Vegetables are stewed in an aromatic tomato sauce until succulent and tender in this recipe for Simple Vegetable Tagine. Clay pot optional!
Carefully handcrafted ceramic clay pots that come in a wide range of colors and floral designs. Suitable for all kinds of succulents, cactus, and other small plants. Material: Crafted from clay Features: Clay pots are very porous, which allows them to have excellent air permeability. Each pot comes with a drainage hole at the bottom to allow excess water to leak out. The pots' exterior are hand-painted and glazed. The pots' interior and bottom are not glazed to allow water drainage and air exchange for the roots. Each pot also comes with three feet on the bottom for better water drainage and air circulation. Approximate Size of Each Pot L x W x H: 3 1/2 in x 3 1/2 in x 3 1/4 in Note: Plant NOT included Each planter is handmade and will vary slightly
A few weeks ago our good friend Liz (Cave Girl Eats) posted a delicious looking recipe for rabbit. We had never tried rabbit before, nor did we have much of a desire to try it. Hey, after cows tongue (and heart!) we really don't rule anything out anymore, so if the opportunity presented itself, rabbit
Clay pots are awesome for your aquarium. Learn how to create an underwater terracotta paradise for your fish in this detailed guide!
Grab your rake or leaf blower! Check out these adorable, easy and kid-friendly Thanksgiving turkey crafts you can make with leaves.
Description \n \nAre you looking for professional and affordable fish tank decorations? If yes, look no further! Our products can meet your needs. Every detail is meticulous, giving it a chic and beautiful appearance. Including a hiding cave and an artificial plant decoration, the two are well integrated to become a beautiful decoration in the fish tank. \n \nFeatures \n \n-Color: Green, gray \n-Artificial plant material: Plastic \n-Rock cave material: Clay \n-Artificial plant size: 25.00X22.00X8.90cm/9.82X8.65X3.50in \n-Rock cave size: 9.00X6.00X6.00cm/3.54X2.36X2.36in \n-Great value set: Includes a hideout cave and a faux plant decoration. \n-Hideout cave: Made of ceramic with a smooth surface, safe for . \n-Natural texture: The hiding hole of the fish tank imitates the texture of stone, making the fish feel friendly. \n-Artificial plant decoration: Natural appearance, realistic plant decor, no effect on fish and water quality. \n- Exquisite ornaments: The good fusion of the cave and plant decoration becomes a beautiful landscape in the fish tank.
I have at last reached the stage where I can begin to put the hoards (is that the correct collective noun?!) of ceramic caves together into a single form. I have procrastinated quite a bit over this today! I spent such a long time in making the caves that I was terrified it would all go horribly wrong when I came to join them together. It was a bit of a faff! As my friend, Rebecca suggested I could really have done with some help from the Blue Reef octopus tonight; I just didn't have enough hands! I also needed to switch off gravity for a bit... (that's the force I'm talking about, nothing to do with my general outlook.) Thankfully, things seem to have gone okay... so far... At least they did once I got myself properly sorted with everything I needed in order to do the job. I never seem to be properly prepared when I begin this kind of task - you'd think I'd learn (maybe I'm taking this 'thinking like a fish' business too far)! For example I hadn't really thought about how I was going to move the finished - delicate and heavy - piece from my work bench to the back of my car for transporting to the kiln. Fortunately, I did manage to get a wooden board underneath it on completion of the first layer of caves. The balloons idea actually turned out to be a good one. The balloons gently support the lower caves without putting any pressure on the clay and I've blown them up so as to only just touch the inside of the ball thus allowing the clay some room for shrinkage during the building process. If necessary I'll let a bit more air out of the balloons as the clay shrinks although balloons always seem to shrink over time as well. I reckon this work is going to take a lot of monitoring as it dries. There are good few stress points to keep an eye on. I managed to get up to the third level of large caves tonight and then I'd had enough! Each of these caves has a passage way to the one at the side or above/below it, thus fish can swim between them. I've varied the hole sizes between the caves so that some of the bigger fish will be limited to certain routes through, and the smaller fish will then get chance to zip through the entire sculpture and hide if they need to. As I said in an earlier post, this particular work is really great fun to make. There's something very appealing about making something I know will be used by an animal or two! I hope to have the piece finished by the end of tomorrow. Will report back on further progress later...
Grade 6 sculpted their Father's Day pots. Normally I wait until I have a completed sample to show you but with Father's Day approaching I thought I'd show you the process and add some pictures of the final results in a few weeks. That way if you want to try this with your class you still have time. MATERIALS REQUIRED: - clay - access to a kiln or use air dry clay - nails for cutting with - wooden skewers - little cups of water - piece of canvas like fabric to work on - rolling pin - newspaper - glaze - potting soil - cat grass seeds, alfalfa seeds, etc. for hair PROCEDURE: So the pot is made by slab construction. You can do a pinch pot but I wanted the Grade 6's to have a nice smooth surface to mold their face on. Roll out a clay slab about 1/2 inch thick. Cut a long rectangle with a nail. Roll into a cylinder overlapping the ends a bit. With your finger and a little bit of water smooth the seam and ensure a tight seal. Cut a bottom out of remaining rolled clay. Trace around the outside of your cylinder. Make a hole in the circle (bottom) for drainage in the finished pot. To "glue" the cylinder to the bottom you want to scratch or score both pieces of clay where they will be attaching. Add a little bit of water with your finger. Smooth the seam with your finger and a little more water if needed. Tap the pot on your work table lightly to ensure the bottom will be level. Now we can start sculpting the face. We want this to look like our Dad so the students brought in photos or had them on their cellphones to use as reference. Start by molding the nose, attach a triangular shape to the pot and then round the tip and smooth the bridge of the nose. Add the eyebrows. Roll out a thin snake. Cut to desired length and attach smoothing into bridge of the nose. Make sure you scratch and moisten when "gluing" 2 pieces of clay together. For the eyes you can form an outline using those thin snakes. Apply to the face. Cut little ovals out of some rolled clay for the eyeballs an attach inside the outline. Using a skewer you can mark in the pupils. Make a mouth in the same fashion with thin rolled snakes and apply to the face. You can add scratches to the eyebrows as well as extra clay to form the cheekbones and chin. Just make sure to tap the pot after making the chin to ensure that flat bottom. Add ears. You don't want them to stick out too far or else they will just break off. Finally add a 1/2 piece of newspaper crumpled up and place in pot to help it hold it's shape while drying. Remove the newspaper before firing. Place pots in a warm place with lots of air circulation to dry out. I cover mine loosely with garbage bags for about 2 days and then I remove the bags and let the pots finish drying. This slows down the drying process (we are so dry here in Calgary) and stops cracking. That's it for now. I'll fire these pots in about 10 days or so when they are no longer cool to the touch. Stay tuned for part 2. Later....
Pink is still talking about the Stone Age people and how they lived in caves and needed fire to survive and is very keen to know what happened next. In her words “mommy surely they did not g…
Handcrafted with reclaimed vintage wood in a traditional antique Chinese style, this vintage elmwood table makes for the perfect contemporary console for your entryway, dining room, or living room. Its generous size provides ample room for styling with your favorite accessories, candles, and books! This vintage console is sturdy in construction with everyday use in mind. Each piece is one-of-a-kind and slight variations between pieces can be expected. Handcrafted in the Shandong Province of China.
designing container gardens
.css-1sgivba{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;gap:0.5rem;margin-bottom:var(--chakra-space-2);} .css-cosgki{font-size:16px;font-weight:var(--chakra-fontWeights-bold);} Product Type: Giclee Print Print Size: 12" x 9" Finished Size: 12" x 9" .css-1336n79{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;gap:0.5rem;margin-top:var(--chakra-space-8);margin-bottom:var(--chakra-space-8);} Product ID: 56123833503A
It’s my belief that ordinary objects can transform into something quite glamorous with some thoughtful accessories. So why not give your flowers a bit of g ...
Pinch pots are simple hand-made pottery that your kids can also make! These ideas for pinch pots will let you and your kids explore so many beautiful and creative pinch pot ideas together! Have a
Hello All! I've created a few handmade Polymer clay fry or Shrimplet hides for cool aquariums. These have the added benefit of being porous enough to help your beneficial bacteria grow and thrive! Excellent in allowing baby fish or shrimp to hide out and graze in peace. These are handmade by me, and will vary in color and composition. There are some photos above of sample sizes and look. These are the smaller pots I offer, as the pots are only 1.5" high. The succulents will make these a total of about 3" high, and less than 3" wide. These Fry caves are made of baked Polymer clay and natural lava rock. They are unglazed, unpainted, and untreated, and perfectly safe for tanks. They do not in any way affect your tank parameters. They are basically PVC, Terra- cotta, and natural stone. You have the option of a succulent pot filled or unfilled with lava rock. The options are pictured above. :) You'll receive these wrapped in tissue paper, nestled in a windowed kraft gift box. Check out my other listings for neat Aquarium decor, tank mates, and plants! I ship USPS first class Mondays and Fridays to try to ensure USPS gets this to you before a weekend. Please be sure your address is correct! Thank you for looking, aqua friends! This is a weird time for us all. I want to thank you for allowing me to practice my hobby from home. It brings me so much joy 🙏
Children seem to be fascinated by creatures like dragons, dinosaurs, and bats. This cave aims to provide the perfect dwelling for them and is a lot of fun to make. You can also consider this projec…
From the maker, The Minimalist Ceramist: The Cave of Inspiration was designed to encourage a connection with nature and the exploration of the outdoors. It makes the perfect home for crystals, pinecones, rocks, air plants and other tiny treasures. This is a gypsum cement reproduction of one of my original hand sculpted ceramic curio shelves. The mold and cast were both handcrafted by The Minimalist Ceramist in her California home studio. Approx. 11 x 8 inches Weight 4lbs Please note: Due to the handmade nature of this product, slight variations in color and imperfections are to be expected and part of the handcrafted charm. The Minimalist Ceramist is a women-owned, small business based in Novato, CA.
We wanted to add some spring beauty to our table with Moss Covered Pots but the selection out there has been either too expensive or poor quality. Perfect time for a DIY Frug-Elegant challenge & we think we hit a home run! Have you taken notice to how popular moss covered decor is right now? The stores are [...]
Learn how to create a planter made with hypertufa, a material that has an ancient, hand-hewn quality. They are perfect for alpines, succulents, mosses and more.
Here I'm caving the veins into the leaf motif.
Handmade Bob Belcher from Bob’s burgers plant pot. All of my listings are for UK shipping only. Pot is 15cm