Hand-Penned Petals from Stampin Up. Created by Teri Pocock. Click through for more details. #teripocock #stampinup #stampinmagic #handpennedpetals
Happy Tuesday! I'm sharing another Hand-Penned Petals swap card today. This pretty card was made by Laurie Reaume, and is so lovely to look at. Laurie's card features the same stamp that was on Maria's card yesterday. You can find it in the Hand-Penned Petals Bundle. This one was stamped in Pale Papaya and Soft
I'm a Stampin' Up! Demonstrator sharing creative projects and stamping techniques to inspire you in card making, memory keeping, and paper crafting of all kinds.
The Hand-Penned Suite of products is definitely a must-have for any card maker! You’ll be reaching for it all year. Hand Penned Petals is extremely versatile. Hand Penned Petals is perfect for...Read More
I thought it was Monday almost all day - sorry this is late getting posted! Supplies: • Stamp Sets: Hand-Penned Petals Bundle (155492) • Cardstock: Fresh Freesia (155613), Basic White (159276) • Ink: Fresh Freesia (155611), Memento Black (132708), Fresh Freesia Blends Combo (155518), Daffodil Delight Blends Combo (154883), Soft Succulent Blends Combo (155521) • Tools & Accessories: Stampin' Cut & Emboss Machine (149653), Scalloped Contours Dies (155560), Fresh Freesia Open Weave Ribbon (155615), 2021-2023 In Color Jewels (155571), Tasteful Textile 3D Embossing Folder (152718), Stampin’ Dimensionals (104430), Multipurpose Liquid Glue (110755), Glue Dots (103683), Grid Paper (130148) • Designer Paper: Pansy Petals (155807) Measurements: • Card Base: Fresh Freesia 4 ¼ x 11, score at 5 ½ • Cardstock #2: Fresh Freesia 4 1/8 x 5 3/8 • Cardstock #3: Basic White 3 3/8 x 4 5/8, 2 ¾ x 2 ¾ for flower, scrap for sentiment • Designer Paper #1: Pansy Petals 2 5/8 x 4, 1 ½ x 4 ¼ (To save paper cut a piece 1 ½ x 3 and cut in half. Add from each edge using Grid Paper to make sure you are straight.) Instructions: • Stamp the flower stamp over the 4 1/8 x 5 3/8 piece of Fresh Freesia. Stamp randomly in Fresh Freesia and turn stamp as you go. Run this layer through the Cut & Emboss Machine with the Tasteful Textile 3D Embossing Folder. Add to the card front. • The the strip of Fresh Freesia gingham designer paper across the mid-section of the card front. Use Grid Paper to make sure you are straight. See note above about saving just a little of the DSP. • Cut the Basic White layer with the 2nd largest rectangle in the Scalloped Contours dies. Add to the card with dimensionals. • Cut the other pieces of gingham paper with the 3rd largest of the Scalloped Contours dies. Glue to the center of the white layer. • Stamp the flower cluster with Memento Black ink of the white square. Color using the Fresh Freesia, Soft Succulent, and Daffodil Delight combo of blends. Cut this out with the Penned Flowers dies. Add with dimensionals. • Stamp the sentiment from Hand-Penned Petals in Fresh Freesia on a scrap of white. Fussy cut with snips and add to the card with dimensionals. • Add a bow of Fresh Freesia Open Weave Ribbon to the flower stem with a glue dot. • Add a freesia jewel from the 2021-2023 In Color Jewels. Product List Hand Penned Petals Bundle (English) Basic White 8 1/2" X 11" Cardstock Fresh Freesia 8 1/2" X 11" Cardstock Pansy Petals 12" X 12" (30.5 X 30.5 Cm) Designer Series Paper Tuxedo Black Memento Ink Pad Fresh Freesia Stampin' Blends Combo Pack Soft Succulent Stampin' Blends Combo Pack Daffodil Delight Stampin' Blends Combo Pack Stampin' Cut & Emboss Machine Scalloped Contours Dies Tasteful Textile 3 D Embossing Folder Fresh Freesia 3/8" (1 Cm) Open Weave Ribbon 2021–2023 In Color Jewels Multipurpose Liquid Glue Stampin' Dimensionals Mini Glue Dots Grid Paper Add All to Cart
What caught my eye about today's card was the colors. I love the richness of them. And I like the stamped background on the Designer Series ...
I have lots of birthdays coming up and today’s card is one of the sweetest birthday cards yet! Paper Pumpkin kits for $5?? Yes, it’s true! Check out today’s blog to subscribe toda…
Hand-Penned Petals from Stampin Up. Created by Teri Pocock. Click through for more details. #teripocock #stampinup #stampinmagic #handpennedpetals
stampin up, hand penned petals, in-colors 2021-2023
Today’s tutorial is for a hand-penned blends flower card. This card steps up the Hand-penned Freesia card with some die cutting and gems.
Hello and welcome to our All Star Tutorial Bundle Design Team Blog Hop for August 2021. This month we are using the Hand-Penned Suite. The projects featured in the bundle are exclusive and the tutorials come complete with photos, video directions and a supply list that includes both Metric and Imperial measurements. Here is a sneak peek of the Hand-Penned bundle of tutorials. To enjoy the tutorials you have several options: shop with me - if you order from my online store you will receive that month's bundle for free purchase - buy the bundle for £11.50 Join my Team - team members will receive the tutorials for free I am completely smitten with this suite - it's so elegant and the Designer Series Paper is crisp and fresh. One side has soft watercoloured flowers and the reverse side has a white pattern printed over a light wash of colour. One of the free items available during Sale-A-Bration coordinates with the Hand-Penned Suite - the Beautifully Penned papers have the same gorgeous patterns but in a dramatic, black and white palette rather than coloured. To give you even more inspiration each of us has created another project using the Hand-Penned products. Here is my project for today. For my project today I have gone for a quick and simple card - the kind you need when you want to be creative, but you are in a hurry. I have used the Memories and More cards that coordinate with this suite - same floaty, floral images with a mixture of coloured and black/white artwork. I'm often guilty of saving the M&M cards for memory keeping, and ultimately forgetting to use them, so I am really pleased that I've focused on the More part of the name today and incorporated them onto my card. The flowers on this particular card have a very calm and relaxing feel about them so I have kept the decoration for the card very simple. I used the scalloped die to edge the foot of the card, stamped thanks, added a few metallic pearls and a soft, floppy bow with white seam binding ribbon. I am thoroughly enjoying creating with these products - the mix and match coordination of the suite, SAB papers and M&M cards makes them so versatile. Such a joy to create with them. Let me know what you think in the comments below. If you want to be inspired with more ideas using this suite you can purchase the tutorial bundle (along with previous tutorials) HERE. Thank you so much for visiting today. Click on the names below to hop around and see all the other amazing projects. Enjoy! If you live in the UK you can purchase these products below. Blog Hop List: Stay safe and as always happy crafting, If you would like to order any supplies, and you live in the UK, I would love to be your demonstrator. Use the hostess code RT7H9JAB to get some free product (it will follow in the post after the end of the month). If your order is over £150 do not use the code as you become the hostess and get the rewards. To place an order please visit my online shop HERE. If you would like to join my team, you can choose your starter kit HERE and if you have any questions, please contact me at [email protected] Click on the images below to purchase them in my online shop: All Star Tutorial Bundles All Star Tutorial Bundles have 12 AMAZING video tutorials to inspire you each month. Click HERE for sneak peeks or to purchase. FREE with a purchase from my online store Sale-A-Bration Sale-A-Bration runs until 30th September and has a range of benefits. Shop choose a free Sale-A-Bration product with every £45 or £90 you spend (before shipping and handling). Purchases from the Annual Catalogue, Mini Catalogue and Kits Collection all count! Host Rewards Earn even more free product by placing an order over £275. Along with Stampin' Rewards and Sale-A-Bration freebies you will also receive the exclusive In Your Words stamp set Join A Starter Kit is always a great deal, but during Sale-A-Bration the deal is even better! Build your Starter Kit by choosing £130 product for just £99 and during Sale-A-Bration you can choose a bundle from a list of bundles in the Mini catalogue.
Hi everyone, a couple of days ago I shared a card featuring the fun technique of…
Make a bunch of beautiful monochromatic cards with the Penned Flowers Dies and the new 2021-2023 Stampin' Up! In Colors!
An Independent Stampin Up Demonstrator
#handpennedpetals #stampinup #thespotchallenge158
Happy Tuesday! I'm sharing another Hand-Penned Petals swap card today. This pretty card was made by Laurie Reaume, and is so lovely to look at. Laurie's card features the same stamp that was on Maria's card yesterday. You can find it in the Hand-Penned Petals Bundle. This one was stamped in Pale Papaya and Soft
Hi Stampers, Today’s post will be dedicated to a type of die I don’t use often. I call them the INTRICATE DETAIL dies. I have no clue what they are officially called, but to me intricate detail describes them perfectly. The type of die I am talking about is like this one from the PENNED FLOWERS DIES: It is very pretty, and when I use it to die cut the image from cardstock, I like the result, but rarely do I actually do something with the die cut. They tend to be difficult to adhere (there are solutions for this problem), and I sometimes just am at a loss when it comes to incorporating them in a card design. So, today I decided it is time for me to overcome these challenges. I am sharing my results and a few tips. First let’s take a look at the entire set of the PENNED FLOWERS DIES and the coordinating stamp set, HANDED- PENNED PETALS. These items are featured as a bundle and as part of a suite in the STAMPIN’ UP! 2021-2022 ANNUAL CATALOG which goes live one week from today (4 May 2021). PENNED FLOWERS DIES & HAND-PENNED PETALS (HAND-PENNED PETALS BUNDLE) Here are the items I used from this bundle to create today’s cards. (The floral bouquet stamp image, the outline die, and the intricate detail die.) Here are the cards. For this card I used the outline die and the intricate detail die to create pieces for the card’s focal point. SUPPLIES: Card Base - Basic White cardstock 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Blushing Bride) Other Cardstock - Blushing Bride and Basic White Ink - Versa Mark and White Embossing Powder Other Dies - Layering Circle Dies and Stitched So Sweetly Dies Adhesives - Dimensionals and Multi-purpose Glue * The Happy Birthday greeting is from the PANSY PATCH stamp set. Use the Versa Mark to stamp the greeting on Blushing Bride cardstock. Sprinkle the white I die cut the intricate detail image from Basic White cardstock, and used the multipurpose glue to adhere it to the Blushing Bride piece I cut with the outline die. When using multipurpose glue to adhere the intricate detail dies I look for the largest spaces on the die cut and apply the glue in those areas in a very thin line. To avoid too much using too much glue, I squeeze a bit of glue out on my silicone craft sheet or on a scrap of paper. Once the glue has started it is easier to control the amount that comes out as you apply it to the die cut. Die cut a Basic White circle using the largest of the Layering Circle Dies, and from a piece of Blushing Bride cardstock cut a scalloped circle using the largest scalloped die. Adhere the two circle die cuts together. Now adhere the floral piece to the circles. Adhere the DSP to the card base.Use dimensionals to attach the focal point and greeting to the card. This card is similar to the card above, except it does not have the solid die cut image. The intricate detail die is adhered directly to the panel? I used the multipurpose glue for this die cut too. SUPPLIES: Card Base - Garden Green 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Garden Green) Other Cardstock - Basic White 5 1/4” x 4”, Garden Green and Basic White for the focal point Ink - Versa Mark and white embossing powder Other Dies - Stitched So Sweetly Adhesives - multipurpose glue, dimensionals *The greeting is from the SWEET STRAWBERRY stamp set. For the next card I stamped the floral image with Memento Tuxedo Black on Basic White cardstock, colored the image with Stampin’ Blends. I used the intricate detail die cut in Basic Black as an overlay for the floral image. SUPPLIES: Card Base - Basic White 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - Pattern Party - black& white check Other Cardstock - Basic Black 5 1/2” x 3” plus a piece for the die cut & Basic White for the floral image Ink - Memento Tuxedo Black, Stampin’ Blends of your choice for the flower image Other - white crinkled seam binding ribbon -12-14 inches. Adhesives - multipurpose glue and dimensionals * The greeting is from HAND-PENNED PETALS Stamp the greeting with the Tuxedo Black ink toward the lower right corner of the card base. Stamp the floral image on Basic White. Use Stampin’ Blends to color the image. Die cut the image and die cut the intricate detail image. Adhere the Basic Black overlay to the floral image. Adhere the checked DSP to the Basic Black mat. Tie the crinkled seam binding ribbon around the piece on the left side, and tie a bow. Trim the ends. Adhere the piece to the card base along the top of the card. Adhere the floral piece to the card with dimensionals. This card was easy to make. It is just a Basic White intricate detail die cut colored with Stampin’ Blends. SUPPLIES: Card Base - Basic White (thick) 8 1/2” x 5 1/2” scored and folded at 4 1/4” and a piece for the die cut Ink - Soft Succulent and Stampin’ Blends (or Stampin’ Write Markers). Other: In Color Open Weave Ribbon in Soft Succulent - about 18” and Champagne Rhinestones Adhesive: multipurpose glue * The greeting is from the TIMELESS TULIPS stamp set Stamp the greeting toward the bottom center of the card. Adhere the die cut to the card. Place the rhinestones in the centers of the flowers. Tie the ribbon around the card and make a bow. Trim the ends. The card is complete! TIPS FOR ADHERING THE INTRICATE DETAIL DIES 1. Use the method I described above with the multipurpose glue. 2. Multipurpose glue and a sponge. Place the die cut face down on a silicone craft sheet (or a piece of wax paper or parchment paper). Put a dab of the glue on the craft sheet. Dip a wedge of a craft sponge in the glue. Pounce the sponge gentle over the back side of the die cut. * Stampin’ Up! discontinued the Stampin’ Sponges. A sponge dauber can be substituted. After use wash out as much of the glue as possible and let dry. I am not sure how many uses you will get from the sponge dauber. I have used the same dauber twice, and it appears I will get at least one more use from it. 3. Fine Tip Glue Pen - The tip on this glue is made for the intricate dies. The tip can become clogged if the little pin inside the lid is not inserted into the tip of the bottle correctly when putting on the lid. I use it from time to time. 4. Mini Glue Dots - Some of the intricate detail dies have areas where the mini glue dots will fit. Sometimes I cut the glue dots in half, or use the paper piercing tip of the Take Your Pick Tool to roll the glue dot over on itself (sort of fold it in half), and place the glue dot on the die cut. 5. Adhesive Sheets - peel the backing off one side of a section of an adhesive sheet. Place a piece of cardstock the same size as the adhesive sheet over the exposed adhesive. Place the die on top of the cardstock and run it through the Stampin’ Cut & Emboss Machine (or other die cut machine). Peel the adhesive off the back dice of the die cut, and place it on the mat, card base, etc. There are several other die sets in the new catalog that contain the intricate detail dies. One is the Sunflowers Dies which are found in the current Annual Catalog. The Brilliant Wings Dies, which are available now as a special promotion. Here is another look at the cards I created with the intricate detail die from the PENNED FLOWERS DIES: That is it for today. Thank you for stopping by. Until next time... Stamp Happy! Kim Are you looking for a Stampin’ Up! Demonstrator? I would be happy to be your demonstrator. Simply click one of the catalogs found in the right column of this post. This will take you to my Stampin’ Up! Web Site. Click on SHOP, and you will be shopping with me. Or go to stampinup.com, click on shop. You will be prompted to select a demonstrator. You can select a demonstrator by name (Kim Tolbert) or by town / zip code (Vevay, IN). All stamps and stamped images ©️1991-2021 Stampin’ Up!®️
Dawn Olchefske, Stampin' Up! Independent Demonstrator, [email protected]
This is a blog about the latest Stampin' Up! products with card ideas and stamping and more.
Hi Stampers, Today’s post will be dedicated to a type of die I don’t use often. I call them the INTRICATE DETAIL dies. I have no clue what they are officially called, but to me intricate detail describes them perfectly. The type of die I am talking about is like this one from the PENNED FLOWERS DIES: It is very pretty, and when I use it to die cut the image from cardstock, I like the result, but rarely do I actually do something with the die cut. They tend to be difficult to adhere (there are solutions for this problem), and I sometimes just am at a loss when it comes to incorporating them in a card design. So, today I decided it is time for me to overcome these challenges. I am sharing my results and a few tips. First let’s take a look at the entire set of the PENNED FLOWERS DIES and the coordinating stamp set, HANDED- PENNED PETALS. These items are featured as a bundle and as part of a suite in the STAMPIN’ UP! 2021-2022 ANNUAL CATALOG which goes live one week from today (4 May 2021). PENNED FLOWERS DIES & HAND-PENNED PETALS (HAND-PENNED PETALS BUNDLE) Here are the items I used from this bundle to create today’s cards. (The floral bouquet stamp image, the outline die, and the intricate detail die.) Here are the cards. For this card I used the outline die and the intricate detail die to create pieces for the card’s focal point. SUPPLIES: Card Base - Basic White cardstock 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Blushing Bride) Other Cardstock - Blushing Bride and Basic White Ink - Versa Mark and White Embossing Powder Other Dies - Layering Circle Dies and Stitched So Sweetly Dies Adhesives - Dimensionals and Multi-purpose Glue * The Happy Birthday greeting is from the PANSY PATCH stamp set. Use the Versa Mark to stamp the greeting on Blushing Bride cardstock. Sprinkle the white I die cut the intricate detail image from Basic White cardstock, and used the multipurpose glue to adhere it to the Blushing Bride piece I cut with the outline die. When using multipurpose glue to adhere the intricate detail dies I look for the largest spaces on the die cut and apply the glue in those areas in a very thin line. To avoid too much using too much glue, I squeeze a bit of glue out on my silicone craft sheet or on a scrap of paper. Once the glue has started it is easier to control the amount that comes out as you apply it to the die cut. Die cut a Basic White circle using the largest of the Layering Circle Dies, and from a piece of Blushing Bride cardstock cut a scalloped circle using the largest scalloped die. Adhere the two circle die cuts together. Now adhere the floral piece to the circles. Adhere the DSP to the card base.Use dimensionals to attach the focal point and greeting to the card. This card is similar to the card above, except it does not have the solid die cut image. The intricate detail die is adhered directly to the panel? I used the multipurpose glue for this die cut too. SUPPLIES: Card Base - Garden Green 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Garden Green) Other Cardstock - Basic White 5 1/4” x 4”, Garden Green and Basic White for the focal point Ink - Versa Mark and white embossing powder Other Dies - Stitched So Sweetly Adhesives - multipurpose glue, dimensionals *The greeting is from the SWEET STRAWBERRY stamp set. For the next card I stamped the floral image with Memento Tuxedo Black on Basic White cardstock, colored the image with Stampin’ Blends. I used the intricate detail die cut in Basic Black as an overlay for the floral image. SUPPLIES: Card Base - Basic White 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - Pattern Party - black& white check Other Cardstock - Basic Black 5 1/2” x 3” plus a piece for the die cut & Basic White for the floral image Ink - Memento Tuxedo Black, Stampin’ Blends of your choice for the flower image Other - white crinkled seam binding ribbon -12-14 inches. Adhesives - multipurpose glue and dimensionals * The greeting is from HAND-PENNED PETALS Stamp the greeting with the Tuxedo Black ink toward the lower right corner of the card base. Stamp the floral image on Basic White. Use Stampin’ Blends to color the image. Die cut the image and die cut the intricate detail image. Adhere the Basic Black overlay to the floral image. Adhere the checked DSP to the Basic Black mat. Tie the crinkled seam binding ribbon around the piece on the left side, and tie a bow. Trim the ends. Adhere the piece to the card base along the top of the card. Adhere the floral piece to the card with dimensionals. This card was easy to make. It is just a Basic White intricate detail die cut colored with Stampin’ Blends. SUPPLIES: Card Base - Basic White (thick) 8 1/2” x 5 1/2” scored and folded at 4 1/4” and a piece for the die cut Ink - Soft Succulent and Stampin’ Blends (or Stampin’ Write Markers). Other: In Color Open Weave Ribbon in Soft Succulent - about 18” and Champagne Rhinestones Adhesive: multipurpose glue * The greeting is from the TIMELESS TULIPS stamp set Stamp the greeting toward the bottom center of the card. Adhere the die cut to the card. Place the rhinestones in the centers of the flowers. Tie the ribbon around the card and make a bow. Trim the ends. The card is complete! TIPS FOR ADHERING THE INTRICATE DETAIL DIES 1. Use the method I described above with the multipurpose glue. 2. Multipurpose glue and a sponge. Place the die cut face down on a silicone craft sheet (or a piece of wax paper or parchment paper). Put a dab of the glue on the craft sheet. Dip a wedge of a craft sponge in the glue. Pounce the sponge gentle over the back side of the die cut. * Stampin’ Up! discontinued the Stampin’ Sponges. A sponge dauber can be substituted. After use wash out as much of the glue as possible and let dry. I am not sure how many uses you will get from the sponge dauber. I have used the same dauber twice, and it appears I will get at least one more use from it. 3. Fine Tip Glue Pen - The tip on this glue is made for the intricate dies. The tip can become clogged if the little pin inside the lid is not inserted into the tip of the bottle correctly when putting on the lid. I use it from time to time. 4. Mini Glue Dots - Some of the intricate detail dies have areas where the mini glue dots will fit. Sometimes I cut the glue dots in half, or use the paper piercing tip of the Take Your Pick Tool to roll the glue dot over on itself (sort of fold it in half), and place the glue dot on the die cut. 5. Adhesive Sheets - peel the backing off one side of a section of an adhesive sheet. Place a piece of cardstock the same size as the adhesive sheet over the exposed adhesive. Place the die on top of the cardstock and run it through the Stampin’ Cut & Emboss Machine (or other die cut machine). Peel the adhesive off the back dice of the die cut, and place it on the mat, card base, etc. There are several other die sets in the new catalog that contain the intricate detail dies. One is the Sunflowers Dies which are found in the current Annual Catalog. The Brilliant Wings Dies, which are available now as a special promotion. Here is another look at the cards I created with the intricate detail die from the PENNED FLOWERS DIES: That is it for today. Thank you for stopping by. Until next time... Stamp Happy! Kim Are you looking for a Stampin’ Up! Demonstrator? I would be happy to be your demonstrator. Simply click one of the catalogs found in the right column of this post. This will take you to my Stampin’ Up! Web Site. Click on SHOP, and you will be shopping with me. Or go to stampinup.com, click on shop. You will be prompted to select a demonstrator. You can select a demonstrator by name (Kim Tolbert) or by town / zip code (Vevay, IN). All stamps and stamped images ©️1991-2021 Stampin’ Up!®️
Hi everyone, Welcome to my blog today. Thanks so much for popping in to see me. Did you catch my post yesterday as part of the Pootlers New ...
Hello Stampers, It is Sunday Sketch time, Alison Solven from Canada here today. Each Sunday Patsy Waggoner from the US (my border buddy) and I take turns creating a card using one of our card sketches. Sketches can help get your creative juices flowing. I find that when I'm stuck and seem to have lost ... Read More about Sunday Sketches Border Buddy with Hand-Penned Suite Collection
Welcome to Workshop Wednesday!! Tonight, I created three beautiful project using Stampin' Up's! Hand-Penned Petals Bundle. If you missed the live presentation on my YouTube channel, you can catch the replay below. I created two greeting cards, a birthday card and a thank you card. The images on both cards are water colored with Misty Moonlight and Mint Macaron on Shimmery White card stock. Misty Moonlight is one of the colors that is retiring on May 2, 2022. I think everyone loved the purse. It starts with a 9
An Independent Stampin Up Demonstrator
Learn how to make this cute card with Stampin' Up!'s Hand-Penned Petals stamp set and Penned Flowers Dies in this video tutorial!
Today I am sharing a little sneak peek of some of the items in the Hand-Penned product suite in the 2021-22 Annual Catalog. I am excited about this suite and think it is beautiful. You will also see a
Today I would like to share the SheetLoad of Cards September 2020 Template from Call Me Crafty Al. This template makes 8 cards with 12” x 12...
I used the Stampin’ Up! Hand-Penned Petals stamp set bundle from the upcoming 2021-2022 Annual Catalog (that starts tomorrow!!!) to create a thank you card to share with you today.
Handmade card made with the Beautifully Penned paper Hand Penned by Stampin' Up! made by Peggy Noe Pretty Paper Cards #stampinup #stampingup #peggynoe
Learn how to make this Hand Penned Petals Mirror Fold card with the video tutorial and PDF shared in today's cardmaking blog post.
Hand-Penned Petals from Stampin Up. Created by Teri Pocock. Click through for more details. #teripocock #stampinup #stampinmagic #handpennedpetals
Stampin’ Up! makes creating so easy with their coordinating products, and project samples in their catalogs. In this blog post (& video below) I’m sharing details about the Hand-Penned Suite found on page 104 & 105 of the 2021-2022 Annual Catalog, along with card sketches & samples. … Read More
Hand-Penned Petals Stamp Set from Stampin' Up! #DebbieMageed #SecretsToStamping #StampinUp #CreativeCreases #sttcchallenge
September 8, 2021 Here is a great card that shows off the gorgeous Sale-a-bration 2021 Designer Series Paper Beautifully Penned that you can get as a free gift during Sale-a-bration right now! Hone…
This is a blog about the latest Stampin' Up! products with card ideas and stamping and more.
Good Saturday morning my stamping friends. How has your weekend started off? I’ll be attending my virtual OnTour today for a few hours in the morning, then I have the rest of the day to mysel…
Welcome to the Stamp Review Crew's Hand-Penned Petals edition! The "Crew" is made up of a group of Stampin' Up! demonstrators from around the world who pick a stamp set or bundle to highlight on the first and third Mondays of each month, with a bonus hop if there is a fifth Monday. If you landed here from Nikki's blog, My Sandbox, welcome! There are seven of us today so it won't take too long, but there will be lots to inspire you! Hand-Penned Petals is a 15 piece photopolymer stamp set, and has a coordinating 14 piece Penned Flowers Dies set. And of course, if you bundle them both, you save 10%. I love that you can use the filler stamps for a quick card, or color the outline stamps yourself. I chose the peony image for the three cards I have to share today and, of course, I colored them in with Stampin' Blends. The first card uses the pretty Paper Lattice on page 141 of the catalog. I know it's part of a different suite, but everything Stampin' Up! makes just seems to go together! I had a leftover embossed strip from Saturday's card and adhered it behind the lattice. The Soft Succulent looks lovely with the Kraft lattice and Crumb Cake circle - really makes the leaves pop! A few 2021-2023 In Color (Evening Evergreen) Jewels were added to dress it up a little, along with an Evening Evergreen Open Weave bow and a Crumb Cake twine bow. The next card is sooo soft and feminine in real life - the photo just doesn't do it justice. I started with a Fresh Freesia card base and used the scalloped die from the coordinating Penned Flowers dies to trim a little off the bottom. A one inch strip of the plaid Fresh Freesia In Color DSP was adhered to the inside of the back flap. What really makes this card shine (pun intended) is the Fresh Freesia Shimmer Vellum. It is just so pretty and really takes the card over the top. But you know me, I had to add a little more shine, so some silver cord and silver epoxy diamonds completed the card. Look at that shimmery, shiny yumminess! Okay, okay, I'll quit sighing over it and show you the last project. (Seriously, I could have made a dozen more cards with this set!) For the final card, I went bold with the colors. After two with Fresh Freesia, I felt something in BLUE would be nice! I wanted to make this a birthday card, so I borrowed the die cut and greeting from A Wish For Everything. The peony was colored with Night of Navy, Daffodil Delight, Mango Melody, and Granny Apple Green Blends. It was popped up on vellum cut with a Scalloped Contours die, which was adhered over Basic White, adhered over some N.O.N. DSP, adhered over a N.O.N. mat and to the card base. WHEW, that's a lot of layers! The die cut "Happy" was cut from the navy Ombre Specialty Paper, and some Blue Adhesive-backed Gems were added. That's all for me, so jump on over to see what Mike at Stampin-Style has made!
Hand-Penned Petals from Stampin Up. Created by Teri Pocock. Click through for more details. #teripocock #stampinup #stampinmagic #handpennedpetals
Hi Stampers, Today’s post will be dedicated to a type of die I don’t use often. I call them the INTRICATE DETAIL dies. I have no clue what they are officially called, but to me intricate detail describes them perfectly. The type of die I am talking about is like this one from the PENNED FLOWERS DIES: It is very pretty, and when I use it to die cut the image from cardstock, I like the result, but rarely do I actually do something with the die cut. They tend to be difficult to adhere (there are solutions for this problem), and I sometimes just am at a loss when it comes to incorporating them in a card design. So, today I decided it is time for me to overcome these challenges. I am sharing my results and a few tips. First let’s take a look at the entire set of the PENNED FLOWERS DIES and the coordinating stamp set, HANDED- PENNED PETALS. These items are featured as a bundle and as part of a suite in the STAMPIN’ UP! 2021-2022 ANNUAL CATALOG which goes live one week from today (4 May 2021). PENNED FLOWERS DIES & HAND-PENNED PETALS (HAND-PENNED PETALS BUNDLE) Here are the items I used from this bundle to create today’s cards. (The floral bouquet stamp image, the outline die, and the intricate detail die.) Here are the cards. For this card I used the outline die and the intricate detail die to create pieces for the card’s focal point. SUPPLIES: Card Base - Basic White cardstock 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Blushing Bride) Other Cardstock - Blushing Bride and Basic White Ink - Versa Mark and White Embossing Powder Other Dies - Layering Circle Dies and Stitched So Sweetly Dies Adhesives - Dimensionals and Multi-purpose Glue * The Happy Birthday greeting is from the PANSY PATCH stamp set. Use the Versa Mark to stamp the greeting on Blushing Bride cardstock. Sprinkle the white I die cut the intricate detail image from Basic White cardstock, and used the multipurpose glue to adhere it to the Blushing Bride piece I cut with the outline die. When using multipurpose glue to adhere the intricate detail dies I look for the largest spaces on the die cut and apply the glue in those areas in a very thin line. To avoid too much using too much glue, I squeeze a bit of glue out on my silicone craft sheet or on a scrap of paper. Once the glue has started it is easier to control the amount that comes out as you apply it to the die cut. Die cut a Basic White circle using the largest of the Layering Circle Dies, and from a piece of Blushing Bride cardstock cut a scalloped circle using the largest scalloped die. Adhere the two circle die cuts together. Now adhere the floral piece to the circles. Adhere the DSP to the card base.Use dimensionals to attach the focal point and greeting to the card. This card is similar to the card above, except it does not have the solid die cut image. The intricate detail die is adhered directly to the panel? I used the multipurpose glue for this die cut too. SUPPLIES: Card Base - Garden Green 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - HAND-PENNED DSP (Garden Green) Other Cardstock - Basic White 5 1/4” x 4”, Garden Green and Basic White for the focal point Ink - Versa Mark and white embossing powder Other Dies - Stitched So Sweetly Adhesives - multipurpose glue, dimensionals *The greeting is from the SWEET STRAWBERRY stamp set. For the next card I stamped the floral image with Memento Tuxedo Black on Basic White cardstock, colored the image with Stampin’ Blends. I used the intricate detail die cut in Basic Black as an overlay for the floral image. SUPPLIES: Card Base - Basic White 8 1/2” x 5 1/2” scored and folded at 4 1/4” DSP - Pattern Party - black& white check Other Cardstock - Basic Black 5 1/2” x 3” plus a piece for the die cut & Basic White for the floral image Ink - Memento Tuxedo Black, Stampin’ Blends of your choice for the flower image Other - white crinkled seam binding ribbon -12-14 inches. Adhesives - multipurpose glue and dimensionals * The greeting is from HAND-PENNED PETALS Stamp the greeting with the Tuxedo Black ink toward the lower right corner of the card base. Stamp the floral image on Basic White. Use Stampin’ Blends to color the image. Die cut the image and die cut the intricate detail image. Adhere the Basic Black overlay to the floral image. Adhere the checked DSP to the Basic Black mat. Tie the crinkled seam binding ribbon around the piece on the left side, and tie a bow. Trim the ends. Adhere the piece to the card base along the top of the card. Adhere the floral piece to the card with dimensionals. This card was easy to make. It is just a Basic White intricate detail die cut colored with Stampin’ Blends. SUPPLIES: Card Base - Basic White (thick) 8 1/2” x 5 1/2” scored and folded at 4 1/4” and a piece for the die cut Ink - Soft Succulent and Stampin’ Blends (or Stampin’ Write Markers). Other: In Color Open Weave Ribbon in Soft Succulent - about 18” and Champagne Rhinestones Adhesive: multipurpose glue * The greeting is from the TIMELESS TULIPS stamp set Stamp the greeting toward the bottom center of the card. Adhere the die cut to the card. Place the rhinestones in the centers of the flowers. Tie the ribbon around the card and make a bow. Trim the ends. The card is complete! TIPS FOR ADHERING THE INTRICATE DETAIL DIES 1. Use the method I described above with the multipurpose glue. 2. Multipurpose glue and a sponge. Place the die cut face down on a silicone craft sheet (or a piece of wax paper or parchment paper). Put a dab of the glue on the craft sheet. Dip a wedge of a craft sponge in the glue. Pounce the sponge gentle over the back side of the die cut. * Stampin’ Up! discontinued the Stampin’ Sponges. A sponge dauber can be substituted. After use wash out as much of the glue as possible and let dry. I am not sure how many uses you will get from the sponge dauber. I have used the same dauber twice, and it appears I will get at least one more use from it. 3. Fine Tip Glue Pen - The tip on this glue is made for the intricate dies. The tip can become clogged if the little pin inside the lid is not inserted into the tip of the bottle correctly when putting on the lid. I use it from time to time. 4. Mini Glue Dots - Some of the intricate detail dies have areas where the mini glue dots will fit. Sometimes I cut the glue dots in half, or use the paper piercing tip of the Take Your Pick Tool to roll the glue dot over on itself (sort of fold it in half), and place the glue dot on the die cut. 5. Adhesive Sheets - peel the backing off one side of a section of an adhesive sheet. Place a piece of cardstock the same size as the adhesive sheet over the exposed adhesive. Place the die on top of the cardstock and run it through the Stampin’ Cut & Emboss Machine (or other die cut machine). Peel the adhesive off the back dice of the die cut, and place it on the mat, card base, etc. There are several other die sets in the new catalog that contain the intricate detail dies. One is the Sunflowers Dies which are found in the current Annual Catalog. The Brilliant Wings Dies, which are available now as a special promotion. Here is another look at the cards I created with the intricate detail die from the PENNED FLOWERS DIES: That is it for today. Thank you for stopping by. Until next time... Stamp Happy! Kim Are you looking for a Stampin’ Up! Demonstrator? I would be happy to be your demonstrator. Simply click one of the catalogs found in the right column of this post. This will take you to my Stampin’ Up! Web Site. Click on SHOP, and you will be shopping with me. Or go to stampinup.com, click on shop. You will be prompted to select a demonstrator. You can select a demonstrator by name (Kim Tolbert) or by town / zip code (Vevay, IN). All stamps and stamped images ©️1991-2021 Stampin’ Up!®️