Anna Griffin® Falloween Gift Card Holder Set Add a little "WOW" factor to your gift cards than with a handmade holder. Use the owl, pumpkin or turkey for Halloween or Thanksgiving gift cards. They're so easy to make. Just cut, assemble, embellish and you're done. What You Get 7 Dies; largest approx. 4.99"x 5.62" Idea sheet Good to Know For use with Anna Griffin Empress and Empress Large Plates required (sold separately)
Stamperia Christmas Collections are in stock at The Funkie Junkie Boutique! Good morning and happy Saturday!! Maggi here to share a couple of cards suitable for mailing and a tag that will make your gift extra special. Stamperia has several gorgeous Christmas collections that look so vintage, you're going to love them! Some of Stamperia's collections are done in traditional colors, while others are more Victorian. You can find all of these collections at The Funkie Junkie Boutique. I have 3 tutorials for you using two two of their Christmas collections, Pink Christmas and Christmas Vintage. This is a long post with lots of photos so grab your favorite beverage and snack and read on! A Card with Stamperia's Pink Christmas Pink Christmas is a beautiful vintage collection done in Victorian colors of teal, pinks and rose. The collection is made up of gorgeous images that are perfect for fussy cutting. Note: Ink all the papers if you wish. I used Distress Ink in Worn Lipstick and Iced Spruce. Pink Christmas Card Tutorial - Step 1: Locate and trim out the roses, deer and candle images shown below from the 12 x 12 Stamperia Pink Christmas paper pack. Trim the candle cut-apart o 3 3/4" x 5 5/8". Note that I used a scalloped circle die to diecut the pink roses paper but it would look just as great to fussy cut it out in a circle shape. Cut a 3 7/8" diameter circle from the pink print paper. Cut a 2" x 1" flap from cream cardstock and fold in half. Glue one side of the flap to the back of the circle as shown below. Step 2: Adhere the cream flap to the backside of the candle image as shown in the 1st photo so that the circle folds over the candle image as shown in the 2nd photo below. Glue the roses image to the outside of the circle. (Not shown) Step 3: Open the flap out and adhere the deer image on the inside as shown below. Step 4: Cut a border strip from silver paper with the Mini Scalloped Impresslits Embossing Folder. Lightly ink with Stonewashed alcohol ink. Step 5: Cut a green card base 9 1/2" x 6 3/8" and score at 4 3/4". Cut a teal floral layer 4 1/4" x 6". Adhere the border strip from Step 4 over the right edge of the blue floral layer as shown so that it's edge is just beneath the candle cut-apart layer. Then adhere the candle and circle assembly over the blue floral layer. Step 6: Cut a 4 1/8" x 5 7/8" piece of design paper as shown below and adhere to the inside of the card. That's it! This is such a pretty card that is flat and therefore suitable for mailing. If you don't plan to mail the card, you can add some flowers to the front of the card making it even more stunning! Gift tag with Stamperia Pink Christmas Pink Christmas Gift Tag Tutorial - Step 1: We'll use a large ivory Graphic 45 tag as the base for this tag. Die-cut a pink floral tag using Graphic 45's large tag die from the Stamperia Pink Christmas 12 x 12 collection. Notice the blank space between the top and bottom of the pink die-cut. Well, I am really miserly with my papers so for this tag I used a scrap of paper that was shorter than the length of the tag. Since the center of the tag is going to be covered with other paper, that is ok! So, I just die-cut a short tag, cut 2" off the bottom and rounded the corners. Then I adhered the small piece to the bottom and the larger piece to the top. Cut a 3 3/4" piece of Venetian lace and adhere over the pink paper at the bottom. (Ink the edges of the papers for this tag as desired with Distress Ink in Tattered Rose and Iced Spruce.) Step 2: Next cut a piece of teal paper as shown 3 3/4" x 3 1/2". If you have a border punch, punch the bottom as shown and adhere to the tag so that it just laps over the top of the lace. Step 3: Next cut out the square "for you" cut-apart shown and the circular Merry Christmas cut-apart. I used scalloped dies to cut both the square and circle but it is not necessary to use a die. Trimming with scissors will look great too! Now cut two 4" circles. (Again, I used a die to cut mine but just a plain 4" circle will look great too.) Notice that one of my circles is just part of a circle. Well, I only had a little piece of cardstock that I thought matched nicely with the papers so I just made it work! The missing part of the circle isn't needed anyway! I applied embossing ink around the edges of the two circles, sprinkled with Emerald Creek Soft Fallen Snow embossing powder and heated. Step 4: Adhere a circle at the top left. Then position the square cut-apart over the circle and use foam dimensional tape to adhere over the circle. Use foam dimensional tape to pop up the 2nd circle and position as shown in the photo. Add the Merry Christmas circular cut-apart, using foam dimensional tape to pop it up. Step 5: Select 3 Tim Holtz Christmas Typed Tokens and dab with a white paint dabber, being sure to get white paint embedded in the lettering. Then wipe the paint from the surface so that just the words are white. Adhere at the bottom of the tag as shown below. Use tiny pearls to cover the holes. Step 6: Add some small flowers around the circular cut-apart and a white seam binding bow at the top. That's all there is to it. The recipient of a gift adorned with this tag will feel extra special! Easel Gift Card Holder with Stamperia's Vintage Christmas This last card is made with the Vintage Christmas collection which is done in more traditional Christmas colors and images. I love the holly sprigs, bells, and Christmas trees sprinkled throughout the collection. The card is an easel card with a twist. Not only does it have an easel but it opens up like a traditional card and has a place to tuck in cash or a gift card. Vintage Christmas Easel Card Tutorial - Step 1: Cut a 8" x 12" piece of red cardstock. Score horizontally at 6" and vertically at 4". Step 2: Cut out the upper left rectangle along the score lines as shown in the photo below. Keep the cut out rectangle as we'll use it in Step 4. Step 3: Fold as shown below. Step 4: The red rectangle pictured below is the piece we cut out in Step 2. Cut a 3 7/8" x 5 7/8" rectangle from green snowy paper, (top right). Locate the cut-apart shown and trim out. Cut a rectangle (I used a scalloped die) from the red with trees paper 2 3/4" x 4" and trim out the birds tag shown below. Step 5: Score the red cardstock flap at 3" and fold up as shown in the photo and set aside. Layer and adhere the green snowy paper over the red cardstock. Next adhere the cut-apart with the bells over the green snowy paper. Use dimensional foam tape to adhere the next layer, the red with trees. Adhere the final layer, the birds tag. Now, adhere this assembly to the face of the folded piece by adhering the top 3" of the layered piece to the 3" face of the folded up piece. (See the 3rd photo in Step 6.) Step 6: Cut a piece 3 3/4" x 5 3/4" and adhere underneath the flap. (This is the bottom right corner of the card if the cardstock is laid out flat.) Cut out the tag shown below and adhere about 1 1/4" from the bottom of the card and centered. This is how the easel mechanism should look. Step 7: Cut a piece 3 3/4" x 5 5/8" from the blue snowy paper and round the corners if you wish. Cut out the Christmas tree (round the corners if you wish) and the circular Greetings cut-aparts shown. Step 8: Open the card such that the easel mechanism is on the left and the card opens in the traditional manner. Adhere the tree cut-apart to the right side and adhere the snowy paper to the left side. Put adhesive on the back of the circle cut-apart around the edges but leaving enough room at the top so that cash or a gift card can slide inside. Detail the berries on the holly sprigs with Stickles to add a sparkly element to the card. That's it, all finished! The front of the card forms a pretty easel allowing the recipient to display this unique card for all to see. Inside the card there's lots of room for a personal message and a gift card too. Thanks so much for joining me for this long post!! I hope these tutorials give you some ideas for all your Christmas craft cards, tags and projects! Supplies from The Funkie Junkie Boutique Stamperia Pink Christmas Stamperia Christmas Vintage (MAY PRE-ORDER) Sizzix 3-D Impresslits Embossing Folder - Mini Scallop Ranger Adirondack Alcohol Ink - Stonewashed Ranger Tim Holtz Distress Ink Pad - Worn Lipstick Ranger Tim Holtz Distress Ink Pad - Iced Spruce Ranger Tim Holtz Distress Ink Pad - Tattered Rose Ranger Tim Holtz Mini Distress Ink Pad - Fired Brick Graphic 45 Large Tag Album Ivory Graphic 45 Staples Large Tag and Flowers Dies Ranger Tim Holtz Distress Embossing Ink Reinker Soft Fallen Snow embossing powder Venise Lace Trim - 2 inches (September Pre-Order) Tim Holtz Idea-ology Tokens, Christmas KAISERCRAFT Pearls - Self Adhesive - Blush Seam Binding Seasonal Stickles Assortment - Holiday Ranger ADHESIVE - WHITE FOAM ROLL 1/2" X 1/16"x 2.1 YDS. Ranger Tim Holtz Distress Ink Pad - Brushed Corduroy Tim Holtz Tonic Studios Mini Scissors
Hello, Friends! Have you started your Halloween crafting yet? When I got my September Ribbon Club Assortment in the mail, it put me into high gear for Halloween creations. Those ribbons are spook-tacular! Today I've used them to dress up these cutie pie Halloween Gift Card Holders. These are super quick and easy to make, yet they look fabulously festive thanks to the wonderful ribbons. This Boo-tiful card is dressed up with the 3/8" Halloween Confetti Dot Grosgrain Ribbon and some of my favorite Natural Burlap String. A little 3/8" Black Checkerboard Satin ribbon adds a touch of class to the gift card holder inside the card. This fab-BOO-luss card is adorned with Tangerine Checkerboard Satin Ribbon. I love the soft shimmer it adds to the card design. And I love the fun factor that the Halloween Confetti Dot Ribbon adds to the gift card holder inside this card. Tangerine Satin Swirl Ribbon is postively "bewitching" when paired with Black Checkerboard Satin Ribbon, don't you think? And this black cat is lucky to be paired up with 3/8" Black Checkerboard Satin Ribbon. This too cute to spook witch is color coordinated with the Tangerine Satin Swirl bow on this card. And I'm loving this 3/8" Spiderweb Satin Ribbon with these papers. If you'd like to make these cute cards, I prepared a little Snapguide tutorial for you! Happy Halloween! Check out How to Authentique Nightfall Halloween Gift Card Holders by Kathy Clement on Snapguide. Thanks so much for stopping by! Cheerio, kathy
Project Details Stamps By The Tide & Fall Foilage Card Stock & Papers Whisper White, Pool Party, Island Indigo Ink Pool Party, Island Indigo, Crushed Curry Accessories Dazzling Details, Rhinestones Basic Jewels Tools Fancy Fan embossing folder, Circle die cut, I saw something similar to this a while back on the net. I made this using the tools I had and worked with measurements on the curved cuts and triangle etc. I made some others with tiny colored buttons. I used the Essentials Paper Piercing Pack along with the Adorning Accents edgelits to make the trim on the sweater and on the shirt. Project Details Stamps none Card Stock & Papers Whisper White, Blushing Bride, Twitterpated dsp. Ink Accessories Pearls Basic Jewels, Vintage Faceted designer buttons Tools Argyle embossing folder, Adorning Accents edgelits, Paper Piercing tools, Stampin’ Scorer
Welcome to Anna Griffin's blog! This is the place where Anna shares the things she loves, her inspirations, and what she's up to.
This seven piece thin metal die set, Just Because Gift Card Holder is from Anna Griffin. This die set features a butterfly, a cake, and a present, all with frames, and a die to make them into gift card holders. These dies are compatible with leading die cutting machines (sold separately). These dies can be used for gift card holders or used on cards, scrapbook pages, tags, journals, and other paper crafting projects. The largest die measures 5.5" x 4.5". This package also includes an idea sheet.
Gosh it's been a while since I last posted...... apologies! If you follow me on Facebook you will know I've been off at the trade shows both in Pheonix and Frankfurt! We had a fabulous time meeting so many people! Here is a gift card holder I made with the Heartfelt Love collection. It's made from one sheet of paper and so easy to do! Die cut the border and score the papers to the depth you want and glue the bottom flap as a pocket! I used two sheets of paper adhered together for this as I wanted the particular papers as part of my project. It would be a fun project for Mothers Day or a wedding too! Have lots of crafty fun my friends!
Includes: a set of 10 beautifully designed handmade holiday cards and envelopes. Each 3 dimensional card is 5″x7″ and features specialty finishes such as foil, glitter and hand tied ribbon.
Are you having a fabulous week? I am. I worked Monday through Wednesday, so now I have a few days off! I'm so excited. I've been relaxing today and doing a few things around the house while the kids are at school. I love the Cricut Lite Love You A Latte cartr
I am still enjoying all of Anna Griffin images, especially since I subscribe to Cricut Access. I am thrilled that they are included with my Cricut access subscription. I used the Shirt and Tie Holder
Welcome to the Stampin’ Pretty Pals’ Blog Hop! This month, the theme is Fantastic Fun Folds and 3D Projects. We really hope that you enjoy and will be inspired by them! As you hop from blog to…
Welcome! Today I have a pocket card for you using several JustRite Papercraft sets, one of them being the newly released Just Because Vintage Labels, shown below. I was almost finished coloring that pretty label shape at the top when I saw a Splitcoast Stampers gallery and tutorial on Flower Pot Pocket cards. . .Hmmmm--seemed like a fun thing to try! (I'll finish my top label card later.) To cut and emboss the sentiment I used a JustRite custom die set, Vintage Label and Banner Dies. These are the Copic markers that I used to color the floral images on the bottom part of the pot shape. (I stamped them in Memento Rich Cocoa ink.) By the way, before someone asks, there is no special reason that I have a G82 in a Copic Original rather than a Copic Sketch. I think they were out of this color in Copic...
This NAIL POLISH SHAPED CARD INVITE - template and cutting file set features the following: 1 shaped card - approx 5 by 2.5 inches (using the outline shadow) Envelope template 4 assorted invite sheets (they also come several on a...
more money card holders and greeting cards https://www.etsy.com/shop/IndividualExpression?ref=seller-platform-mcnav§ion_id=21244485 Present your Gift Card in a handmade, purse style or pocket, gift card holder, complete with a lot of embellishments (Gift card is NOT INCLUDED, just the holder). The holder has a slot on the inside to place YOUR gift card. made of high-quality beautiful Anna Griffin Christmas card stock and embellishments purse style has embellishments attached to a 1" acetate sleeve that slides on and off the wallet Dimensions: approximately 3." x 5" decorated with SPECIAL DAY greeting so it can interchange greeting cards The gift tag holders come WITH ENVELOPES in a Ziploc bag for protection & safe storage. GIFT CARD NOT INCLUDED handmade in USA Uniquely For You to see more items from my shop, click on the following link https://www.etsy.com/shop/IndividualExpression