TPA3122D2 IC is used as a class D audio amplifier and can deliver up to 15W of power at 10% distortions. The real advantage of using a class D amp,
Here is a powerful and easy class D amplifier to achieve. This is the simplest version that can offer for an amp of this power, ideal u...
High-fidelity sound and powerful performance in a compact design Versatile low pass and high pass filters for precise audio tuning Robust signal-to-noise ratio ensuring clear and crisp sound High damping factor for superior sound quality Designed for audiophiles seeking premium audio performance Deaf Bonce MMA-2200D 2 Channel Class D 600 Watt Amplifier - Machete Series Introducing the Deaf Bonce MMA-2200D Amplifier from the Machete Series, a powerhouse of performance in a compact design. This 2 Channel Class D amplifier delivers robust, high-fidelity sound for an unparalleled audio experience. This Listing Includes: (1) Deaf Bonce MMA-2200D Amplifier (2) Internal Fuses Specifications: Model: MMA-2200D Class: D Number of Channels: 2 Frequency Response: 10-22000 Hz 2 Ohm RMS Power (14.4 V): 300 W x 2 4 Ohm RMS Power (14.4 V): 200 W x 2 4 Ohm RMS Power (Bridge): 600 W x 1 Minimum Permissible Load on the Channel: None Ohm Input SPL: 0.2 - 6 V Low Pass Filter: 50-500 Hz High Pass Filter: 50-500 Hz Crossover: 12 dB/Oct Bass Frequency Adjustment: 45 Hz Damping Factor: â 150 Working Voltage: 9 - 15 V Signal-to-Noise Ratio: > 90 dB Internal Fuse: 40 A x 2 Measurements: Product: Length: 9.2" Width: 5.2" Height: 1.85" Weight: 3.70 lbs Package: Length: 12" Width: 6.75" Height: 3.25" Weight: 4.40 lbs
In this post, I will share the circuit scheme and PCB layout of the Power Amplifier Subwoofer that uses the TPA3116D2 IC, TPA3116D2 is an...
Dynaudio LYD 48 3-Way Midfield Monitor, Right, White/Black This 3-way near- to midfield monitor reaches eyebrow-raising levels of accuracy thanks to a new soft-dome tweeter and Dynaudio’s proprietary MSP midrange driver and woofer. Each driver is fuelled by a powerful, state-of-the-art Class-D amplifier and a full 24-bit/96kHz signal path. And, like the rest of the LYD range, it lets you fine-tune low frequency response, position and sound-balance using cutting-edge DSP. Technical Specifications Max SPL (1m, pair) 112dB Principle Bass reflex Crossover Frequencies 460Hz / 5.5kHz Tweeter 1in soft dome Midrange 4in Woofer 8in Dimensions (W x H x D) 369 x 234 x 328mm Weight 12kg Sensitivity (85dB @ 1m, free field) +6dB: 50mV 0dB: 100 mV -6dB: 200 mV Power (Tweeter/Midrange/Woofer) 50W/50W/80W Type Class D Power consumption standby <0.5W Power consumption max. 100W Input voltage 90 - 264V AC, 50 - 60Hz Inputs XLR balanced/RCA unbalanced Outputs N/A Frequency response -6dB limits Bass extension +10Hz: 60Hz - 21kHz Bass extension 0Hz: 50Hz - 21kHz Bass extension -10Hz: 40Hz - 21kHz Free field frequency response 50Hz - 19kHz Frequency response -10dB limits Bass extension +10Hz: 52Hz - 24kHz Bass extension 0Hz: 42Hz - 24kHz Bass extension -10Hz: 32Hz - 24kHz
Cerwin Vega CVP1200.4D 4-Channel 1200W Bridgeable Class D Amplifier The Cerwin-Vega Mobile Performance Series of products makes owning a Cerwin-Vega Mobile sound system very affordable for those that are budget-conscious. And with this 1,200 Watt Max 4 Channel Class D Amp, you can enjoy the LOUD sound experience at the right price and with the right power! Cerwin-Vega Mobile amplifiers are powerful enough to drive even the most inefficient speakers and bring out their full performance capabilities to dramatic levels of clean, distortion-free sound. All Cerwin-Vega Mobile amplifiers are tested and validated by an outside third-party audio lab that measures and analyzes audio electronics to ensure precise power measurements and follows standards and practices set forth by CTA (Consumer Technology Association). General Features: Cerwin Vega CVP1200.4D CVP Series 4-Channel Class D 1 Ohm Stable Amplifier RMS Power Rating: 150 Watts x 4 @ 2Ω 100 Watts x 4 @ 4Ω Total RMS power output: 600 Watts Total Peak power output: 1200 Watts Class-D Circuitry 2-Ohm Stereo, 4-Ohm Bridged Full Range Operation Handles HI and LO level input to 12V Direct Short, Thermal, & Overload Circuits Protect Amplifier 200mV-6V High Level or Low-Level RCA Input Variable 12dB High, Low, & Subsonic Crossovers Fuse - 25 amp x 2 Dimensions: 11.81\"W x 9.05\"L x 2.09\"H Authorized Internet Dealer 1-year Manufacturer\'s Warranty Includes official LAB vinyl sticker (2.13\" x 2.75\") ⚠️Warning: Cancer and Reproductive Harm-
Hello friends, in this post I will make an amplifier kit, using the TDA8954TH class-d amplifier chip that I have previously made, but in thi...
Ever wanted to find out more about Class D amplification? Here's a handy breakdown.
Hello on this occasion, I will share the circuit scheme and PCB class-d power amplifier using IC TPA3116D2/ TPA3116, Power Amplifier IC T...
$69.95 Portable Audio & Video mifa A90 Green Bluetooth Speaker 60W Output Power Bluetooth Speaker with Class D Amplifier Excellent Bass Performace.
This comprehensive book on audio power amplifier design will appeal to members of the professional audio engineering community as well as the student and enthusiast. Designing Audio Power Amplifiers begins with power amplifier design basics that a novice can understand and moves all the way through to in-depth design techniques for very sophisticated audiophiles and professional audio power amplifiers. This book is the single best source of knowledge for anyone who wishes to design audio power amplifiers. It also provides a detailed introduction to nearly all aspects of analog circuit design, making it an effective educational text. Develop and hone your audio amplifier design skills with in-depth coverage of these and other topics: Basic and advanced audio power amplifier design Low-noise amplifier design Static and dynamic crossover distortion demystified Understanding negative feedback and the controversy surrounding it Advanced NFB compensation techniques, including TPC and TMC Sophisticated DC servo design MOSFET power amplifiers and error correction Audio measurements and instrumentation Overlooked sources of distortion SPICE simulation for audio amplifiers, including a tutorial on LTspice SPICE transistor modeling, including the VDMOS model for power MOSFETs Thermal design and the use of ThermalTrak (TM) transistors Four chapters on class D amplifiers, including measurement techniques Professional power amplifiers Switch-mode power supplies (SMPS). 454 Line drawings, black and white
Free Shipping (Estimate - 1 week) Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlar® drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.
Enjoy the elegant simplicity of wi-fi sound with the Wren V5AP for Apple’s AirPlay. Wren combines cutting-edge audio know-how with “old school” supplies and workmanship to ship critical room-filling sound in lovely, actual wooden cupboards. Clean, minimalist design enhances any room. Get rid of difficult audio gear muddle and fill your life with nice sound …
World of high-performance sound - with the Marts Digital MXB-8000-1 Monoblock Class D Amplifier. Xtreme Bass Amplifier series - Marts Digital brings high-quality sound products from Brazil to the world. User-friendly features - includes a Bass Knob and User Manual for a hassle-free setup. RMS Power @ 1 Ohm 12.6V: 8000W RMS - providing optimal power for an intense audio experience. Experience the fusion of technological excellence - Marts Digital's MXB-8000-1 combines power, style, and sonic brilliance. Marts Digital 8000W Monoblock 1 Ohm Class D Amplifier w/ Bass Knob MXB-8000-1 This Listing Includes: (1) 8000W Monoblock Class D Amplifier (1) Bass Knob (1) User Manual Unleashing Sonic Power: Marts Digital MXB-8000-1 Immerse yourself in the world of high-performance sound with the Marts Digital MXB-8000-1 Monoblock Class D Amplifier, an 8000W powerhouse designed to elevate your auditory experience. This listing includes not only the 8000W Monoblock Class D Amplifier but also a Bass Knob for personalized control and a User Manual for seamless integration into your audio setup. Marts Digital Xtreme Bass Amplifier: Elevating Sound Worldwide Marts Digital takes pride in offering high-quality sound products from Brazil to the world. The Xtreme Bass Amplifier series, featuring amplifiers, voltmeters, and more, ensures you secure your seat on a journey into the universe of high-performance audio. User-Friendly Features: Included in this listing is not just a powerful amplifier; it also comes with a Bass Knob for intuitive control and a User Manual for a hassle-free setup. Experience the fusion of technological excellence and sonic brilliance with Marts Digital's MXB-8000-1. Specifications: RMS Power @ 1 Ohm 12.6V: 8000W RMS RMS Power @ 2 Ohm 12.6V: 5050W RMS RMS Power @ 1 Ohm 14.4V: 8150W RMS RMS Power @ 1 Ohm 14.4V: 5100W RMS Supply Voltage: 9.5-16V Frequency Response: 15Hz - 180Hz Low Pass Crossover: 50Hz - 180Hz SubSonic Crossover: 15Hz - 40 Hz Bass Boost: 0 to 12dB (35Hz - 70Hz) Signal to Noise Ration: 95dB Harmonic Distortion: 1% THD Input Sensitivity: 0.2V High Level Input: 6V Dimensions: 20 x 11 x 4.5 Inch
How to Build a High Efficiency Class-D Audio Amplifier using MOSFETs
Signaler cette annonce à Reverb
This is the Rev 001 without Post Filter Feedback (PFFB) - note that amp without PFFB has only about 6dB more THD but is capable of higher power. The THD is still very low and sounds wonderful - the commercial Warp-1 does not use PFFB because in my opinion, it sounds excellent and is capable of 150w into 8ohms whereas the PFFB version only can get 75w into 8ohms. This is a custom design based on the TI EVM board but with improved layout and features. Improvements include a very tight distance from PVDD power supply input connector to the TPA3255 input pins with close bypass caps and close bulk caps. Molex quick disconnect locking connectors used throughout for secure and reliable connections in high vibration environments. Faston spade terminals also available for BTL mode. An on-board NTC isolated connector for earth/chassis ground is also provided. A unique feature is the bottom side mounted TPA3255 to allow use of chassis as heatsink with a thermal spacer block. An underside standard passive heatsink can also be used. All mode programming is performed with a PCB mounted DIP switch. Analog input modes (SE, BTL, PBTL) programming is performed with selectable jumpers. The amp has been throughly tested and the sound quality is superb. The noise background is essentially zero (cannot hear anything with ear pressed to speaker cone). Measurements show noise baseline is about -125dB with no mains hum peaks or any hiss audible. Measurements show THD is about 0.0025% with dominant second order and descending higher harmonic distortion orders. This is the key difference between this implementation and all others which are all third order harmonic distortion dominant. Boards are available for immediate delivery. Once you place order, please message me to get a revised BOM and Schematics. Boards are 2mm thick FRP and 2oz copper with ENIG finish with BLUE color solder mask. Sold individually as EACH. More info here: https://www.diyaudio.com/forums/group-buys/340880-tpa3255-reference-design-class-amp-gb.html
Short Circuit & Over Current Protection Cast aluminum heat sink Full Range Class D Speaker Wire Gauge: 8 AWG, Power Wire Gauge: 4 AWG Frequency Response: 20 Hz - 20 kHz Rockford Fosgate Prime 750W 5-Channel Full Range Class D Amplifier R2-750X5 This listing includes: (1) R2-750X5 750W 5-Channel Amplifier (1) Wired Remote Level Control Module (1) 16' Remote Cable (3) 7" Speaker Input Harnesses (1) 3mm Allen Hex Key (4) 3/4" Screws (5) Flat Washers (1) Nut (1) Installation Manual (1) Certificate of Performance (1) Rockford Fosgate Contact Information Primed for Performance, the R2-750X5 amplifier is a 750 watt, full-range class-D, capable of operating at 4 or 2 stereo, and 4 bridged/mono with a subwoofer channel that can be run at 4 or 2. This amplifier is extremely efficient because of its class D technology which reduces demand on the vehicles electrical system. The amp also features C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass. The Prime Series were developed for car audio fanatics that want a reliable amplifier - with all the power and performance you've come to expect from Rockford Fosgate - at an economical price. Rockford Fosgate amplifiers are renowned world-wide for being "under rated," easily surpassing all specifications, and most importantly, generating more power than their ratings. The latest generation of Prime Series amplifiers are also designed to be easy to setup and configure, making them perfect for use with factory audio or custom aftermarket systems. Features: Balanced Differential Inputs with RCA Pass Through Outputs High-Level Input Capable Auto-Sense bypass switch for vehicles with RAP (Retained Accessory Power) Features C.L.E.A.N. Set-up 2/4/5 Channel Input Selection Switch Includes RLC Remote Level Control Variable Infrasonic Filter Front, Rear and Sub Variable Input Gain adjustment level Continuously Variable On Board Punch EQ Top Mounted Control Panel Short Circuit & Over Current Protection CEA-2006 Compliant & CE Compliant Cast aluminum heat sink Full Range Class D Rollback Protection Fully Adjustable 12 dB/octave High and Low pass Butterworth Crossovers 1 Year Manufacturer Warranty Specifications: 5-Channel Amplifier Class D 750W Rated Power: 50W x 4 + 200W x 1 @ 4 Ohm 100W x + 350W x 1 @ 2 Ohm 200W x 2 + N/A @ 4 Ohm Bridged / Mono Dynamic Power: 70W x 4 + 241W x 1 @ 4 Ohm 114W x 4 + 426W x 1 @ 2 Ohm 234W x 2 + N/1 @ 4 Ohm Bridged / Mono Frequency Response: 20 Hz - 20 kHz Input Sensitivity: Low-Level: 150 mV - 4 V High-Level: 450 mV-12V Signal Input: Front Low-Level: 2 RCA Front High-Level: 4-Pin Molex Rear Low-Level: 2RCA Rear High-Level: 4-Pin Molex Sub Low-Level: 2 RCA Sub High-Level: 4-Pin Molex Input Switch: 2/4/5 Input (Works for RCA/Hi-Level Inputs) Crossover Controls: Front High-Pass: 50 Hz - 250 Hz @ 12dB/Octave Butterworth Front Low-Pass: 50Hz - 250 Hz @ 12dB/Octave Butterworth Rear High-Pass: 50 Hz-250Hz @ 12dB/Octave Butterworth Rear Low-Pass: 50 Hz - 250 Hz @ 12dB / Octave Butterworth Sub Low-Pass: 50 Hz - 250 Hz @ 12 dB/Octave Butterworth Sub Infrasonic: 15 Hz - 40 Hz @ 12dB/Octave Butterworth Remote Control: Yes Power Wire Gauge: 4 AWG Power Input Connector: Compression Terminal Block Speaker Wire Gauge: 8 AWG Speaker Output Connector: Compression Terminal Block Operating Voltage: 9-16 VDC Recommended Fuse: 120 A ( Not Included ) Max. Current Draw (13.8V Sinewave) 71 A Dimensions: Length: 11.2" / 28.5 cm Width: 6.8" / 4.9 cm Height: 1.9" / 1.3 cm
The Teno Illuminated Bluetooth Speaker is a compact and a beautifully imperfect sculpture that fits nicely in the palm of your hands or your living space. Break open its two halves, by running your fingers over its natural sand surface, to reveal a powerful speaker and a warm light. Inspired by the Japanese art of kintsugi, Teno blends intuitive technology with the refinement of a handcrafted object. Teno features a state-of-the-art bluetooth 5.0 chip and a 20W class-D amplifier to deliver the most powerful sound, while keeping distortions to an absolute minimum. Its impressive 45mm full-range driver delivers deep bass and crystal-clear treble. The speaker includes a discreet custom USB-C charging cable, and lasts up to 8 hours on a full charge.
Learn how to build your own Class D power amplifier—one of the most efficient ways to listen to music.
Marine Class D MOSFET Monoblock Power Amplifier Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow Stable at 1 ohm | Remote Subwoofer Level Control Included Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
Dynaudio LYD 48 3-Way Midfield Monitor, Left, White/Black This 3-way near- to midfield monitor reaches eyebrow-raising levels of accuracy thanks to a new soft-dome tweeter and Dynaudio’s proprietary MSP midrange driver and woofer. Each driver is fuelled by a powerful, state-of-the-art Class-D amplifier and a full 24-bit/96kHz signal path. And, like the rest of the LYD range, it lets you fine-tune low frequency response, position and sound-balance using cutting-edge DSP. Technical Specifications Max SPL (1m, pair) 112dB Principle Bass reflex Crossover Frequencies 460Hz / 5.5kHz Tweeter 1in soft dome Midrange 4in Woofer 8in Dimensions (W x H x D) 369 x 234 x 328mm Weight 12kg Sensitivity (85dB @ 1m, free field) +6dB: 50mV 0dB: 100 mV -6dB: 200 mV Power (Tweeter/Midrange/Woofer) 50W/50W/80W Type Class D Power consumption standby <0.5W Power consumption max. 100W Input voltage 90 - 264V AC, 50 - 60Hz Inputs XLR balanced/RCA unbalanced Outputs N/A Frequency response -6dB limits Bass extension +10Hz: 60Hz - 21kHz Bass extension 0Hz: 50Hz - 21kHz Bass extension -10Hz: 40Hz - 21kHz Free field frequency response 50Hz - 19kHz Frequency response -10dB limits Bass extension +10Hz: 52Hz - 24kHz Bass extension 0Hz: 42Hz - 24kHz Bass extension -10Hz: 32Hz - 24kHz
Circuit of 1500 Watt high power amplifier is very nice to talk about single power amplifier circuit is therefore not o be outdone by the ...
Free Shipping (Estimate - 1 week) Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlar® drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.
Learn how to build your own Class D power amplifier—one of the most efficient ways to listen to music.
1. 3.7-5VDC wide voltage power supply2. 9-channel one-to-one triggering interface, triggering 9 tracks (MAX)3. Low level signal trigger (S1...S9 and GND short contact trigger)4. Supports MP3 and WAV decoding formats, and supports audio file sampling rates up to 48KHz.5. Audio files can be changed by connecting to a computer via USB data cable, and comes with 32Mbit (4MByte) flash storage6. Comes with 5W Class D power amplifier, which can directly drive 403W and 801W speakers8. DIP switch sets 8 trigger working modes9. Playback status signal output: output high level (3.3V) when playing, output low level (OV) when not playing10. Playback status indicator: the red indicator light is on during playback11. Custom audio download interface: Connect the USB data cable to the computer, identify it as a U disk, and directly copy user-defined audio files12. Audio output: 3. 5mm audio output interface, can be connected to external active speakers13. Volume adjustment: adjust the speaker output volume, increase the volume clockwise, and decrease the volume counterclockwise.14. Speaker 5W (4-8 ohms): Speaker interface, output 5W, can drive 423W, 8 ohm 1W speakers15. DC 3.7-5V: Power supply interface, power supply range DC 3.7-5V16. Power indicator light: The green indicator light lights up after power is supplied.17. Configure trigger mode: Configure the 8 working modes (refer to the working mode configuration table). After the mode is changed, you must power on again to enter the new mode.18. Connect the data cable to the computer, identify it as a removable disk (U disk), and directly copy the audio file with a 5-digit file name, such as 00001.mp319. Scope of application: smart toys, passage gate voice broadcast, fire voice alarm, security voice alarm, industrial control voice broadcast, access control system voice broadcast20. Dimensions: 43x38mm21. Weight: 8 grams
Class D Switching Power Amplifier Project Related to the power of an AB class amplifier is categorized as efficient in power usage, but...
Product Description The new 600 Series from Bowers & Wilkins transforms your home with pristine sound. Since 1966, we've made technological advances to design the perfect loudspeaker and our latest innovations bring that heritage to music and movie lovers alike. Each boasts an audiophile-standard, highly efficient Class D amplifier to capture every spine-tingling, water-shaking sound that you hear. Each of our subwoofers are finished to match the rest of the series, with beautiful matte black and white to seamlessly integrate with your home. With the sixth generation of the 600 Series, you can truly transform your space into a beautiful sound session.
Learn how to build your own Class D power amplifier—one of the most efficient ways to listen to music.
Kanto YU4 140W Powered Bookshelf Speakers with Bluetooth and Phono Preamp - Pair, Matte White - Music is made to be shared. Whether you’re hanging out with friends or kicking it solo, YU4 ensures you’re always in good company. Producing 140W peak power, its Class D amplifier effortlessly fills your room with rich, spacious sound. Carefully designed 4” Kevlar drivers and 1” silk dome tweeters faithfully reproduce your favorite tunes, letting you enjoy them to their fullest. Packed with connectivity, YU4 makes it easy to throw on your latest vinyl with a built-in phono preamp, or sit back and stream your carefully curated playlist via Bluetooth. Crystal-clear, detailed sound for all to enjoy. REMARKABLE SOUND – Enclosed in handcrafted MDF cabinets measuring 8.7" tall, YU4’s 1” silk dome tweeters and 4” Kevlar drivers deliver crisp highs and wonderfully balanced mid-range, faithfully reproducing all your favorite tunes. EASY STREAMING – Built-in Bluetooth with Qualcomm aptX technology lets you enjoy high-quality streaming from the palm of your hand. VINYL-READY – Equipped with an integrated phono preamp, YU4 can be easily connected to any vintage or modern day turntable. SIGNAL DETECTION – YU4 features automatic standby and power-up modes, helping to conserve power when you’re gone and ensuring you never miss a beat when the music starts playing. REMOTE CONTROL – With volume, input, tone and balance controls, as well as playback options when using Bluetooth, the YU4 remote gives you full control over your audio. - Each speaker measures 5.5" W x 7.5" D x 8.7" H (14 x 19 x 22 cm)
VIP PRO AUDIO INC Brooklyn, NY, United States (1,168) Joined Reverb:2015 Items Sold:4,232 Preferred Seller Quick Responder Payment & Returns Message Seller Seller Reviews Seller's other items
Advanced negative feedback circuit enhances damping factor and sound accuracy, preventing distortion. Bass Boost function included Variable low pass filter for precise sound tuning RMS ratings: 300W at 4Ω and 500W at 2Ω Kenwood Class D 1 Channel monoblock 1000 Watts Power Amplifier This Listing Includes: (1) Class D Monoblock Amplifier KAC-D5101 The Kenwood amplifier boasts a maximum power output of 1000W, with RMS ratings of 300W at 4(ohm) and 500W at 2(ohm). Its compact size, measuring at, makes it versatile for various installations. It features a variable low pass filter for precise sound tuning and incorporates a Bass Boost function. Notably, it employs an advanced negative feedback circuit to enhance damping factor and sound accuracy. This circuit detects and counters unwanted speaker movement, preventing distortion and ensuring faithful reproduction of the original audio signal. Specifications: Max Power 1000W RMS 300W (4(ohm)) RMS 500W (2(ohm)) Size (inch) (W) 6-11/16" x (H) 2-3/16" x (D) 7-3/8" Variable Low Pass Filter Bass Boost
Perfectly suited for use with DZR full-range speakers, the DXS15XLF is a Dante-equipped powered bass-reflex type subwoofer with extended low frequency, producing a best-in class maximum SPL of 136dB SPL with superb clarity and power. Powered 15” subwoofer with 4” Voice Coil Maximum 136dB SPL and 33Hz-150Hz frequency range is ideal for today’s sound engineering demands High power 1600W Class-D amplifier module 96kHz DSP for true high-definition sound with super low latency Equipped with Dante I/O (2in/2out) and features SRC (sample rate conversion) allowing 48kHz device compatibility Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display Equipped with D-XSUB processing and cardioid mode capability Lightweight yet very durable plywood cabinet with premium grade Polyurea coating Optional speaker cover (SPCVR-DXS15X) and wheel kit (SPW-1) Durable Black finish Power and Performance. Integrated. Best-in-class SPL performance, sophisticated DSP processing, unrivaled low-frequency bass sound reproduction— the new DZR delivers on all fronts realizing a truly professional sound delivered with a level of power that belies its compact, lightweight design. How Low Can You Go? Not for the faint of heart, the newest DXS XLF’s go deeper than any model before, with an extended low frequency of 30Hz— perfect for professional touring musicians, DJ’s, and sound engineers who need that extra-low, thundering bottom end that you just can’t get from other subwoofers in this class. Flexible DSP and a bass-reflex cabinet design with a wide, flared port ensure your lower frequencies maintain outstanding clarity and musicality even when the volume is cranked.
Highlights 6" Front-firing woofer in a sealed enclosure delivers deep, smooth, and punchy bass Features a continuously variable 40-130 Hz crossover, allowing you to fine-tune the sound to your preference Built-in 210W (140W RMS) class D amplifier provides plenty of power for a robust bass experience Flexible connectivity with dual analog audio inputs (3.5mm mini-jack and line-level stereo/LFE RCA inputs) The S6 fits well in desktop setups, gaming rigs, and home theaters without sacrificing performance Description With 210 watts of power the S6 is the ultimate bass support for your laptop desktop home theater or gaming setup. The S6 delivers deep smooth and punchy bass from a front-firing woofer in a sealed box that might just take you by surprise. Bottom line prepare to have your mind blown. Features: 6" Front-Firing Woofer Built-In 210W (140W RMS) Class D Amplifier Continuously Variable 40-130 Hz Crossover 3.5mm Mini-Jack Input & Line-Level Stereo/LFE RCA InputsThere's Nothing "Sub" about This Subwoofer.. What's in the Box: •S6 6" Powered Compact Subwoofer •Power Cord •Mini-Jack Audio Cable •RCA Audio Cable •Microfiber Subwoofer Bag •Microfiber Cable Bag •Manual
Free Shipping (Estimate - 1 week) Satisfy your craving for powerful, full-impact sound with YU6. Armed with a formidable Class D amplifier pumping out 200-Watt peak power, YU6 will have you questioning what it really means to be loud. Its 5.25-inch Kevlar® drivers and 1-inch silk dome tweeters inject detailed sound into every square inch of living space, evoking emotions that can only be expressed with an ear-to-ear grin.
Powerful Performance: The Deaf Bonce Machete MLA-70.2 XS amplifier delivers a robust 70 watts RMS per channel at 2 ohms, ensuring a powerful and clear audio experience in your vehicle. Efficient Class D Technology: With advanced Class D technology, this amplifier provides high-performance audio with minimal distortion, allowing you to enjoy your favorite music with exceptional clarity. Customizable Sound: Tailor the audio to your preferences with adjustable high-pass and low-pass filters, as well as variable bass boost. Fine-tune the settings for an immersive and personalized listening experience. Compact and Stylish Design: The Machete MLA-70.2 XS combines power with style in a compact form factor. Upgrade your car audio system with this sleek amplifier that not only sounds great but also looks impressive. Deaf Bonce Machete 70 Watts 4 ohm RMS 2-Channel Class D Amplifier MLA-70.2 XS This listing includes: (1) Machete 70 Watts RMS 2-Channel Class D Amplifier The Deaf Bonce Machete MLA-70.2 XS amplifier is a compact powerhouse designed to elevate your car audio experience. With 70 watts RMS per channel at 2 ohms, this amplifier delivers clear and powerful sound, making your favorite music come alive. Its efficient Class D technology ensures high performance with minimal distortion, providing a crisp and immersive listening experience. The amplifier features adjustable high-pass and low-pass filters, as well as variable bass boost, allowing you to customize the sound to suit your preferences. Compact, stylish, and powerful, the Machete MLA-70.2 XS is an excellent choice for those seeking a premium audio upgrade for their car. Specifications: Class D Number of the channels 2 Frequency response 20-20000 Hz 2 Ohm RMS Power (14.4 V) 100 W x 2 4 Ohm RMS Power (14.4 V) 70 W x 2 4 Ohm RMS Power (Bridge) 200 W x 1 Minimum permissible load on the channel 2 Ohm Minimum permissible load in a bridge connection 4 Ohm Low pass filter 40-400 Hz High pass filter 40-400 Hz LPF and HPF simultaneous operation True Crossover 12 dB/Oct Input terminal 4 Ga Output terminal 8 Ga Working voltage 9 - 15V Signal-to-noise ratio â 85 dB Size (WxLxH) 5.4 x 3.2 x 1.4 inch
Actieve studiomonitor 80W 2-Weg systeem met Class-D versterkers Vermogen: 50 W + 30 W Uitgerust met: 2x 4" (100 mm) Woofer, 1,25" (32 mm) Silk Dome-Tweeter en 2x 5,25" (132 mm) passieve conus Frequentiebereik: 50 - 20.000 Hz Crossover frequentie bij 2200 Hz Stand-by functie Afmetingen: 330 x 160 x 200 mm Gewicht: 4,6 kg Ingangen: XLR Gebalanceerd 6,3 mm Jack gebalanceerd RCA 30 30 dagen Money-back garantie 3 Drie jaar Thomann garantie Leverbaar sinds April 2021 artikelnummer 494898 verkoopseenheid 1 stuk Speaker size 2x 4" Amplifier power per unit (RMS) 80 W Magnetic Shielding No Analogue XLR Input Yes Analogue Input (Jack) Yes Analogue Input (Mini Jack) No Analogue Input (RCA) Yes Digital input No Manual frequency correction Yes Frequency range min. 50 Hz Frequency range max. 20000 Hz Dimensions in mm 330 x 160 x 200 Weight in kg 4,6 kg Speaker Hous8ing - Woofer System Passive Men Toon meer
Designed to be the beating heart of your K-array system, the Thunder-KS2 I active 18" subwoofer with integrated DSP features audio power outputs that allow...
