in) in length Notions Stitch markers x 3 Chart row marker Scissors for cutting paper Sewing pins Tapestry needle Sewing thread (optional) Pattern notes The sample is knitted in Drops Alaska (aran, 70 m per 50 g ball, 100% wool) in Dark Red 11 (A), Off White 02 (B) and Light Olive 45 (C). Links to the following resources are given at the end of the pattern: • Wrap and turn • Yarn dominance • Catching long floats • Ladderback jacquard This pattern was tech edited by Jo Torr. *Ravelry link: may affect people with photosensitivity. Proceed with caution. ******** Availalable on: PayHip Ravelry* LoveCrafts
Ready for you to knit - personalised Mr Men & Little Miss Christmas stockings, An original Knitnow knitting pattern. Charachters are : Mr Happy and Little Miss Sunshine Perfect for the holiday season, designed by Vikki Bird The 4 page pattern was exclusive to Knitnow magazine, published in 2018 now out of print Stockings measure : 9", 23cms from heel to toe 13.75" 35cms from stocking top to heel 13.75" 35cms all around Instructions include 3 intarsia charts and finishing instructions that include 3d effects (hat pompom & plaits) as well as a hanging loop. The back page has 2 alphabet charts : 26 letters in upper case , 26 in lower case for personalisation - added on with duplicate stittch Pre-loved and is in good condition, some signs of use & clear of notes by previous users. Each page measures 8”, 20cms across & 11.75”, 30cms down
Ceramics have a rich and storied history that dates back thousands of years, with their origins rooted in ancient civilizations across the globe. From the delicate porcelain of ancient China to the robust earthenware of early Europe, ceramics have long been valued for their beauty, versatility, and enduring strength. These qualities made ceramics a symbol of both artistic expression and practical utility, and over time, they became a revered medium for commemorating significant life events. The tradition of giving ceramics as a ninth-anniversary gift can be traced back to medieval times, when gifts were often chosen based on their symbolic meaning. Ceramics, with their inherent qualities of durability and resilience, became a perfect metaphor for the journey of marriage. Just as raw clay is carefully molded, shaped, and fired into a work of art, so too does a relationship evolve and strengthen through the dedicated care and attention of both partners. The process of creating ceramics—transforming something soft and malleable into a form that is both beautiful and enduring—mirrors the way a marriage grows and solidifies over time. By choosing a ceramic gift for your ninth anniversary, you are honoring the tradition of celebrating the enduring qualities of your relationship. Ceramics symbolize the molding of your bond into something that is not only beautiful but also resilient and valuable. They represent the care and effort you have both invested in nurturing your relationship, turning it into something that can withstand the tests of time. As you celebrate this special milestone, may the serene melodies of your ceramic wind bell serve as a lasting reminder of your love, commitment, and the beautiful life you have created together. The gentle chime of the bell echoes the harmony and peace you have found in each other, and its enduring nature reflects the strength and permanence of your bond. This anniversary, let the gift of ceramics remind you of the importance of nurturing and preserving your relationship. Just as a piece of ceramic is shaped and refined through a careful and thoughtful process, so too is a strong and loving marriage. May your ceramic wind bell be a symbol of the journey you have taken together, and may its serene sounds bring you comfort, joy, and a reminder of the love that continues to grow between you. **Please type out a “gift message” with your order and we will include this free note and kraft envelope with your package.** Gift for: Traditional 9th Anniversary gift Wedding Housewarming Baby Shower Anniversary gift for him Construction: Handcrafted from durable, unglazed stoneware clay Fired at 2200 degrees 4-inch hanging chain with flexible wrapping hook Total hanging length: 14 to 15 inches Width: 2 ½ inches Proudly handmade in the USA Materials: Ceramic bell body and stamped bead Hand-sculpted bird topper Patinaed copper wind sail Glass accent beads Exclusive Availability: Support small business & Save 10% by shopping on EarthWindBells.com Also find me at Earth Wind Bells on Etsy HOW THE NINTH ANNIVERSARY EARTHWIND BELL SOUNDS: Reviews from our customers: “Extraordinary handmade piece! I ordered this as a ninth anniversary gift for my wife. She absolutely loved it! Quick shipping and packed extremely well. I would definitely recommend to others!” -William “Amazing wind chime as a gift for my dad for Christmas!! Quality is impeccable and he is absolutely going to love it!! Thank you so much!!” -Sara “Beautiful. Hand-crafted. One of a kind. Anniversary gift. Thank you <3” -Noelle **Please note that each bell is individually crafted, resulting in slight variations from the photos provided. The birds and beads may differ from those pictured, but we strive to match the images as closely as possible. If you prefer a wind chime identical to the photo, please contact us before ordering to check the availability of specific beads or birds.** **Please be aware I am the originator of this design. Counterfeit versions of these bells are being sold by unauthorized Chinese manufacturers on platforms like Walmart, eBay, Facebook, Google, and Amazon. To ensure you receive the genuine, artisan-made product, shop only on Etsy or our official website.** I ship Priority Mail (2-4 days in the US). **Do note, crafting these wind chimes by hand may take a week or so from the time of order. We always strive to expedite this process and answer any queries you might have.** *** Contact me with questions about EarthWind Bells*** DIRECTIONS FOR WINDCHIME USE: Wrap or hang on a sturdy branch or hook. Bring indoors in extremely cold weather to help with longevity. Copyright ©2024 Earthwind Bells.
Advent calendars are a big thing in the UK: the original advent calendars had you open a door on a cardboard calendar every day in the lead up to Christmas, at some point these were upgraded to cardboard calendars with a chocolate behind each door, and in the past few years luxury calendars with *anything you like* behind the doors have become really popular! Obviously these countdown calendars are a huge commercial opportunity, but you don’t have to spend a fortune: if you knit a lot, you probably have plenty of yarn scraps lying around, so you can make your own! If you’re bored of your own yarn scraps, you can arrange to swap yarn advents with a friend, so you get to appreciate their leftovers, and yours get a new and appreciative audience. Countdown calendars aren’t just for advent, you can also use them to countdown to a big birthday, to cheer up a particularly bleak looking month (hi there, February), or to make your yarn scraps look more appealing! So, how can you make your own yarn advent? 1. Gather your leftovers! Anything goes for this step! It is sensible though to make sure all your yarn scraps are the same weight, so choose one weight of yarn (e.g. 4ply or DK), and gather all your leftovers of that weight. 2. Make your scraps presentable If you’re swapping yarn advents with someone else, you’ll want to agree in advance how much yarn you’re going to include in each package: anything 5 g or larger gives you plenty of opportunity to create something sizeable out of your countdown calendar. 5 g balls will make a good-sized pair of socks; 20 g balls will make a decent-sized lap blanket. If your leftovers are lots of different sizes, you’ll need to wind off a constant amount from each scrap. You can either do this with a set of scales: Wind off what you need into a neat ball Stop when you get to the required amount Snip the yarn and move on to the next yarn Or go by length: Create a metre-long guide – use a length of yarn, or a strip of cardboard Measure out the desired length of yarn (e.g. if a sock yarn has 400 m per 100 g, 5 g will be (5 g/100 g x 400 m =) 20 m Wind your yarn into neat balls You can also make your yarns into mini skeins, but it’s a lot of effort, and they’ll need rewinding so you can knit from them, so you may as well save yourself a step! 3. Grab some packaging materials and any extras You can use anything you like to package your scraps Paper bags Little boxes Wrapping paper scraps Fabric scraps I used little paper bags for mine (you can order them in bulk cheaply online). You might want to label your little yarn packages (totally optional if it doesn’t really matter what order they’re opened in). You can do this using pieces of card tied on with string, or stickers. You can buy stickers pre-printed with numbers, but I used some plain stickers, stamped them with festive designs then wrote the numbers on with a marker pen. A yarn package is always extra nice if it comes with an edible treat, so I bought some chocolate coins and mini chocolate bars to add to my packages (if you’re doing this for someone else, don’t forget to check for allergies). 4. Package your yarn Wrap your yarn, one parcel per day. Each of my packages contained yarn and one or two sweet treats. I then used my number stickers to seal the packages. 5. Present your yarn advent To present your yarn advent, you can: Put all your little parcels in a bag Hang your parcels on a string using little pegs Display your packages in a box Put your parcels in the pockets of a fabric advent calendar Buy a refillable advent calendar with doors or drawer and put one parcel in each compartment If you’re sending your yarn advent to someone, don’t forget to add a little note or card to say hello, and make sure the outer packaging is nice and secure so none of the little parcels escape. All done! If you want suggestions on what to make with your yarn countdown calendar, stay tuned for tomorrow’s blog post, which will feature a host of pattern suggestions.
Availalable on: PayHip Ravelry* LoveCrafts ******** T’was the night before Christmas, and all through the house, nothing was stirring, except for… two children attempting to set a Santa trap, some last minute present wrapping, and an argument about whether the turkey will fit in the oven. Christmas doesn’t always run smoothly, but when I go to bed, I love the excitement in my children’s eyes when they hang out their stockings, even if they’re a little sceptical about whether Santa will actually have delivered any presents in the morning. No matter how chaotic your Christmas Eve is, there’s still space for a traditional Christmas stocking, either hung over the fireplace, or on the bedstead. The Fireside Stocking is knitted from the top down in the round, with stripes of traditional festive colourwork motifs: trees, stars, hearts and reindeer. The stocking is a good size, with plenty of space for all those gifts that Santa will deliver on Christmas Eve. So your beautiful colourwork doesn’t get caught while Santa is filling the stocking, I’ve included tips on how to take control of your floats. The top of the stocking has plenty of space to embroider a name, which solves any later arguments about whose stocking is whose! Adding a name also makes the Fireside Stocking a perfect gift. A tutorial is included on how to embroider the name if you’re new to embroidery. Sizes One size: Circumference: 37 cm (14.75 in) Leg length to heel: 37.5 cm (15 in) Foot length from heel to tip of toe: 28.5 cm (11.5 in) Tension 19 sts and 26 rnds = 10 cm (4 in) in stocking stitch worked in the round on 4.5 mm (US 7) needles after wet blocking, or size needed to obtain correct tension. You may find that you need to use a different needle size for the colourwork sections to maintain the same gauge throughout. Yarn Aran-weight yarn in the following colours and amounts: A (red): 185 m (200 yds) B (cream): 165 m (180 yds) C (green): 80 m (90 yds) Needles 4.5 mm (US 7) circular needle 40 cm (16 in) in length and DPNs 4 mm (US 6) circular needle 40 cm (16 in) in length Notions Stitch markers x 3 Chart row marker Scissors for cutting paper Sewing pins Tapestry needle Sewing thread (optional) Pattern notes The sample is knitted in Drops Alaska (aran, 70 m per 50 g ball, 100% wool) in Dark Red 11 (A), Off White 02 (B) and Light Olive 45 (C). Links to the following resources are given at the end of the pattern: • Wrap and turn • Yarn dominance • Catching long floats • Ladderback jacquard This pattern was tech edited by Jo Torr. *Ravelry link: may affect people with photosensitivity. Proceed with caution. ******** Availalable on: PayHip Ravelry* LoveCrafts
The Daisy Chain Blanket is big and bold, and perfect for Spring and Summer. The blanket is knitted from the bottom up, starting with a moss stitch border. The daisy pattern is knitted into the main body of the blanket using the intarsia technique, and the moss stitch borders up the sides of the blanket are worked at the same time as the main body. Once you’ve worked the main body of the blanket, you finish it with a top border made of moss stitch. All you need to do at the end is weave in all the loose ends (ok, that might take you a little while, but if you weave some in every few rows, by the time you finish the blanket, there won’t be many left to weave in) and you’re done. The intarsia blocks in this blanket are nice and large, which means the colour changes aren’t too frequent, making this a good project if you’re fairly new to intarsia – just take it slowly and you’ll be amazed what you can do! The colour changes are included as both a chart and as written instructions.
Beautiful fabric brooch, intricately hand embroidered and painted by Vikki Lafford Garside. This charming robin brooch is created from many layers of fabrics that are embroidered and painted to create a three-dimensional effect. The reverse is backed with soft felt and the edges are sealed so that the fabric does not fray. The brooch is lightweight, soft, flexible and fairly robust so very easy to wear on any garment. Supplied packaged in its own box and accompanied with a biography about the maker. The brooch measures approximately 2.5cm [w] x 10cm (h) x 1cm (d). Please note that due to the hand-crafted nature of the piece some slight variations may occur. See more pieces available by Vikki Lafford Garside About Vikki Lafford Garside Like many young girls, I dreamt of being a princess in a fairy tale, with sparkling crystal slippers and beautiful, flowing gowns of the most sumptuous fabrics, adorned with exquisite embroidery and embellishment. I imagined a world of fairies and woodland creatures inhabiting the gloomy depths of the Cotswold Countryside in which I spent my childhood. My love of detail and embellishment was always a huge inspiration for my work and it led me to achieve a degree in Embroidery in 2002, followed by a Masters Degree in Textile Design at Chelsea College of Art and Design. There I created my first collection of dresses based on old versions of popular fairy tales. Now working as a designer-maker I am still inspired by the fairy tales, folklore and nature I appreciated as a child. I mix traditional hand stitch and hand painting with innovative techniques of stitch, print and heat manipulation to create feminine, hand crafted dresses and accessories. My fashion accessories collection features individually hand crafted brooches and clips in luxury fabrics, adorned with intricate embroidery, Japanese glass beads, Swarovski crystals and freshwater pearls.
Have you got a baby on the way? Maybe a friend or family member does? Are you looking for the perfect gift for them? The Giraffe Family Blanket might be just the thing! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** When I was little, I wanted a pet giraffe! I’ve always been tall, and when I was little I found these tallest of animals fascinating. I would have loved the Giraffe Family Baby Blanket as a small child, and this makes the perfect gift for a new baby (especially if the parents are tall!). At 91 x 71 cm (35.75 x 28 in), the blanket is sized to fit a pram, stroller, Moses basket or crib, and can also be rolled out on the floor and used as a playmat. The blanket is knitted in one piece with the giraffes being incorporated using the intarsia technique. The giraffes stand against a green grass and blue sky background, and the edge stitches of the blanket are knitted in moss stitch to prevent curling. The blanket instructions are written out in full, with both charts and written instructions for the giraffes. Ready to cast on? Pick up your copy now! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** ******** Want the technical info? Keep reading... Sizes One size: 91 x 71 cm (35.75 x 28 in) Tension 16 sts and 22 rows = 10 cm (4 in) in stocking stitch worked flat on 5.5 mm (US 9) needles after wet blocking, or size needed to obtain correct tension. Yarn Aran-weight yarn in the following colours and amounts: A (green): 125 m (140 yds); B (pale blue): 520 m (570 yds); C (yellow): 115 m (130 yds); D (brown): 40 m (45 yds); E (black): 5 m (10 yds) The yardages given are enough to knit the grass, sky, and yellow portion of the giraffes, then add the spots and faces using duplicate stitch. If you knit the whole blanket using intarsia, you will find you need less yellow than stated. I would recommend using an acrylic, wool, or wool/acrylic blend yarn with plied structure and good stitch definition. If you are making the blanket for a baby, you may wish to consider using a machine washable yarn to make the blanket easy to care for. Needles 5 mm (US 8) circular needle at least 80 cm (32 in) in length; 5.5 mm (US 9) circular needle at least 80 cm (32 in) in length Notions Stitch markers x 4; Bobbins for holding the different yarn colours during colourwork; Chart row marker; Tapestry needle Pattern notes The sample is knitted in Stylecraft Special Aran (aran, 196 m per 100 g ball, 100% acrylic) in Meadow 1065 (A), Cloud Blue 1019 (B), Saffron 1081 (C), Mocha 1064 (D) and Black 1002 (E). Weave your ends into regions of the same colour to avoid show-through. Weave in your ends every 10 or so rows to avoid having to do them all at the end. When working from the chart, odd numbered rows should be worked right to left, and even numbered rows should be worked from left to right. If you find that printing the chart on A4 paper is too small to easily read, you can find a few solutions in this blog post: https://www.vikkibirddesigns.com/2021/10/making-knitting-charts-larger.html You may prefer to add the spots to the giraffes at the end using duplicate stitch. If you wish to do this, knit all the spot sts from the chart or written instructions in C (yellow) while you are knitting the blanket, then sew over them at the end using D (brown). This pattern was tech edited by Jo Torr. A version of this pattern was published by Willow Yarns. #VikkiBirdDesigns #VikkiBirdDesignsIntarsia #GiraffeFamilyBlanket Pick up your copy now! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** **Ravelry link. May cuase issues for people with photosensitivity, proceed with caution.
Set of two lovely 16 x 24" linen-cotton tea towels - the perfect gift for a friend or to keep for yourself! Reusable and sustainable, each set is handmade in the USA just for you. These tea towels are the workhorse of the kitchen, and whether you use them for lint-free dish drying or keeping hands dry, they’ll bring a unique splash of color and personality to your kitchen. Each 16” x 24” towel features a folded hem, white top stitching, and a subtle white hang tab on the back. They will soften and become more absorbent with use. Sold as a set of two. Etsy provides transit estimates which are auto-calculated and may not be accurate. If you are concerned about the status of your order, please don't hesitate to reach out! FABRIC OPTION ◆ Linen-Cotton - Natural linen-cotton blend with a unique natural texture and a matte finish. A great weight for lint-free dish drying and hands, these become softer and more absorbent with use. Featured Design: Hummingbirds by vikki_paul - Find more products featuring this design at our Etsy Fabric & Removable Wallpaper shop: https://www.etsy.com/shop/Spoonflower?search_query=13183153 - Find home decor featuring this design at our Etsy Home Decor shop: https://www.etsy.com/shop/Roostery?search_query=13183153 Thanks for supporting creatives! With Spoonflower, every design is crafted by an independent surface designer who receives a commission on every sale. By ordering from Spoonflower, you help an independent designer earn a living, and each order is printed, cut, and sewn on demand in the USA just for you! *Please note, while we have done our best to accurately represent this design's color, position, and scale, the finished product may be slightly different than it appears in the preview, as colors may render on a computer screen differently than they do on printed fabric.
Sold by Create your own from scratch Size: Standard Postcard Create your own vacation-worthy postcard! Any view you’ve seen, any monument you’ve fallen in love with, can all be added to your postcard with our personalization tool. Dimensions: 5.6" L x 4.25" H; qualified USPS postcard size High quality, full-color, full-bleed printing on both sides Paper Type: Matte A classic, all around paper with a natural feel and an uncoated matte finish; our Standard Matte stands the test of time. Elegant and understated, colors print softer and more subtle. 17.5 pt thickness / 120 lb weight / 324 GSM Light white, uncoated matte finish with an eggshell texture Paper is easy to write on and won't smudge Made and printed in the USA
Have you got a baby on the way? Maybe a friend or family member does? Are you looking for the perfect gift for them? The Giraffe Family Blanket might be just the thing! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** When I was little, I wanted a pet giraffe! I’ve always been tall, and when I was little I found these tallest of animals fascinating. I would have loved the Giraffe Family Baby Blanket as a small child, and this makes the perfect gift for a new baby (especially if the parents are tall!). At 91 x 71 cm (35.75 x 28 in), the blanket is sized to fit a pram, stroller, Moses basket or crib, and can also be rolled out on the floor and used as a playmat. The blanket is knitted in one piece with the giraffes being incorporated using the intarsia technique. The giraffes stand against a green grass and blue sky background, and the edge stitches of the blanket are knitted in moss stitch to prevent curling. The blanket instructions are written out in full, with both charts and written instructions for the giraffes. Ready to cast on? Pick up your copy now! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** ******** Want the technical info? Keep reading... Sizes One size: 91 x 71 cm (35.75 x 28 in) Tension 16 sts and 22 rows = 10 cm (4 in) in stocking stitch worked flat on 5.5 mm (US 9) needles after wet blocking, or size needed to obtain correct tension. Yarn Aran-weight yarn in the following colours and amounts: A (green): 125 m (140 yds); B (pale blue): 520 m (570 yds); C (yellow): 115 m (130 yds); D (brown): 40 m (45 yds); E (black): 5 m (10 yds) The yardages given are enough to knit the grass, sky, and yellow portion of the giraffes, then add the spots and faces using duplicate stitch. If you knit the whole blanket using intarsia, you will find you need less yellow than stated. I would recommend using an acrylic, wool, or wool/acrylic blend yarn with plied structure and good stitch definition. If you are making the blanket for a baby, you may wish to consider using a machine washable yarn to make the blanket easy to care for. Needles 5 mm (US 8) circular needle at least 80 cm (32 in) in length; 5.5 mm (US 9) circular needle at least 80 cm (32 in) in length Notions Stitch markers x 4; Bobbins for holding the different yarn colours during colourwork; Chart row marker; Tapestry needle Pattern notes The sample is knitted in Stylecraft Special Aran (aran, 196 m per 100 g ball, 100% acrylic) in Meadow 1065 (A), Cloud Blue 1019 (B), Saffron 1081 (C), Mocha 1064 (D) and Black 1002 (E). Weave your ends into regions of the same colour to avoid show-through. Weave in your ends every 10 or so rows to avoid having to do them all at the end. When working from the chart, odd numbered rows should be worked right to left, and even numbered rows should be worked from left to right. If you find that printing the chart on A4 paper is too small to easily read, you can find a few solutions in this blog post: https://www.vikkibirddesigns.com/2021/10/making-knitting-charts-larger.html You may prefer to add the spots to the giraffes at the end using duplicate stitch. If you wish to do this, knit all the spot sts from the chart or written instructions in C (yellow) while you are knitting the blanket, then sew over them at the end using D (brown). This pattern was tech edited by Jo Torr. A version of this pattern was published by Willow Yarns. #VikkiBirdDesigns #VikkiBirdDesignsIntarsia #GiraffeFamilyBlanket Pick up your copy now! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** **Ravelry link. May cuase issues for people with photosensitivity, proceed with caution.
Home of Vikki Bird Designs: cheerful knitting patterns for babies and children.
Hello! I hope this post finds you well. After the 'mini beast from the East' at the weekend (does that make anyone else think there might have been a ladybird invasion? Rest assured, it was just a bit more snow), it finally feels like spring might be on its way – there's a possibility that I might be able to leave the house without a coat on this afternoon! I have two new patterns to share with you today, both from the latest issue of Knit Now magazine (Issue 86), which is goes on sale today. This issue of Knit Now magazine is the annual British issue, which celebrates British yarns and British designers – every pattern featured in the magazine is designed by a British designer, and every yarn featured has a strong British link, whether it is fully manufactured in Britain or is produced by a British company. First up we have a pattern that I have been itching to share with you for ages: the Paddington jumper. Paddington Bear, a bear who travels from Peru to London in search of a new life and new adventures, is one of my childhood favourites and one that has a different incarnation for each new generation: for me it was the books and television series, while for the latest generation it is the Paddington movies (Paddington 2 was out at the end of last year, and is excellent). I was delighted when I was asked by Knit Now to design a jumper featuring the famous bear and this is what I came up with: Paddington in his classic duffle coat and hat, carrying his suitcase. The jumper is knitted in DK weight yarn (Patons Merino Extrafine DK*), and sized to fit ages 2–10. The jumper is knitted in pieces from the bottom up with the Paddington motif incorporated using the intarsia technique. The neckline is knitted on in the round after the shoulders have been seamed. Extra detailing is added at the end using embroidery. My second pattern in this issue of Knit Now is the Tessellate baby blanket. Unusually for me, this pattern is completely suitable for beginners. All you need to be able to do is knit garter stitch, work simple increases and decreases, and pick up stitches! The blanket is a bold, high contrast design, inspired by patchwork and quilting. The blanket features a strong geometric design created using simple two colour squares that are knitted on the diagonal. The squares are sewn together at the end and finished with a border in a contrast colour. The Tessellate baby blanket is knitted in Three Bears Yarn Affection 100% Cotton Aran, which is spun in Lancashire by English Fine Cottons. Issue 86 of Knit Now magazine is available now from newsagents and supermarkets in the UK. Copies may also be purchased from MoreMags. Please note that the pattern for the Paddington jumper is only included in UK editions, not digital or international editions. As ever, I would love to see if you knit any of my designs. The easiest way to share is to create a project page on Ravelry,** or to post a photo on Instagram and tag me (@vikkibirddesigns). Happy knitting! *Affiliate link. **Ravelry is a forum for fibre crafts. Membership is free. All images copyright Practical Publishing.
Unicorns are currently everywhere, and this is my cheerful take on the trend. The cushion, featuring the silhouette of a unicorn’s head, is knitted in a bright rainbow palette of self-striping yarn. The unicorn motif is added using a combination of intarsia and stranded colourwork in order to maintain the stripe pattern across the whole unicorn head. If you can’t get hold of any rainbow striped yarn, of course you could work the unicorn head in a single colour, or devise your own stripe sequence and use several balls of yarn.The cushion is 43 cm (17.25 in) square, designed to fit an 46 cm (18 in) square cushion pad with 3 cm negative ease. The cushion is knitted in one piece and fastened with six 18mm (0.75 in) buttons across the back on a ribbed button band. Half the back is knitted, then the front, then the second half of the back and the side seams are then stitched.Instructions for the intarsia section are provided both as a chart and as written instructions.
The easiest way to follow your favorite blogs
Beautiful fabric Pigeon brooch intricately embroidered by Vikki Lafford Garside. Measurements approximately 4.5cm (w) x 7cm (h) x 1cm (D) See more pieces available by Vikki Lafford Garside About Vikki Lafford Garside Like many young girls, I dreamt of being a princess in a fairy tale, with sparkling crystal slippers and beautiful, flowing gowns of the most sumptuous fabrics, adorned with exquisite embroidery and embellishment. I imagined a world of fairies and woodland creatures inhabiting the gloomy depths of the Cotswold Countryside in which I spent my childhood. My love of detail and embellishment was always a huge inspiration for my work and it led me to achieve a degree in Embroidery in 2002, followed by a Masters Degree in Textile Design at Chelsea College of Art and Design. There I created my first collection of dresses based on old versions of popular fairy tales. Now working as a designer-maker I am still inspired by the fairy tales, folklore and nature I appreciated as a child. I mix traditional hand stitch and hand painting with innovative techniques of stitch, print and heat manipulation to create feminine, hand crafted dresses and accessories. My fashion accessories collection features individually hand crafted brooches and clips in luxury fabrics, adorned with intricate embroidery, Japanese glass beads, Swarovski crystals and freshwater pearls.
Do you have a skein of variegated yarn that seems to dominate every pattern you try with it? My latest pattern, Voices from the Deep is the perfect pattern choice! Cables often disappear into variegated yarns, but if you introduce slipped stitches into the cables, the cables sit on top of the background, making the cables pop against the yarn. The Voices from the Deep Socks feature a cable that flows intuitively from the ribbing, and the emergence of the cable against the background makes this a moreish ‘just one more row’ pattern, hence the name Voices from the Deep, after the Sirens who were said to call sailors irresistibly to the rocks just below the surface of the water. I've worked with Castleview Yarns on this pattern - Jen supplied me with a beautiful skein of her Castleview Yarns Sock (4-ply, 425 m per 100 g skein, 75% superwash merino, 25% nylon) in Agnes, which has a neutral base heavily speckled in shades of purple (my favourite colour). The yarn and the pattern work together so the cable is visible even with all the speckles. The Voices from the Deep Socks are knitted from the toe up. The socks are knitted as far as the heel, then a row is knitted in waste yarn so the socks can be opened up and an afterthought heel added at the end. Never knitted an afterthought heel before? Don't worry, the pattern contains all the information you need. Each sock features a cable up the side of the foot; this cable is mirrored between the two socks (I've even colour-coded the charts so those for the left sock have BLUE borders, while those for the right have RED borders - just remember R for red and right and you'll be on your way!), and the cable flows seamlessly into the ribbing, which is a feature I love to include. Want to get your hands on the pattern? You can find it on Ravelry* and PayHip. Use the code VOICES to get 15% off, expires 11.59pm GMT, Wednesday 30th November 2022. The code is also valid on my other Siren patterns: Siren Song, Three Sirens (Ravelry link;* PayHip link. Perfect if you have lots of single skeins in your yarn collection! Full pattern details can be found here. *Ravelry link. May affect people with photosensitivity, proceed with caution.
Brand New 1 Pc metal cutting dies. This set includes 5 birds sitting on a branch. You could cut this design from white cardstock and color each bird a different color Compatible with most leading die cutting machines. This listing is for one 1 pc metal cutting die and it measure 3" x 1.5" Happy Crafting Vikki Please check out my other Etsy shop at: Vinylmeethis.etsy.com
Have you got a baby on the way? Maybe a friend or family member does? Are you looking for the perfect gift for them? The Giraffe Family Blanket might be just the thing! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** When I was little, I wanted a pet giraffe! I’ve always been tall, and when I was little I found these tallest of animals fascinating. I would have loved the Giraffe Family Baby Blanket as a small child, and this makes the perfect gift for a new baby (especially if the parents are tall!). At 91 x 71 cm (35.75 x 28 in), the blanket is sized to fit a pram, stroller, Moses basket or crib, and can also be rolled out on the floor and used as a playmat. The blanket is knitted in one piece with the giraffes being incorporated using the intarsia technique. The giraffes stand against a green grass and blue sky background, and the edge stitches of the blanket are knitted in moss stitch to prevent curling. The blanket instructions are written out in full, with both charts and written instructions for the giraffes. Ready to cast on? Pick up your copy now! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** ******** Want the technical info? Keep reading... Sizes One size: 91 x 71 cm (35.75 x 28 in) Tension 16 sts and 22 rows = 10 cm (4 in) in stocking stitch worked flat on 5.5 mm (US 9) needles after wet blocking, or size needed to obtain correct tension. Yarn Aran-weight yarn in the following colours and amounts: A (green): 125 m (140 yds); B (pale blue): 520 m (570 yds); C (yellow): 115 m (130 yds); D (brown): 40 m (45 yds); E (black): 5 m (10 yds) The yardages given are enough to knit the grass, sky, and yellow portion of the giraffes, then add the spots and faces using duplicate stitch. If you knit the whole blanket using intarsia, you will find you need less yellow than stated. I would recommend using an acrylic, wool, or wool/acrylic blend yarn with plied structure and good stitch definition. If you are making the blanket for a baby, you may wish to consider using a machine washable yarn to make the blanket easy to care for. Needles 5 mm (US 8) circular needle at least 80 cm (32 in) in length; 5.5 mm (US 9) circular needle at least 80 cm (32 in) in length Notions Stitch markers x 4; Bobbins for holding the different yarn colours during colourwork; Chart row marker; Tapestry needle Pattern notes The sample is knitted in Stylecraft Special Aran (aran, 196 m per 100 g ball, 100% acrylic) in Meadow 1065 (A), Cloud Blue 1019 (B), Saffron 1081 (C), Mocha 1064 (D) and Black 1002 (E). Weave your ends into regions of the same colour to avoid show-through. Weave in your ends every 10 or so rows to avoid having to do them all at the end. When working from the chart, odd numbered rows should be worked right to left, and even numbered rows should be worked from left to right. If you find that printing the chart on A4 paper is too small to easily read, you can find a few solutions in this blog post: https://www.vikkibirddesigns.com/2021/10/making-knitting-charts-larger.html You may prefer to add the spots to the giraffes at the end using duplicate stitch. If you wish to do this, knit all the spot sts from the chart or written instructions in C (yellow) while you are knitting the blanket, then sew over them at the end using D (brown). This pattern was tech edited by Jo Torr. A version of this pattern was published by Willow Yarns. #VikkiBirdDesigns #VikkiBirdDesignsIntarsia #GiraffeFamilyBlanket Pick up your copy now! PayHip: https://payhip.com/b/TSXPt Ravelry: https://www.ravelry.com/patterns/library/giraffe-family-baby-blanket** **Ravelry link. May cuase issues for people with photosensitivity, proceed with caution.
Originals available at my shop: www.etsy.com/shop/vikkichu
Found materials like mushrooms, pine cones, and branches make little foraged fairy houses so realistic looking, you would think they were made by fairies.