Join me for today's Folio Flip Album Tutorial where I share how I created this cute Folio with Recollections card stock and Colorbox paper.

Hello, Graphic 45 Fans! It is time to share another Graphic 45 project with you! I had such fun playing with the NEW Lost in Paradise collection a few weeks ago (see the project HERE) that I decided to dip into the papers again, along with some other (retired) collections, and make a mini album! This chunky monkey mini is 6 1/4" x 6 1/4" x 2 1/2" in size! It is a nice, square, chubby book! I confess, I was a bit afraid of all the color and print in this paper collection. I finally had to throw caution to the wind and EMBRACE the vibrant colors and just create! There are six pages inside the book, plus a waterfall inside the front cover and a big pocket inside the back cover. This book is jam-packed with pull outs, flip ups, tags, and more! I have used four collections for this mini, but don't let that scare you! There is plenty of paper in one collection, if you have the 12x12 collection pack and the 12x12 patterns and solids pad, to make this book. If you add in and 8x8 pad and a package of ephemera cards, you will be all set! I have used: Lost in Paradise, Tropical Travelogue (I used the original, but you can use the Deluxe Collector's Edition), Nature Sketchbook, and Safari Adventure. You may be able to find Nature Sketchbook or Safari Adventure on Ebay, but they are both retired. To see all the pages and inside content, please view the video below. For the tutorial, keep reading. I have a photo tutorial to explain how to create the album base, plus a few tips for decorating. Also, I have used a different hinge mechanism than the one I usually use. I have been finding that the old hinge piece is not always working the way I wish. So, I tried something else this time. See the directions below. Start off with three pieces of heavy to medium weight chipboard. Cut two pieces for the covers to 6 1/4" x 6 1/4". Cut the spine piece to 6 1/4" x 2 1/2". Splice together black cardstock to make a piece that measures 8 1/4" tall and 17 1/2" wide. Place your chipboard pieces onto the cardstock, with a one-inch border all the way around. Make sure to space your spine chipboard piece approximately 1/4" from the cover pieces to allow the album to open and close without cracking the cardstock. Cut the corners of the cardstock an an angle, as shown. Add double-sided adhesive to the tabs. Then wrap your cardstock around the chipboard to give a finished edge. The book will have six pages (12 sides). To make the hinges, cut six pieces of heavy weight black cardstock to 6 1/8" x 1". (I used 110# cardstock.) Score each in half, fold and burnish. (Only five hinges are shown above, but please make six. One of my hinges was in the book before I thought to snap a photo!) Place double-sided adhesive on one side of each score line, as shown. To add your first hinge, line the fold of the hinge piece up with the very edge of the spine chipboard piece, with the fold on the LEFT. The 1/2" hinge will stick up, and the 1/2" gutter will be attached, as shown. For the second hinge, place the fold to the RIGHT and overlap the gutter from hinge number one. The gutter for hinge number two will be up against hinge one, as shown. For hinges three through six, make sure the fold is to the RIGHT. The gutter for each hinge should be placed up against each previous hinge, as shown. There should be a 1/2" gutter between each hinge. For hinge number six, line up the fold of the hinge piece with the very edge of the spine chipboard piece, with the fold on the RIGHT. This is what your project should look like so far. The six hinges will cover the spine piece. Each hinge is 1/2" high and there is a 1/2" gutter between each hinge. Cut five strips of decorative paper to 6" x 3/8" and sponge the edges with Abandoned Coral Distress ink. Attach one paper strip to each hinge gutter, as shown. Fold the hinges back and forth to make them more flexible. You can see in the photo above the gap between the spine and the cover chipboard pieces. I like to reinforce that and with the old hinge system, the space was always covered. With this type of hinge, we need to add a covering piece to the front and back inside covers to reinforce the gap. (This is optional and personal preference.) Cut two pieces of black cardstock (use weight 65#-80#) to 6 1/8" x 1 1/2". Score both pieces at 1/2" and add double-sided adhesive to the 1/2" tab. Place the 1/2" section on top of the first hinge to secure it in place (this will make the first hinge a double thickness). Once the piece is attached to the hinge, glue the 1" section to the inside front cover. Burnish and gently score the spine gap. Repeat with the last hinge and back inside cover. Trim two pieces of decorative paper to 6 1/8" x 6 1/8" and attach to the inside covers. (Sponge all papers for this project with the Abandoned Coral Distress Ink or Decades Rustic Orange, if desired.) To create the waterfall section on the front cover, cut six panels from black cardstock to 3 5/8" tall by 4 1/8" wide. Score on the longer side at 1/2". Round the corners opposite your score lines. Fold on the score lines, making sure to fold the 1/2" tab to the back of the panel. Place double-sided adhesive onto the resulting 1/2" tabs. Start at the top edge of the cover and add your panels. Line up the first panel with the top edge of the cover, in the center. Continue to attach the panels, lining up the folded edge of each panel to the bottom edge of the tab of each previous panel. Trim thin strips of paper to place over each tab, covering the black cardstock. These strips are approximately 3/8" x 4". Place a magnet onto the bottom center of the top waterfall panel. To see all the pages of the waterfall, view the video linked above. Cut a strip of cardstock to 4 1/2" x 1" and wrap it from the bottom of the cover up to the top waterfall panel. (I managed to slide my strip under the paper attached to the inside front cover.) Add a magnet to the strip. The magnet will line up with the magnet you placed on the first panel. This will also help your waterfall to stay neat and tidy. Cut decorative paper to cover both sides of the strip. Add an embellishment to the top, if desired. Add ephemera cards and decorative paper to each panel. The papers are cut to 3" x 4". Round the corners, as shown. Let's add the pages to the mini. I like to add my pages first, and then decorate them. I have fewer mishaps if I do it this way! Trim six pieces of heavy weight black cardstock to 6 1/8" x 6 1/8". Round the corners on one side of each page. Place adhesive on the left side of each hinge. Attach a page to each hinge. Trim decorative paper for each page. Each decorative panel should measure 6" x 6". You will need twelve (12) pieces. Once you have paper on all the panels, you can decorate as desired. Inside front cover and page one. The ATC tags make great tuck spots. The photo booklet on page one is 4 1/8" x 8 1/4" black cardstock, folded in half. Decorative paper folded inside and held with twine makes a fun place for some journaling. Pages two and three. Here is a wonderful example of the Lost in Paradise Collection working together perfectly with the older collections! The pocket on page two measures 6 1/8" x 3", which means you need to cut your cardstock to 7 1/8" x 3 1/2" and score on three sides at 1/2" to make the pocket tabs. Fussy cut images, popped up with foam tape, make great pockets and tuck spots! Pages four and five. The Graphic 45 tags and tag dies are prefect for this style of project. To create the band on page four, cut a border strip from the decorative paper, and attach on either edge with foam adhesive. Use a chipboard element as a "stopper" to keep the little accordion mini from sliding out of the book. The angled pocket on page five is easy to make. Cut a square of cardstock to 6" x 6" and cut it in half diagonally. Set one of the resulting triangles aside. Score the triangle on the two 90 degree edges at 1/2" to make the pocket tabs. Attach the pocket to the page. To make the booklet, trim black cardstock to 4 1/8" tall. Then splice pieces together to make a length of 15 1/8". Score every 3 1/8" to create five panels that are 4 1/8" x 3 1/8" each. The 4" x 3" ephemera cards are perfect for this accordion fold booklet. Lots of space for journaling! To see close-ups and the other side...you guessed it, view the video! Pages six and seven.Tuck spots and fold outs, oh my! Use an ATC tag as a tuck spot on page six. To create the flip-out piece on page seven, trim black cardstock to 10 1/4" x 5". Score at 3" and 7". Glue the center section to the center of page seven. Pages eight and nine. Photo booklets are a great addition to any album. And these sweet butterflies make great tuck spots for an ephemera card! The photo booklet on page eight is 4 1/8" x 8 1/4" black cardstock, folded in half. For page nine, fussy cut butterflies and pop them up on the page to create tuck spots. Pages ten and eleven. A riot of color! The pocket on page ten measures 6 1/8" x 3", which means you need to cut your cardstock to 7 1/8" x 3 1/2" and score on three sides at 1/2" to make the pocket tabs. On page eleven, a chipboard element makes a great tuck spot for another photo booklet. Page twelve and the back cover. Use a chipboard element for a tuck spot on page twelve. For the inside back cover, create a large pocket, as shown. Trim black cardstock to 7 1/4" x 4 1/2". Score on three sides at 1/2" from the edges. Fold the tabs, then add adhesive to the tabs and attach the pocket to the inside back cover as shown. Trim decorative cardstock to 6" x 3 7/8" and attach to the pocket. Use a circle punch to cut a notch on pocket edge. Decorate the pocket and place tags or other items into the pocket. (Too see all the tags for this project, view the video linked above.) I always decorate my front cover LAST. I am pretty rough on the covers while I am decorating the inside, so I like to save the covers until the end. Use a section of the Lost in Paradise Signature Sheet for the front cover. You need to cut a piece that is just slightly smaller than 6 1/4" x 6 1/4". I cut a piece of computer paper to size, and used that as a template to select the portion of the signature sheet that I wanted. This step saves wasting paper with false cuts! I fussy cut two postage images and popped them up on a few pieces of scrap chipboard to give the upper left corner of the cover some interest. I fussy cut lots of flowers, a bird, and a butterfly from the various papers and then layered them in the lower left corner of the cover. I added a few Matte Pearl Gems to the flower centers. The cover is fairly simple, but very striking with all that lovely paper. Cut paper for the spine and back cover and attach. I added a chipboard piece and more pearl gems to the spine. I used ombre sheer ribbon throughout the book. I used a yellow/pink ombre and a yellow/parrot green ombre. (Really Reasonable Ribbon has some lovely Sheer Ombre Ribbons.) I love seeing the ribbon peek out around the edges! Thanks for joining me today! Graphic 45 Supply List: Lost in Paradise Collection12x12 Paper Collection 12x12 Patters and Solids Pad Chipboard Tags and Pockets Stickers Ephemera Cards Tropical Travelogue Collection (original) 12x12 Paper Pad 8x8 Paper Pad Chipboard Nature Sketchbook Collection 12x12 Paper Pad 6x6 Patterns and Solids Pad Chipboard Ephemera Cards Safari Adventure Collection 12x12 Paper Pad 8x8 Paper Pad Staples Embellishments Matte Pearl Gems (black) Regular Tags - Black Square Tags - Black Artist Trading Tags - Black Large Tag, ATC Tag and Flower Dies Regular Tag and Gears Dies Square Tag and Clock Dies Other Supplies: Cardstock: WorldWin Papers Black, Recollections Black (110#) Twine and ribbon: Really Reasonable Ribbon Burlap String (black, orange, natural), Sheer Ombre Ribbon (yellow/pink, yellow/parrot green) Magnets: Basic Grey Ink: Ranger Distress Abandoned Coral Dies: My Favorite Things Stitch Mini Scallop Stax, Stitch Square Scallop Frame; Spellbinders Butterflies Circles Tools: Kadumaru Pro corner rounder, Provocraft deco scissors (postage stamp edge), foam mat, stylus, sharp scissors Adhesive: white glue, ATG tape, Scrapbook Adhesives by 3L 3D Foam Squares, hot glue, Scor-tape

Good morning, Crafters! I have a sweet, summertime tutorial for you today! If you are trapped inside with the air conditioning roaring, then it's the perfect time to whip up this little cutie! My monthly mini showcases the Authentique Summertime Collection! This is the perfect collection for these hot, humid, end-of-summer days! This summer collection comes with six different sheets and 12 patterns, However, the collection has TWO sheets of cut-aparts, Summertime Five and Summertime Six. If you purchase the paper pad, you get four of each pattern. That is plenty of paper to make this mini album! This mini is 5" tall and 3 1/2" wide (similar to the Meadow Mini Album, shared HERE). There are three pages, with lots of fold-outs and flaps, plus TWO waterfall sections! Let's get started on the tutorial. Cut two pieces of medium weight chipboard to 5" x 3 1/2". Cut one piece of chipboard to 5" x 1". Trim dark blue cardstock to 7" x 10 1/4" and attach the chipboard pieces to the cardstock as shown above. Make sure to maintain a 1/8" gap between the spine piece and the cover pieces of chipboard. Trim the cardstock corners at an angle and attach double-sided adhesive to the tabs. Wrap the chipboard as shown. Gently fold the covers while scoring in the 1/8" gutter (or channel) between the spine and the covers. Trim decorative paper to fit over the center spine section. Do this BEFORE adding your hinge mechanism. DO NOT add paper to your inside covers until AFTER you add your hinge mechanism. Create a hinge mechanism from dark blue cardstock. Cut the cardstock to 4 1/4" x 4 1/2". (The 4 1/4" measurement is the height of the hinge.) Score on the longer side at: 1", 1 1/8", 1 3/8", 1 5/8", 2", 2 1/4", 2 1/2", 2 7/8", 3 1/8", 3 3/8", 3 1/2". This will make three hinges that are 1/4" all with a 3/8" space between hinges. Attach the hinge to the spine of the book. Line up the scored 1/8" "gutters" on your hinge to the gutters on your album. Gently burnish and fold all your score lines. Trim decorative paper to add to the inside of your covers. Trim three pieces of dark blue cardstock to 4 7/8" x 3 3/8" and add one piece to each hinge. Glue these "base pages" to the left side of each hinge. (Don't worry. Your decorative papers will cover the other side of the hinge.) Create a waterfall section for the front cover. Trim the dark blue cardstock to 4" x 3 1/8". Score each piece at 1/4" from the top edge. Use a corner rounder to round the bottom edges. Cut four waterfall pages. Attach the first to the top edge of the dotted paper by the 1/4" tab. Add each waterfall page just under the previous page. Add magnets to keep the waterfall closed. Cut a piece of dark blue cardstock to 4 7/8" x 3 3/8" and score on the long side at 1/4" from the right edge. Round the left-hand corners. Attach the 1/4" tab to the left edge of the first base page. Cut a second piece of dark blue cardstock to 4 7/8" x 3 3/8" and score on the long side at 1/4" from the left edge. Round the right-hand corners. Attach the 1/4" tab to the right edge of the first base page. Add magnets as desired. Close the left flap, then the right flap to finish the first base page. Turn the page and work on the BACK of the first base page. Cut a piece of dark blue cardstock to 4 5/8" x 3 1/8" and score on the bottom at 1/4" from the edge. Round the top corners. Attach the 1/4" tab to the bottom edge of the BACK of the first base page. Add a pocket to the bottom of the second base page. Cut dark blue cardstock to 2 3/4" x 3 7/8" and score on three sides at 1/4" from the edges. Fold on the score lines and attach the pocket to the page as shown. Flip the second base page over and work on the BACK. Cut a piece of dark blue cardstock to 4 7/8" x 5 1/2" and score on the long side at 2" and 5 1/4" from the left edge. Round the left-hand corners. Attach the 1/4" tab to the left edge of the second base page. Cut a second piece of dark blue cardstock to 4 7/8" x 3 3/8" and score on the long side at 1/4" from the left edge. Round the right-hand corners. Attach the 1/4" tab to the right edge of the second base page. Add magnets as desired. Close the right flap, then the accordion fold the left flap to finish the second base page Add a pocket to the bottom of the THIRD base page. Cut dark blue cardstock to 2 3/4" x 3 7/8" and score on three sides at 1/4" from the edges. Fold on the score lines and attach the pocket to the page as shown. Flop the page and work on the BACK of the last page. Cut a piece of dark blue cardstock to 4 7/8" x 3 3/8" and score on the long side at 1/4" from the right edge. Round the left-hand corners. Attach the 1/4" tab to the left edge of the third base page. Cut a second piece of dark blue cardstock to 4 7/8" x 3 3/8" and score on the long side at 1/4" from the left edge. Round the right-hand corners. Attach the flap to the right edge of the first base page. Add magnets as desired. Close the left flap to finish the last base page. Create a waterfall section for the inside back cover. Trim the dark blue cardstock to 4" x 3 1/8". Score each piece at 1/4" from the top edge. Use a corner rounder to round the bottom edges. Cut four waterfall pages. Attach the first to the top edge of the dotted paper by the 1/4" tab. Add each waterfall page just under the previous. Add magnets to keep the waterfall closed. Now your mini book is ready to decorate! I trimmed a piece of white, adhesive-back canvas to cover the spine of my book. Then, I added the yellow and white dotted paper to the front and back covers. I kept the cover simple by adding a word grid sticker and a bit of pretty ribbon. (The sticker is VERY OLD and I have no idea where it's from!) I double-matted the sticker and added it to a bit of scrap chipboard before gluing it to the cover. I found the cute crab button in my stash and thought he would like to end his days decorating the bow! I used a banner die to cut out the spine decor. I used a Tim Holtz brad to dangle some charms from the spine. (I have a bin of charms and a bin of beads, most of which have been with me since the early 1990's! I add to them from time to time, so I really don't remember where these particular items came from!) I added the fun Summertime papers to the inside sections of my book, and then just added a few stickers and other bits and bobs to decorate each page. The Summertime cut-aparts are the perfect size for my pages... and to fit into the pockets! I have no idea how long I've had some of these stickers! I almost never reach for stickers, but I am happy I still had these in my stash as they worked perfectly for this little book! I found clear stickers, and 3-D sticker, and word art...just a treasure trove! With TWO waterfall features, there is a lot of space for photos and journaling! If you want to see each page, watch my little walk-through video below! I hope you are inspired to beat the heat and make a little end-of-summer mini! Thanks for joining me today! Authentique Supplies Used: Summertime 12x12 Paper Pad Additional Supplies: Adhesive-back canvas: Claudine Helmuth Studio Cardstock: WorldWin ColorMates Textured Twill Navy, Neenah Desert Sand Ribbon: Really Reasonable Ribbon Navy Satin with Stitched Center (similar) Buttons, beads, charms: craft and jewelry supply Ring fastener: Tim Holtz Stickers: various Dies: My Favorite Things Fishtail Stax and Layers Corner rounder: Kadomaru Pro Score board: Martha Stewart Chipboard: Grafix Adhesive: Scor-tape, ATG tape, white glue

Hello dear visitors! I'm excited to share another mini album I created using gorgeous Graphic 45 papers "Craft Reflections". It's not a new collection and I have had it for a long time in my stash. I thought it was perfect for a vintage style mini album like the one I'm showing you today. The album's dimensions are 5 1/4" X 6 5/8", the spine is 3". It has 8 pocket pages and I used envelopes (standard size 6.5" X 4.5") for creating the base for them. I also used quite a few of Tim Holtz & Sizzix dies, I think they are perfect for the vintage style projects. You can find the guidelines for creating the album, including the measurements and the list of the dies in the YouTube video which I've posted on my channel here. Drop me a comment if you have a question. I have a short video tutorial on making these tag pockets using the Stampin' Up Tag Topper Punch. You can find a walk-through for this mini album on my You Tube channel here: Thanks for watching a have a great weekend! Hugs, Alexandra

Find out how to make a creative one page wonder interactive mini album with pockets and flaps for extra room for photos

Hello everyone! Today I have another mini album to show you. I have named this my *hairpin* album. That's because the pages are held in...

The best way to make a flap mini abum page to make your mini album much more fun and intereating and add extra space for photos and journaling

Lately I have been making more mini albums than layouts! It’s been a fun change of pace and just what I needed to keep the creativity flowing. It all started when I was asked to make a mini album for the Make It Mini column of the Summer 2017 issue of Scrapbook & Cards Today [...]

I thoroughly enjoyed making this project and love how pretty the album and the suitcase turned out. Here are the tutorials on how they all went together.

My Creative Scrapbook design team member Kristin Greenwood is up today with a tutorial featuring our November Album Kit ! Here's Krist...

Découvrez notre nouveau thème sur les émotions…

Discover the joy of creating stunning mini albums with these fun project ideas from Scrapbook.com. From pocket-sized scrapbooks to themed albums, get inspired and start crafting today.

Hello friends, today I’m sharing my first December Daily Album! I’ve wanted to do one of these for a while now, I didn’t manage it last year, so, I’ve made sure to plan it i…

Bonjour à tous ! Ravie de vous retrouver aujourd'hui avec un nouveau tutoriel ! Il s'agit cette fois-ci d'un mini album un peu particulier de part son contenu, car il retrace l'aménagement déco de notre nouvelle maison ! Pour cela j'ai utilisé la uniquement...

How to make a one sheet wonder mini album! Make a complete mini album with cover from only one 12x12 sheet of cardstock

Guten Morgen! Wir haben heute wieder SUper-Sonntag! Wir zeigen dir heute ein Mini-Album. Dafür hat uns heute die Helke eine Anleitung bereit gestellt. Diese kannst du dir hier herunterladen. Die Anleitung von der Helke kam mir sehr gelegen. Am Ostermontag waren wir nämlich beim traumhaften Wetter im Kölner Zoo. Also habe ich nun einige Bilder, die in einem Album verstaut werden wollen.Und ich hatte auch direkt eine Idee mit welchen Produkten ich das Mini-Album machen wollte. Natürlich hatte ich die Produktreihe Jetzt wird‘s wild im Kopf. Ich entschied mich auch schnell für Savanne als Grundfarbe und machte mich an die erste Seite. Nach dem ich diese fertig hatte, bekam ich Lust auf mehr. Nach der fünften Seite musste ich mich dann doch bremsen und machte mich an die Deko bzw. an das Cover. Als Hintergrund verwendete ich das Muster in Limette der Designerpapiers Jetzt wird‘s wild und kombinierte dieses mit dem Farbkarton Limette. Ich stanzte mir eine Sonne mit der Handstanze in Curry-Gelb und schnitt mir ein paar Tiere aus dem Designerpapier aus. Dann fügte ich noch ein paar Holzakzente aus der Produktreihe sowie ein wenig Blätterband hinzu und schon war das Cover fertig. Wenn du eine Inspiration für das Cover benötigst, kann ich dir ebenfalls ein Video von Ginger empfehlen. Für die Deko der Seiten verwendete ich hauptsächlich das Designerpapier. Das Stempelset, dass übrigens auch in den neuen Jahreskatalog übergeht, kam eigentlich nur für den Spruch auf dem Cover zum Einsatz. Und weil mir das Mini-Album so viel Spaß gemacht hat und ich dich natürlich zum Nachahmen motivieren und inspirieren möchte, habe ich für dich noch ein kleines Video gedreht: https://youtu.be/YcwS4OX1rjI