The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
I suppose bonefolder to be an archetypal bookbinder’s tool. I know other artisans use them too; still, making books without a bonefolder proves to be not so comfortable and neat. There will be links to some metal and other types of folders below, but let me begin with my own story. When I started teaching bookbinding, I decided to provide all my students with a basic set of tools: folder, utility knife and a simple sewing frame. Everything to be included in the price. Understandably, I wanted to make that kit as cheap as possible without compromising the quality. Wooden Folders Utility knife is the easiest thing. Prime cost of a simple sewing frame appeared to be something about $5 (ignoring the cost of my time). Folders remained to be a problem. For my first class I’ve ordered a set of bonefolders, but that was too expensive. Whole batch amounted for almost a third of the entry price. Then I remembered that during my apprenticeship at a bookbindery many years ago we used wooden folders. Cutting one was an easy and cheap process. Less than in an hour I had a full set for my next class. Moreover, materials cost was close to nothing. The only problem: either you have to use nice strong and expensive wood, or that folder may be thrown to the trash after only ten hours of use. After series of experiments, I found the best solution. I gave a carpenter a pack of laminate flooring boards to be cut in pieces 1,5×10 cm or something like that. After I’ve got a bag with those laminate bars, I only had to sharpen them and give them to my students — they loved that thing! Bone Folders I don’t think it is needed to say much about the bone folders. There is plenty of information around. Many suppliers offer them in different shapes and sizes, including Talas or at Shepherds. Humans made bone tools from prehistoric times and some of them (including folders) are still made of bone nowadays. Folders Made Of Polymer Materials Teflon More and more craftsmen use folders made of different polymer materials. Polytetrafluoroethylene (better known as Teflon) is one them. Teflon folders are somewhat unbreakable and have that famous non-sticking surface. That also works for the glue and paint. I just have to say that many bookbinders (including myself) prefer bone folders. Sometimes without any proper reason other than them just liking it as it is. Delrin The other polymer you may use is Delrin — that’s another DuPont brand. You can find it under its ‘scientific’ names polyoxymethylene (POM), acetal, polyacetal and polyformaldehyde. And under the brand names Celcon, Ramtal, Duracon, Kepital and Hostaform. I can just cite Jeff Peachey here: After making a folder and test driving it for a while, I became a devotee. It is a great material for a folder (apologies Jim Croft) combining advantages of both bone and teflon, while not feeling plasticky and soft like Teflon. It can be shaped with hand tools. It is food compliant and impact resistant. It is used for the stock of the M16 rifle. Du Pont’s informational Delrin booklet. You can read much more (or order a Delrin folder) at his web site. Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Bakelite Once again, that’s not a new polymer at all. It was developed more than a hundred years ago. I remember my grandfather using it for some of his science radio projects many years ago. I wouldn’t ask you to remember its ‘proper’ name (polyoxybenzylmethylenglycolanhydride). First time I’ve seen it used for making folders was this July. Don Glaister (fine binder and a teacher at the American Academy of Bookbinding) told us he was using that tool for many years. That was not a standard small folder, but a larger one. I’m really thinking about making one for myself. Now you can buy Bakelite folders at my Etsy store. Photo by Bookbinding Etsy Street Team Photo by Bookbinding Etsy Street Team Metal Folders I never considered using a metal folder, but just a few weeks ago, I didn’t think about Bakelite either. Once again, I would refer you to Jeff Peachey. He made a thorough research of aluminum folders in yearly 2014: http://jeffpeachey.com/2014/01/14/the-excelsior-metal-folder/ If you want to buy a metal folder you can make and order at elbel libro (Netherlands) or at Bookmakers, Inc. (USA, look under the ‘Metal Creaser’ section). We would be glad to read about your experience with different folders (and links to other dealers and craftsmen making and selling them) in the comments below. Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
A punching trough is a tool that helps you line up your book signatures for bookbinding. I've heard people refer to it as a punching…
I suppose bonefolder to be an archetypal bookbinder’s tool. I know other artisans use them too; still, making books without a bonefolder proves to be not so comfortable and neat. There will be links to some metal and other types of folders below, but let me begin with my own story. When I started teaching bookbinding, I decided to provide all my students with a basic set of tools: folder, utility knife and a simple sewing frame. Everything to be included in the price. Understandably, I wanted to make that kit as cheap as possible without compromising the quality. Wooden Folders Utility knife is the easiest thing. Prime cost of a simple sewing frame appeared to be something about $5 (ignoring the cost of my time). Folders remained to be a problem. For my first class I’ve ordered a set of bonefolders, but that was too expensive. Whole batch amounted for almost a third of the entry price. Then I remembered that during my apprenticeship at a bookbindery many years ago we used wooden folders. Cutting one was an easy and cheap process. Less than in an hour I had a full set for my next class. Moreover, materials cost was close to nothing. The only problem: either you have to use nice strong and expensive wood, or that folder may be thrown to the trash after only ten hours of use. After series of experiments, I found the best solution. I gave a carpenter a pack of laminate flooring boards to be cut in pieces 1,5×10 cm or something like that. After I’ve got a bag with those laminate bars, I only had to sharpen them and give them to my students — they loved that thing! Bone Folders I don’t think it is needed to say much about the bone folders. There is plenty of information around. Many suppliers offer them in different shapes and sizes, including Talas or at Shepherds. Humans made bone tools from prehistoric times and some of them (including folders) are still made of bone nowadays. Folders Made Of Polymer Materials Teflon More and more craftsmen use folders made of different polymer materials. Polytetrafluoroethylene (better known as Teflon) is one them. Teflon folders are somewhat unbreakable and have that famous non-sticking surface. That also works for the glue and paint. I just have to say that many bookbinders (including myself) prefer bone folders. Sometimes without any proper reason other than them just liking it as it is. Delrin The other polymer you may use is Delrin — that’s another DuPont brand. You can find it under its ‘scientific’ names polyoxymethylene (POM), acetal, polyacetal and polyformaldehyde. And under the brand names Celcon, Ramtal, Duracon, Kepital and Hostaform. I can just cite Jeff Peachey here: After making a folder and test driving it for a while, I became a devotee. It is a great material for a folder (apologies Jim Croft) combining advantages of both bone and teflon, while not feeling plasticky and soft like Teflon. It can be shaped with hand tools. It is food compliant and impact resistant. It is used for the stock of the M16 rifle. Du Pont’s informational Delrin booklet. You can read much more (or order a Delrin folder) at his web site. Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Bakelite Once again, that’s not a new polymer at all. It was developed more than a hundred years ago. I remember my grandfather using it for some of his science radio projects many years ago. I wouldn’t ask you to remember its ‘proper’ name (polyoxybenzylmethylenglycolanhydride). First time I’ve seen it used for making folders was this July. Don Glaister (fine binder and a teacher at the American Academy of Bookbinding) told us he was using that tool for many years. That was not a standard small folder, but a larger one. I’m really thinking about making one for myself. Now you can buy Bakelite folders at my Etsy store. Photo by Bookbinding Etsy Street Team Photo by Bookbinding Etsy Street Team Metal Folders I never considered using a metal folder, but just a few weeks ago, I didn’t think about Bakelite either. Once again, I would refer you to Jeff Peachey. He made a thorough research of aluminum folders in yearly 2014: http://jeffpeachey.com/2014/01/14/the-excelsior-metal-folder/ If you want to buy a metal folder you can make and order at elbel libro (Netherlands) or at Bookmakers, Inc. (USA, look under the ‘Metal Creaser’ section). We would be glad to read about your experience with different folders (and links to other dealers and craftsmen making and selling them) in the comments below. Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
I suppose bonefolder to be an archetypal bookbinder’s tool. I know other artisans use them too; still, making books without a bonefolder proves to be not so comfortable and neat. There will be links to some metal and other types of folders below, but let me begin with my own story. When I started teaching bookbinding, I decided to provide all my students with a basic set of tools: folder, utility knife and a simple sewing frame. Everything to be included in the price. Understandably, I wanted to make that kit as cheap as possible without compromising the quality. Wooden Folders Utility knife is the easiest thing. Prime cost of a simple sewing frame appeared to be something about $5 (ignoring the cost of my time). Folders remained to be a problem. For my first class I’ve ordered a set of bonefolders, but that was too expensive. Whole batch amounted for almost a third of the entry price. Then I remembered that during my apprenticeship at a bookbindery many years ago we used wooden folders. Cutting one was an easy and cheap process. Less than in an hour I had a full set for my next class. Moreover, materials cost was close to nothing. The only problem: either you have to use nice strong and expensive wood, or that folder may be thrown to the trash after only ten hours of use. After series of experiments, I found the best solution. I gave a carpenter a pack of laminate flooring boards to be cut in pieces 1,5×10 cm or something like that. After I’ve got a bag with those laminate bars, I only had to sharpen them and give them to my students — they loved that thing! Bone Folders I don’t think it is needed to say much about the bone folders. There is plenty of information around. Many suppliers offer them in different shapes and sizes, including Talas or at Shepherds. Humans made bone tools from prehistoric times and some of them (including folders) are still made of bone nowadays. Folders Made Of Polymer Materials Teflon More and more craftsmen use folders made of different polymer materials. Polytetrafluoroethylene (better known as Teflon) is one them. Teflon folders are somewhat unbreakable and have that famous non-sticking surface. That also works for the glue and paint. I just have to say that many bookbinders (including myself) prefer bone folders. Sometimes without any proper reason other than them just liking it as it is. Delrin The other polymer you may use is Delrin — that’s another DuPont brand. You can find it under its ‘scientific’ names polyoxymethylene (POM), acetal, polyacetal and polyformaldehyde. And under the brand names Celcon, Ramtal, Duracon, Kepital and Hostaform. I can just cite Jeff Peachey here: After making a folder and test driving it for a while, I became a devotee. It is a great material for a folder (apologies Jim Croft) combining advantages of both bone and teflon, while not feeling plasticky and soft like Teflon. It can be shaped with hand tools. It is food compliant and impact resistant. It is used for the stock of the M16 rifle. Du Pont’s informational Delrin booklet. You can read much more (or order a Delrin folder) at his web site. Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Bakelite Once again, that’s not a new polymer at all. It was developed more than a hundred years ago. I remember my grandfather using it for some of his science radio projects many years ago. I wouldn’t ask you to remember its ‘proper’ name (polyoxybenzylmethylenglycolanhydride). First time I’ve seen it used for making folders was this July. Don Glaister (fine binder and a teacher at the American Academy of Bookbinding) told us he was using that tool for many years. That was not a standard small folder, but a larger one. I’m really thinking about making one for myself. Now you can buy Bakelite folders at my Etsy store. Photo by Bookbinding Etsy Street Team Photo by Bookbinding Etsy Street Team Metal Folders I never considered using a metal folder, but just a few weeks ago, I didn’t think about Bakelite either. Once again, I would refer you to Jeff Peachey. He made a thorough research of aluminum folders in yearly 2014: http://jeffpeachey.com/2014/01/14/the-excelsior-metal-folder/ If you want to buy a metal folder you can make and order at elbel libro (Netherlands) or at Bookmakers, Inc. (USA, look under the ‘Metal Creaser’ section). We would be glad to read about your experience with different folders (and links to other dealers and craftsmen making and selling them) in the comments below. Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
One of the most overlooked aspects I see from amateur bookbinders is their choice of adhesives or glue; many of whom rely on PVA as a ‘one-glue-fits-all’ solution. Whilst PVA is a good option for many aspects in bookbinding it almost certainly shouldn’t be used over other more suitable adhesives. Yes, I agree that personal […]
I suppose bonefolder to be an archetypal bookbinder’s tool. I know other artisans use them too; still, making books without a bonefolder proves to be not so comfortable and neat. There will be links to some metal and other types of folders below, but let me begin with my own story. When I started teaching bookbinding, I decided to provide all my students with a basic set of tools: folder, utility knife and a simple sewing frame. Everything to be included in the price. Understandably, I wanted to make that kit as cheap as possible without compromising the quality. Wooden Folders Utility knife is the easiest thing. Prime cost of a simple sewing frame appeared to be something about $5 (ignoring the cost of my time). Folders remained to be a problem. For my first class I’ve ordered a set of bonefolders, but that was too expensive. Whole batch amounted for almost a third of the entry price. Then I remembered that during my apprenticeship at a bookbindery many years ago we used wooden folders. Cutting one was an easy and cheap process. Less than in an hour I had a full set for my next class. Moreover, materials cost was close to nothing. The only problem: either you have to use nice strong and expensive wood, or that folder may be thrown to the trash after only ten hours of use. After series of experiments, I found the best solution. I gave a carpenter a pack of laminate flooring boards to be cut in pieces 1,5×10 cm or something like that. After I’ve got a bag with those laminate bars, I only had to sharpen them and give them to my students — they loved that thing! Bone Folders I don’t think it is needed to say much about the bone folders. There is plenty of information around. Many suppliers offer them in different shapes and sizes, including Talas or at Shepherds. Humans made bone tools from prehistoric times and some of them (including folders) are still made of bone nowadays. Folders Made Of Polymer Materials Teflon More and more craftsmen use folders made of different polymer materials. Polytetrafluoroethylene (better known as Teflon) is one them. Teflon folders are somewhat unbreakable and have that famous non-sticking surface. That also works for the glue and paint. I just have to say that many bookbinders (including myself) prefer bone folders. Sometimes without any proper reason other than them just liking it as it is. Delrin The other polymer you may use is Delrin — that’s another DuPont brand. You can find it under its ‘scientific’ names polyoxymethylene (POM), acetal, polyacetal and polyformaldehyde. And under the brand names Celcon, Ramtal, Duracon, Kepital and Hostaform. I can just cite Jeff Peachey here: After making a folder and test driving it for a while, I became a devotee. It is a great material for a folder (apologies Jim Croft) combining advantages of both bone and teflon, while not feeling plasticky and soft like Teflon. It can be shaped with hand tools. It is food compliant and impact resistant. It is used for the stock of the M16 rifle. Du Pont’s informational Delrin booklet. You can read much more (or order a Delrin folder) at his web site. Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Bakelite Once again, that’s not a new polymer at all. It was developed more than a hundred years ago. I remember my grandfather using it for some of his science radio projects many years ago. I wouldn’t ask you to remember its ‘proper’ name (polyoxybenzylmethylenglycolanhydride). First time I’ve seen it used for making folders was this July. Don Glaister (fine binder and a teacher at the American Academy of Bookbinding) told us he was using that tool for many years. That was not a standard small folder, but a larger one. I’m really thinking about making one for myself. Now you can buy Bakelite folders at my Etsy store. Photo by Bookbinding Etsy Street Team Photo by Bookbinding Etsy Street Team Metal Folders I never considered using a metal folder, but just a few weeks ago, I didn’t think about Bakelite either. Once again, I would refer you to Jeff Peachey. He made a thorough research of aluminum folders in yearly 2014: http://jeffpeachey.com/2014/01/14/the-excelsior-metal-folder/ If you want to buy a metal folder you can make and order at elbel libro (Netherlands) or at Bookmakers, Inc. (USA, look under the ‘Metal Creaser’ section). We would be glad to read about your experience with different folders (and links to other dealers and craftsmen making and selling them) in the comments below. Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
A punching trough is a tool that helps you line up your book signatures for bookbinding. I've heard people refer to it as a punching…
This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it.This work is in the \"public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
This blog post was originally going to be about the different types of rulers and why some are better than others for book folding. But the more I thought about it, the more I realised that it's the accuarcy that a ruler can help us to achieve that's the important thing here, not the ruler itself. So I decided to broaden the subject to include other factors that influence accuracy. Read on and I'll share what I have learned so far in my quest for the perfect book fold. Clear Your Workspace of
The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
I suppose bonefolder to be an archetypal bookbinder’s tool. I know other artisans use them too; still, making books without a bonefolder proves to be not so comfortable and neat. There will be links to some metal and other types of folders below, but let me begin with my own story. When I started teaching bookbinding, I decided to provide all my students with a basic set of tools: folder, utility knife and a simple sewing frame. Everything to be included in the price. Understandably, I wanted to make that kit as cheap as possible without compromising the quality. Wooden Folders Utility knife is the easiest thing. Prime cost of a simple sewing frame appeared to be something about $5 (ignoring the cost of my time). Folders remained to be a problem. For my first class I’ve ordered a set of bonefolders, but that was too expensive. Whole batch amounted for almost a third of the entry price. Then I remembered that during my apprenticeship at a bookbindery many years ago we used wooden folders. Cutting one was an easy and cheap process. Less than in an hour I had a full set for my next class. Moreover, materials cost was close to nothing. The only problem: either you have to use nice strong and expensive wood, or that folder may be thrown to the trash after only ten hours of use. After series of experiments, I found the best solution. I gave a carpenter a pack of laminate flooring boards to be cut in pieces 1,5×10 cm or something like that. After I’ve got a bag with those laminate bars, I only had to sharpen them and give them to my students — they loved that thing! Bone Folders I don’t think it is needed to say much about the bone folders. There is plenty of information around. Many suppliers offer them in different shapes and sizes, including Talas or at Shepherds. Humans made bone tools from prehistoric times and some of them (including folders) are still made of bone nowadays. Folders Made Of Polymer Materials Teflon More and more craftsmen use folders made of different polymer materials. Polytetrafluoroethylene (better known as Teflon) is one them. Teflon folders are somewhat unbreakable and have that famous non-sticking surface. That also works for the glue and paint. I just have to say that many bookbinders (including myself) prefer bone folders. Sometimes without any proper reason other than them just liking it as it is. Delrin The other polymer you may use is Delrin — that’s another DuPont brand. You can find it under its ‘scientific’ names polyoxymethylene (POM), acetal, polyacetal and polyformaldehyde. And under the brand names Celcon, Ramtal, Duracon, Kepital and Hostaform. I can just cite Jeff Peachey here: After making a folder and test driving it for a while, I became a devotee. It is a great material for a folder (apologies Jim Croft) combining advantages of both bone and teflon, while not feeling plasticky and soft like Teflon. It can be shaped with hand tools. It is food compliant and impact resistant. It is used for the stock of the M16 rifle. Du Pont’s informational Delrin booklet. You can read much more (or order a Delrin folder) at his web site. Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Bakelite Once again, that’s not a new polymer at all. It was developed more than a hundred years ago. I remember my grandfather using it for some of his science radio projects many years ago. I wouldn’t ask you to remember its ‘proper’ name (polyoxybenzylmethylenglycolanhydride). First time I’ve seen it used for making folders was this July. Don Glaister (fine binder and a teacher at the American Academy of Bookbinding) told us he was using that tool for many years. That was not a standard small folder, but a larger one. I’m really thinking about making one for myself. Now you can buy Bakelite folders at my Etsy store. Photo by Bookbinding Etsy Street Team Photo by Bookbinding Etsy Street Team Metal Folders I never considered using a metal folder, but just a few weeks ago, I didn’t think about Bakelite either. Once again, I would refer you to Jeff Peachey. He made a thorough research of aluminum folders in yearly 2014: http://jeffpeachey.com/2014/01/14/the-excelsior-metal-folder/ If you want to buy a metal folder you can make and order at elbel libro (Netherlands) or at Bookmakers, Inc. (USA, look under the ‘Metal Creaser’ section). We would be glad to read about your experience with different folders (and links to other dealers and craftsmen making and selling them) in the comments below. Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
We’ve been asked to add this item to our stock for quite a long time. And finally, that moment came. From now on, we offer this signature punching cradle with a guide for an awl at our Etsy shop. However, the basic design is only the beginning, as we plan to add more versions of the tool soon, adding some functionality. To take it one more step further, we played a bit with the basic design, to make it a bit more attractive. Here is the render of the result: What do you think? Should we update the item with this design? Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
Besides making books and teaching, bookbinding tools are one of my passions. Ten years ago, I’ve made my first presses, sewing frames and wooden folders. That happened almost simultaneously with binding my first book. My carpentry-meets-bookbinding experience had a passed through a vigorous revival period in 2015. I’ve started my own bookbinding courses then and decided to make a set of simple tools (including a sewing frame) for each of my students. I don’t think it would be a mistake to say that I’ve made more than a hundred sewing frames since that moment. Making bookbinding tools is always an evolutionary process for me. I learn new carpentry tricks, acquire new power tools and invent new small improvements to the tools I am already selling at my Etsy store. That’s exactly what happened with my Small Press. That’s a really primitive structure comprised of two boards, two thick steel rods and several large nuts. You need pliers to tighten that press, which is not very convenient. However, this allows lowering the price of the tool while keeping it durable and with high grip strength. For some time now, I have two larger presses to offer. They have two nuts embedded in one of the cheeks. That allows the press to be tightened with handles only. Exactly like the traditional presses with wooden rods. To accommodate a wooden rod you have to make screw threads inside one of the cheeks. It is possible to do the same for the steel rod, but I wanted to find some other solution. And it happened to be embedded steel nuts! One of the parameters that influences the final price is time spent on producing each tool. Usually materials are not as expensive as labor (it is often the same with bookbinding). If I decided to make the Small Press similar to the Large Press, it wouldn’t be much cheaper. The main difference would be the price of four additional 2-cantimeter-thick plywood boards. Therefore, I had to make my work more effective without losing structural quality of the press. Recently, I had to fulfill several orders on Simple Presses and I’ve decided to offer my clients a free upgrade. This gave me a chance to save my time working several similar projects at once and, at the same moment, experiment a bit with a new structure. Here is my new Simple Press #3. Of course, it is not strong as the Large Press. However, it is cheap, strong enough and convenient in use. Hope to receive some reviews from my clients and some input from the community on how to improve the structure. That’s how the flange nuts are fixed inside one of the cheeks: Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
I suppose bonefolder to be an archetypal bookbinder’s tool. I know other artisans use them too; still, making books without a bonefolder proves to be not so comfortable and neat. There will be links to some metal and other types of folders below, but let me begin with my own story. When I started teaching bookbinding, I decided to provide all my students with a basic set of tools: folder, utility knife and a simple sewing frame. Everything to be included in the price. Understandably, I wanted to make that kit as cheap as possible without compromising the quality. Wooden Folders Utility knife is the easiest thing. Prime cost of a simple sewing frame appeared to be something about $5 (ignoring the cost of my time). Folders remained to be a problem. For my first class I’ve ordered a set of bonefolders, but that was too expensive. Whole batch amounted for almost a third of the entry price. Then I remembered that during my apprenticeship at a bookbindery many years ago we used wooden folders. Cutting one was an easy and cheap process. Less than in an hour I had a full set for my next class. Moreover, materials cost was close to nothing. The only problem: either you have to use nice strong and expensive wood, or that folder may be thrown to the trash after only ten hours of use. After series of experiments, I found the best solution. I gave a carpenter a pack of laminate flooring boards to be cut in pieces 1,5×10 cm or something like that. After I’ve got a bag with those laminate bars, I only had to sharpen them and give them to my students — they loved that thing! Bone Folders I don’t think it is needed to say much about the bone folders. There is plenty of information around. Many suppliers offer them in different shapes and sizes, including Talas or at Shepherds. Humans made bone tools from prehistoric times and some of them (including folders) are still made of bone nowadays. Folders Made Of Polymer Materials Teflon More and more craftsmen use folders made of different polymer materials. Polytetrafluoroethylene (better known as Teflon) is one them. Teflon folders are somewhat unbreakable and have that famous non-sticking surface. That also works for the glue and paint. I just have to say that many bookbinders (including myself) prefer bone folders. Sometimes without any proper reason other than them just liking it as it is. Delrin The other polymer you may use is Delrin — that’s another DuPont brand. You can find it under its ‘scientific’ names polyoxymethylene (POM), acetal, polyacetal and polyformaldehyde. And under the brand names Celcon, Ramtal, Duracon, Kepital and Hostaform. I can just cite Jeff Peachey here: After making a folder and test driving it for a while, I became a devotee. It is a great material for a folder (apologies Jim Croft) combining advantages of both bone and teflon, while not feeling plasticky and soft like Teflon. It can be shaped with hand tools. It is food compliant and impact resistant. It is used for the stock of the M16 rifle. Du Pont’s informational Delrin booklet. You can read much more (or order a Delrin folder) at his web site. Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Photo by Jeff Peachey (CC BY-NC) Bakelite Once again, that’s not a new polymer at all. It was developed more than a hundred years ago. I remember my grandfather using it for some of his science radio projects many years ago. I wouldn’t ask you to remember its ‘proper’ name (polyoxybenzylmethylenglycolanhydride). First time I’ve seen it used for making folders was this July. Don Glaister (fine binder and a teacher at the American Academy of Bookbinding) told us he was using that tool for many years. That was not a standard small folder, but a larger one. I’m really thinking about making one for myself. Now you can buy Bakelite folders at my Etsy store. Photo by Bookbinding Etsy Street Team Photo by Bookbinding Etsy Street Team Metal Folders I never considered using a metal folder, but just a few weeks ago, I didn’t think about Bakelite either. Once again, I would refer you to Jeff Peachey. He made a thorough research of aluminum folders in yearly 2014: http://jeffpeachey.com/2014/01/14/the-excelsior-metal-folder/ If you want to buy a metal folder you can make and order at elbel libro (Netherlands) or at Bookmakers, Inc. (USA, look under the ‘Metal Creaser’ section). We would be glad to read about your experience with different folders (and links to other dealers and craftsmen making and selling them) in the comments below. Please Support us on Patreon! The minimum level of contribution is only $1 per month. Pledges received from our patrons cover the editing services for our bookish podcast! Moreover, starting with the pledge level of $3, you will get a digitized vintage book about bookbinding, book history, or book arts each month from us! These pledges help iBookBinding to continue its work and bring more information about bookbinding and book arts to you! Share this page:
We can do any size backdrops and accept custom backdrops with no extra charge. Welcome to share your backdrop photos by tag #Starbackdrop on INSTAGRAM or FACEBOOK. Material The material is polyester microfiber cloth. Compared with other materials, this new type microfiber is soft and seamless, the muslin thick fabric is also characterized by printed bright colors and lightweight. Clean The backdrop can be washed and ironed by a dryer if the backdrop is dirty or wrinkled. They are soft, washable, durable. You can iron them at a low temperature or throw them in the washer and dryer to get rid of creases. Cleaning is easy! Hang There is a pocket on the top that you can use for hanging. (If you don't need a pocket, please remark when you place an order. You can also note your request for your order.) Star backdrops can be used many times, so you do not need to make repeated purchases. Product Note: 1. Due to facilitate transport and package, please wash or iron it if wrinkled. 2. Computer screens vary in color calibration, there may be differences between real and pictures. 3. Our package contains ONLY backdrops folded, no stands or clips. Don't have a stand to hang backdrops? Click HERE Not only the size can be customized, we can also customize your own design for you. Please feel free to contact us. How to order your custom backdrops? Step1: Click Custom Backdrops. Step2: Upload your own pictures or logo by clicking the bottom "Choose image". Step3: Add this item to your cart and submit. We will deal with it as soon as possible. If you have any questions, please contact us by email: [email protected]
和装本 JAPANESE BOOKBINDING JADE BOOKBINDING STUDIO has created five workshops in Japanese Bookbinding. During the series of workshops, students will be introduced to three classic styles of Japanese Bookbinding, one box making and one workshop in KARIBARI making (please see workshop E). Traditional Japanese tools, papers, fabrics, and construction techniques will be used, allowing students to gain as much knowledge as possible, in this most exquisite form of regional bookbinding. The various workshops are open to anyone, no prior knowledge of bookbinding is necessary . Japanese Bookbinding is a perfect introduction to the craft of bookbinding, whilst providing a refreshing alternative for the more advanced student of bookbinding. The workshop fees include all materials, tuition (in English and Japanese), use of hand tools, and when necessary, use of workshop equipment. A. 袋綴 FUKURO TOJI [Four Hole Binding ] つばくろ TUBAKURO [ Wraparound Case ] The FUKURO TOJI is considered by many as the classic form of Japanese Bookbinding. Students will be able to make two variations, one being the basic four hole binding, the other concentrating on a more decorative sewing pattern. The TSUBAKURO is the ideal protective case for the FUKURO TOJO books, though simple in form, the Tsubakuro has many other applications Materials : covering paper / corner pieces / text block papers / silk binding thread /paper thread / title strip / Japanese paper lining cloth / flat tape B. 箱秩 HAKO CHITSU [ Box Case ] This is a two days workshop. This style of box provides ideal storage for various sizes, shapes of books and papers. The basic construction is a wraparound enclosure with a 4 sided box and it contains a lift out tray. Materials : boards / covering cloth / lining papers / clasps / fastening cloth / flat tapes / supporting hinge paper / title strip C. 結び綴 MUSUBI TOJI - Hard Cover- The MUSUBI TOJI is one of the true forms of Japanese Book, with construction details differing from Korean or Chinese influenced Bookbinding methods. The MUSUBI TOJI is unique, in that the same binding method can be used for both "limp" and "hard" bindings. Participants will be making the “hard” variations , using traditional materials and binding methods. Materials : boards / covering cloth / corner pieces / text block papers / flat tapes /paper thread / title strip D. 糊入れ画帖 NORI-IRE GAJO [Album] 伸びる画帖 NOBIRU GAJO [Double Leaved Album ] There are innumerable variations on the accordion or concertina style of book form. This workshop concentrates on two styles of the book form that are not commonly taught in Europe. Each is separate but both are based on folded paper. The Nori-ire-gajo is constructed from single folios whilst the Nobiru gajo uses double folds of paper. Though looking deceptively simple, the devil is in the detail. During the workshop the student will be able to learn two ways of traditional cushioned boards, folding and construction. Materials : board / covering paper / board paper / text block / cushion materials E. 裏打 URAUCHI [ Lamination techniques ] 仮張 KARIBARI [ Drying Board ] In many cases, the cloth and paper used in Japanese bookbinding and box making are usually backed with tissue paper. This lamination technique is called URAUCHI and uses a specialist drying board called the KARIBARI . The KARIBARI is very versatile and can be used for various projects found in western bookbinding techniques. Students will able to make a KARIBARI and will be able to practice variations of URAUCHI. Materials : cloth / paper/ Japanese tissue paper/ wooden frame / Japanese plain paper /varnish FEE ONE DAY WORKSHOP Workshop A. Fukuro toji & Tsubakuro £ 105-00 Workshop C. Musubi toji £ 105-00 Workshop D. Nori-ire Gajo & Nobiru Gajo £ 105-00 Workshop E. Urauchi & Karibari £ 150-00 TWO DAYS WORKSHOP Workshop B. Hako Chitsu £ 220-00 Fee includes all materials, use of Japanese hand tools and studio equipment. (Pattern and coloure of materials may not be exactly same as the photographs) If students have specific projects a separate fee may be negotiated.
A tool designed to capture brass or printing type that are to be embossed or gold plated on the surface of a book or other object. The type is tightened one-sided with a screw placed at the end of the type holder. In order to get the centering of the inscription, use spacing material. The length of the working part is 10 cm, The height of the sign: Type Holder 3 – 3mm [~8pt] Type Holder 4 - 4mm [~10pt] Type Holder 5 – 5mm [~13pt] Type Holder 6 - 6mm [~16pt] Type Holder 7 - 7mm [~18pt] Type Holder 8 - 8mm [~20pt] Type Holder 9 - 9mm [~24pt] Type Holder 10 - 10mm [~26pt] Due to the hand-made nature of the product, individual tools may slightly differ from each other. If your country isn't mentioned in the delivery options, you can ask me about it. Cost of shipping is set individually for each country
The Internet is full of different types of bookbinding tutorials - some more detailed than others, some written by bookbinders and some by enthusiastic hobbyist. What they usually have in common that they still focus on giving out instructions for one specific project. Today I hope to give you a few
A punching trough is a tool that helps you line up your book signatures for bookbinding. I've heard people refer to it as a punching…
O tecido caligrafado foi um achado da cliente. Muito legal! Tamanho: 25 x 20 cm Papel Rives off white 120 g/m2 Encadernação com linha de linho francesa, the best! Fechamento com fita de couro
Recently came across my old "paper stack" how to in American Miniaturists Magazine. It was from 2003!! Boy I have been doing this awhile.. You can tell some of the photos are not the greatest. Taken with my old digital camera that used a 3.5" floppy. LOL.... Thought I would share some of my favorite scrolls and paper bundles form my past.. I need to make a few of these for my book shop too.. I also realize I really need to invest in a new photo prop design.. I always liked how the document above turned out, The writing is gold embossed..
Today began like any other day; one where I’m surrounded by things I ought to do on one side, and things I want to do on the other. In the middle of my procrastination (actually I’m s…
Hoy os voy a presentar la encuadernación belga secreta. Este tipo de encuadernación es muy reciente, especialmente en comparación...
Today began like any other day; one where I’m surrounded by things I ought to do on one side, and things I want to do on the other. In the middle of my procrastination (actually I’m s…
.css-1sgivba{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;gap:0.5rem;margin-bottom:var(--chakra-space-2);} .css-cosgki{font-size:16px;font-weight:var(--chakra-fontWeights-bold);} Product Type: Giclee Print Print Size: 9" x 12" Finished Size: 9" x 12" .css-1336n79{display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;gap:0.5rem;margin-top:var(--chakra-space-8);margin-bottom:var(--chakra-space-8);} Product ID: 55963754778A